ajgoyt Posted January 3, 2016 Share Posted January 3, 2016 Its been a long month with my CPU I-5 - MB upgrade Gigabyte - GA-Z97X-Gaming, I have maxed out the ram at 32g etc, its been running really good and just for grins i finally turned on Visualization and VTD in the bios (that's it nothing else) and could not get unraid to boot it would hang multiple times and after a couple hard boots (per telent in and try shutdown or reboot commands) did not work. I turned on the box and turned off those 2 settings and it boots fine and i am currently in parity sysnc mode. I thought i read somewhere and for the love of god cannot find the article that talks about this problem! Is there a fix? AJ Link to comment
itimpi Posted January 3, 2016 Share Posted January 3, 2016 There have been reports of some Marvel based disk controllers not playing well with virtualisation enabled. Not sure anyone knows why. Link to comment
ajgoyt Posted January 3, 2016 Author Share Posted January 3, 2016 Ok who can recommend a GOOD compatible board for VM's with this cpu - Intel® Core™ i5-4690K CPU @ 3.50GHz and 32g of DDR3 1,600mhz RAM? I will just switch over the ram -cpu and 2 supermirco controller cards........... got to have at least 3 pci express slots ... something that is proven...... Link to comment
CHBMB Posted January 3, 2016 Share Posted January 3, 2016 Anyone ? You may need to leave it a little longer than an hour and a half... Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.