wirenut Posted September 1, 2015 Share Posted September 1, 2015 I am away from my box this week traveling with work so i apologize in advance for not being able to provide a diagnostics file, but am curious if this is known/expected behavior or anything to be concerned with. Using version 6.0.1 with notifications set to 4 time a day. The 'parity check started' notification email was generated and received as expected (default setting of midnight/1st of month), then on the proper scheduled time a health status report email was generated and sent 20 minutes later which the contents are pasted below. How is the system 2% into a parity check yet all the array drives report to be in standby?? is there a built in delay or something? I plan to upgrade to v6.1 when i return home the end of the week, just want to make sure nothing needs to be fixed before i do. All subsequent notifications have been as expected. Event: unRAID Status Subject: Notice [TOWER] - array health report [PASS] Description: Array has 17 disks (including parity & cache) Importance: normal Parity - ST4000VN000-1H4168_Z300S53F (sdb) - standby [OK] Disk 1 - WDC_WD20EARX-00PASB0_WD-WCAZAF155312 (sdc) - standby [OK] Disk 2 - WDC_WD10EAVS-14M4B0_WD-WCAV5K646954 (sdd) - standby [OK] Disk 3 - SAMSUNG_HD103SJ_S246J90B803387 (sde) - standby [OK] Disk 4 - WDC_WD10EAVS-14M4B0_WD-WCAV5K646467 (sdo) - standby [OK] Disk 5 - Hitachi_HDS721010CLA332_JP2921HQ1NM24A (sdn) - standby [OK] Disk 6 - WDC_WD20EARX-00PASB0_WD-WCAZAD526865 (sdm) - standby [OK] Disk 7 - SAMSUNG_HD103SJ_S246J90B803389 (sdl) - standby [OK] Disk 8 - WDC_WD20EARX-00PASB0_WD-WCAZAD186069 (sdf) - standby [OK] Disk 9 - ST4000VN000-1H4168_Z3012C6G (sdk) - standby [OK] Disk 10 - WDC_WD20EARX-00PASB0_WD-WCAZAD528316 (sdj) - standby [OK] Disk 11 - WDC_WD30EZRX-00D8PB0_WD-WCC4N0605230 (sdi) - standby [OK] Disk 12 - WDC_WD20EARX-00PASB0_WD-WMAZA9668398 (sdh) - standby [OK] Disk 13 - WDC_WD15EADS-00W4B0_WD-WCAVY6308266 (sdr) - standby [OK] Disk 14 - ST2000VN000-1H3164_W1H21LWW (sdp) - standby [OK] Cache - ST3750528AS_5VP34V7V (sdq) - active 29°C [OK] Cache 2 - WDC_WD1001FALS-41Y6A0_WD-WCATR3406553 (sdg) - active 35°C [OK] Parity check in progress. Total size: 4 TB Elapsed time: 20 minutes Current position: 79.4 GB (2.0 %) Estimated speed: 60.0 MB/sec Estimated finish: 18 hours, 10 minutes Sync errors detected: 0 Quote Link to comment
bonienl Posted September 1, 2015 Share Posted September 1, 2015 There is nothing wrong, what you are seeing is the -- not up to date -- state of the disks report. This is controlled by the setting Tunable (poll_attributes) under Disk settings. Default is 30 minutes (1800), you can lower that to - for example - 15 minutes (900). Quote Link to comment
wirenut Posted September 1, 2015 Author Share Posted September 1, 2015 Ah...got it. Thank you! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.