Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

System lost partial configuration?

Featured Replies

Hi,

 

Since two days I find my unRaid server (6.3.3) in problems. The web interface changed from dark to white, no of my apps are visible in main nor are my plugins. I do can access my raid and plex, sab, sonar all seem to be running just fine. unRaid also says I am unlicensed.

 

The docker tab shows the following message:

 

Recommended Applications: None Selected

 

Warning: parse_ini_file(/boot/config/docker.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 39 Fatal error: Uncaught UnexpectedValueException: RecursiveDirectoryIterator::__construct(/boot/config/plugins/dockerMan/templates-user): failed to open dir: No such file or directory in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php:63 Stack trace: #0 /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php(63): RecursiveDirectoryIterator->__construct('/boot/config/pl...', 4096) #1 /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php(92): DockerTemplates->listDir('/boot/config/pl...', 'xml') #2 /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php(222): DockerTemplates->getTemplates('all') #3 /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php(331): DockerTemplates->getTemplateValue('binhex/arch-cou...', 'Registry') #4 /usr/local/emhttp/plugins/community.applications/include/exec.php(44): DockerTemplates->getAllInfo() #5 /usr/local/src/wrap_post.php(27): include('/usr/local/emht...') #6 {main} thrown in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 63

 

 

All I can do is issue a reboot. After that the server comes up fine but “Fix common problems” says it detected an unclean shutdown. I’ve added my diagnostics from after the reboot.

 

Please advise,

Can't look at the diagnostics right now but it's on your flash drive dropped offline. Try putting it in a different controller. Usb2usb3

Sent from my LG-D852 using Tapatalk

There are a bunch of these lines in the syslog from the diagnostics.zip you sent me:

 

May  2 11:01:17 Tower root: error: plugins/unassigned.devices/UnassignedDevices.php: wrong csrf_token

 

Please boot in 'safe mode' to verify things are working then please make sure all your plugins are up-to-date.

9 hours ago, praaphorst said:

I’ve added my diagnostics from after the reboot.

 

8 hours ago, Squid said:

Can't look at the diagnostics right now but it's on your flash drive dropped offline. Try putting it in a different controller. Usb2usb3

I don't see any diagnostics attached or any evidence the OP removed them from the post.

 

I suspect the same as you though, Flash drive unmounted.

  • Author

Hi Admin, thnx for your reply.

 

How do I boot into safe mode and what things would I need to verify?

 

Plugins seem to be up to date. Removed unassigned devices since I am not using it.

  • Author
1 minute ago, trurl said:

 

I don't see any diagnostics attached or any evidence the OP removed them from the post.

 

I suspect the same as you though, Flash drive unmounted.

The diagnostics where sent to limetech by e-mail. If it happens again I will capture the diags and post m here. 

3 minutes ago, praaphorst said:

How do I boot into safe mode

SAFE mode is on the boot menu. If it boots at all I would expect it to work fine until the next time the flash unmounts. Trying a different USB port is probably a good idea.

  • Author
11 minutes ago, trurl said:

SAFE mode is on the boot menu. If it boots at all I would expect it to work fine until the next time the flash unmounts. Trying a different USB port is probably a good idea.

Ok, I'll get a monitor/keyboard attached (if it happens again). Any change it's the flash drive itself? I am using the one internal USB socket (on the motherboard, would dislike to mount it outside the case), the flash drive is a 32 Gb transcend (USB 3.1). 

Edited by praaphorst

3 hours ago, praaphorst said:

Any change it's the flash drive itself?

It might be a good idea to put it in your PC and let it checkdisk, but even if it has corruption that might not be the source of the problem.

  • Author

Good news, no new spontaneous USB-stick dismounts have occurred since I removed the unassigned devices plugin and manually moved some appdata/system files which where supposed to be on the cache (see my other topic). Of course nothing is sure yet or that even unassigned devices was causing the problem.

 

/fingers crossed.

 

 

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.