gambcl Posted September 18, 2017 Share Posted September 18, 2017 (edited) I listed the 9305-16i in my new build post and someone has mentioned that it might not actually be supported in Unraid. Digging a bit more, all I can find is some troubling posts about the 9305-24i not being recognised, which I assume could mean that the 16i version is also not going to work? Has anyone used this 9305 controller successfully? My fallback is the 9207-8i, which I have seen mentioned a few times with success. Thanks, Charlie Edited September 18, 2017 by gambcl Corrected subject Quote Link to comment
JorgeB Posted September 18, 2017 Share Posted September 18, 2017 24 minutes ago, gambcl said: Digging a bit more, all I can find is some troubling posts about the 9305-24i not being recognised, which I assume could mean that the 16i version is also not going to work? It *may* wok with latest unRAID, but IIRC never seen a post of someone using one. 25 minutes ago, gambcl said: My fallback is the 9207-8i, which I have seen mentioned a few times with success. This one works for sure. 1 Quote Link to comment
Limy Posted December 10, 2017 Share Posted December 10, 2017 I can confirm that the LSI HBA 9305-16i works with unraid. All my ssd’s and hard disks are recognized. I just built a server using it along with a Supermicro X11SSZ-TLN4F-O motherboard. 4 1 Quote Link to comment
linusgrip Posted June 2, 2019 Share Posted June 2, 2019 On 12/10/2017 at 6:21 AM, Limy said: I can confirm that the LSI HBA 9305-16i works with unraid. All my ssd’s and hard disks are recognized. I just built a server using it along with a Supermicro X11SSZ-TLN4F-O motherboard. What about TRIM, does that work with that card? Quote Link to comment
JorgeB Posted June 3, 2019 Share Posted June 3, 2019 15 hours ago, linusgrip said: What about TRIM, does that work with that card? It will work with SSDs that support read zeros after trim. 1 Quote Link to comment
Vitalsignser Posted November 25, 2019 Share Posted November 25, 2019 Does it need to be flashed to IT mode? Quote Link to comment
JorgeB Posted November 25, 2019 Share Posted November 25, 2019 59 minutes ago, Vitalsignser said: Does it need to be flashed to IT mode? No, it's IT mode only. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.