Roadini Posted May 13, 2016 Share Posted May 13, 2016 Hello Everyone, I Need some help, since moving into our new house my unraid Server doesn't boot anymore. Bios can't find a bootable device. A different usb Stick with free dos boots up just fine. How do I get the Server up and running again? It was Version 6.xx. Thanks in advance. Quote Link to comment
Helmonder Posted May 13, 2016 Share Posted May 13, 2016 Have you tried a filesystem check on the usb ? Just put in your windows machine and give it a check.. Quote Link to comment
Roadini Posted May 13, 2016 Author Share Posted May 13, 2016 Not Jet didn't wanna corrupt anything : ) I ll try that in a Minute. Thanks Quote Link to comment
Roadini Posted May 13, 2016 Author Share Posted May 13, 2016 USB Stick mounted fine under Windows 10. Chkdsk found 0 Errors. Still Boot error. Quote Link to comment
Frank1940 Posted May 13, 2016 Share Posted May 13, 2016 So post us up a picture (or a transcription) of what is on the monitor screen. Quote Link to comment
Roadini Posted May 13, 2016 Author Share Posted May 13, 2016 Hi just boot error (can't find any OS). If I try with a different bootable USB-Stick, it ll boot just fine. Any chance of rebuilding the stick and keep the config? Quote Link to comment
Roadini Posted May 13, 2016 Author Share Posted May 13, 2016 Tried a different USB Stick with newest unraid. Booted just fine. Should I try and upgrade my UNRAID USB-Stick to the newest Unraid Version? Which are the minimum files I should Keep? Quote Link to comment
Frank1940 Posted May 13, 2016 Share Posted May 13, 2016 Tried a different USB Stick with newest unraid. Booted just fine. Should I try and upgrade my UNRAID USB-Stick to the newest Unraid Version? Which are the minimum files I should Keep? You can follow the upgrade instructions here: http://lime-technology.com/forum/index.php?topic=39032.0 At the bottom of the first post is link to a much more detailed WIKI that addresses just about every issue that folks encountered. Be sure that you follow the instructions about backing the contents of your flash drive first!!!! Are you booting unRAID on bare hardware? Quote Link to comment
Roadini Posted May 13, 2016 Author Share Posted May 13, 2016 Thanks works now this is what i did: 1. download newest Version 2. backup all files on usb stick 3. relace all files on root and syslinux 4. run make_bootable script => Started just fine. No Errors and parity check is running at 125 mb/s. Looks good so far. Thanks for your quick responeses! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.