1 hour ago, Zonediver said:

I already did this... with no luck

Using the USB tool?

2 hours ago, JorgeB said:

Using the USB tool?

This test is still pending - i will do this tonight because my unraid is a livesys 👍

I will also test the method with rufus.

Edited May 18May 18 by Zonediver

7 hours ago, JorgeB said:

Using the USB tool?

So - i did the installation with the USB Creator Tool and all is working again.

It seems, there must be some weird stuff going on with the format function of Windows 11 PRO...

6 hours ago, Zonediver said:

there must be some weird stuff going on with the format function of Windows 11 PRO...

I'll test that because I think it should still work.

FWIW, I just partitioned a flash drive with Windows 11, copied Unraid 7.2.6, booted, updated to 7.3.0, and it's still booting correctly, so it's not a general Windows issue; it could be with some specific flash drives, or there are other factors at play.

32 minutes ago, JorgeB said:

FWIW, I just partitioned a flash drive with Windows 11, copied Unraid 7.2.6, booted, updated to 7.3.0, and it's still booting correctly, so it's not a general Windows issue; it could be with some specific flash drives, or there are other factors at play.

Thanks for testing - i didnt test it because my server is working now and all is fine.

The strangest thing for me was this:

Lexar_JD_FireFly_AADEO33DRWIDXKE6-0:0 (sdj) 512 15663104 => no partitions

no partition... thats really weird...

Edited May 19May 19 by Zonediver

Just for info.. I have the same problem, will test this solution..
Upgraded to 7.3.1 and webgui does not show up. I can still access the server via SSH.

This is seen in the syslog:

Aug 2 12:55:22 Tower emhttpd: online: SanDisk_Ultra_Fit_4C530001100922112482-0:0 (sde) 512 60063744 => no partitions

1 hour ago, Meph said:

Just for info.. I have the same problem, will test this solution..
Upgraded to 7.3.1 and webgui does not show up. I can still access the server via SSH.

This is seen in the syslog:

Aug 2 12:55:22 Tower emhttpd: online: SanDisk_Ultra_Fit_4C530001100922112482-0:0 (sde) 512 60063744 => no partitions

You will need to backup your USB and recreate it using the USB creator tool, then restore the contents of your backup to the USB.

7.3 is more strict about partitions

21 hours ago, Meph said:

Just for info.. I have the same problem, will test this solution..
Upgraded to 7.3.1 and webgui does not show up. I can still access the server via SSH.

This is seen in the syslog:

Aug 2 12:55:22 Tower emhttpd: online: SanDisk_Ultra_Fit_4C530001100922112482-0:0 (sde) 512 60063744 => no partitions

I removed the USB and put it in my work laptop. Copied the config folder from the USB to my local computer. Downloaded the USB creator tool, put 7.3.1 software on it. When that was done i moved the config folder back to the USB stick and then booted the server. It came up without any issues! :) Problem solved for my part.