FoxyNC Posted October 10, 2021 Share Posted October 10, 2021 On 6/21/2020 at 4:26 AM, Germanus4711 said: I had some success with the following inserted into the <disk> section: <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='hdg' bus='sata'/> <readonly/> </disk> Given that lsscsi revealed: [4:0:0:0] cd/dvd TSSTcorp DVDWBD SH-B123L SB04 /dev/sr0 I confirm it works for me as well. Thanks And I didn't need the lsscsi command as I could find the correct information from the Tools menu and System Devices Quote Link to comment
Pixelpaule Posted January 2, 2022 Share Posted January 2, 2022 (edited) Hello, unfortunately I also have the problem that my drive is detected in Windows Device Manager as an unknown SCSI device and I can't install the appropriate driver. What am I doing wrong? <hostdev mode='subsystem' type='scsi' managed='no'> <source> <adapter name='scsi_host6'/> <address bus='0' target='0' unit='0'/> </source> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </hostdev> Edited January 2, 2022 by Pixelpaule Quote Link to comment
Pixelpaule Posted January 4, 2022 Share Posted January 4, 2022 After I have looked at everything again in peace, it has finally worked. My two Blu ray drives, which are connected to the mainboard via SATA, are now also recognized in freshly set up VMs. I made the mistake all the time and forgot the following line: <controller type='scsi' index='0' model='virtio-scsi'/> 1 Quote Link to comment
Moriarty Posted March 20, 2023 Share Posted March 20, 2023 (edited) On 6/20/2020 at 10:56 PM, Germanus4711 said: I had some success with the following inserted into the <disk> section: <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='hdg' bus='sata'/> <readonly/> </disk> Given that lsscsi revealed: [4:0:0:0] cd/dvd TSSTcorp DVDWBD SH-B123L SB04 /dev/sr0 I can confirm this is the solution worked for me Thanks alot for saving hours of troubleshooting. Edited March 20, 2023 by Moriarty Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.