grjo Posted October 20, 2015 Share Posted October 20, 2015 see logs attached. seems i had some read errors on 1 of my drives but not sure if its related. ran memtest with no errors (only allowed 1 pass) stopped all dockers with same result. even wiped the flash drive and reloaded. different browsers, different machines same result. shrunk syslog down to file size restriction, which makes about 2 days worth of data, but its basically repeats for the last few weeks. do i have a failed drive on ata3? i shut system down and reseated all the cables already syslog.txt Link to comment
grjo Posted October 20, 2015 Author Share Posted October 20, 2015 this is the syslog after a reboot syslog.txt Link to comment
trurl Posted October 21, 2015 Share Posted October 21, 2015 Tools - Diagnostics is preferred for v6. Link to comment
grjo Posted October 21, 2015 Author Share Posted October 21, 2015 Tools - Diagnostics is preferred for v6. i will try - the web interface doesnt fully load most times Link to comment
trurl Posted October 21, 2015 Share Posted October 21, 2015 diagnostics from console or telnet will save the diagnostics zip to your flash. Link to comment
grjo Posted October 21, 2015 Author Share Posted October 21, 2015 diagnostics from console or telnet will save the diagnostics zip to your flash. ahh, ok did that a bit earlier. link-diagnostics-20151020-1656.zip Link to comment
grjo Posted October 21, 2015 Author Share Posted October 21, 2015 bumping up - gui is pretty much useless at this point Link to comment
trurl Posted October 21, 2015 Share Posted October 21, 2015 Oct 11 11:11:42 LINK kernel: ata3.00: ATA-9: Samsung SSD 850 EVO 500GB, S21HNXAG533708E, EMT01B6Q, max UDMA/133 Not entirely sure how to interpret SMART for this drive, but it doesn't say it is failing, and the errors make me suspect a connection issue. Doesn't look like you have powerdown plugin installing, but cd / powerdown at telnet or console should allow you to shutdown unless the drives won't unmount. Link to comment
grjo Posted October 21, 2015 Author Share Posted October 21, 2015 the system shutdown after running the powerdown command. - are you thinking there is a problem with one of the SSD drives? Link to comment
grjo Posted October 22, 2015 Author Share Posted October 22, 2015 2 identical samsung 850 evo cache drives, these stats dont look right... do i have a cable issue? ATA Version: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s) Local Time: Wed Oct 21 19:55:30 2015 CDT SMART support: Available - device has SMART capability. SMART support: Enabled SMART overall-health: Passed ATA Version: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time: Wed Oct 21 19:56:51 2015 CDT SMART support: Available - device has SMART capability. SMART support: Enabled SMART overall-health: Passed Link to comment
grjo Posted October 22, 2015 Author Share Posted October 22, 2015 ok, try this one - my SSD drives were plugged into SATA2 ports (recent upgrade) so after moving them to SATS3 they are now running at full speed, but the web gui is still almost totally unusable. i do have a VM of windows 10 running and when i remote into that the web gui seems to run fine inside the VM, but any other computer it almost doesnt run at all. i also have a bunch of network errors but i tried a new NIC, new switch, new cable etc to rule out other hardware - see newest logs after fixing SSD drives in SATS2 ports... link-diagnostics-20151022-1748.zip Link to comment
grjo Posted October 24, 2015 Author Share Posted October 24, 2015 hoping someone can assist please Link to comment
grjo Posted October 25, 2015 Author Share Posted October 25, 2015 did i not request support properly? i tried changing ip addresses to see if it was network related - same issue - web gui will not fully load and sometimes wont load anything Link to comment
JonathanM Posted October 25, 2015 Share Posted October 25, 2015 did i not request support properly? The forum is mainly peer to peer help, if you want assistance from limetech directly, email [email protected] Email is their preferred method of contact for pressing issues if you can't get the help you need from other users here in the forums. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.