Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

2 new drives both reported errors during mover, bad drives?

Featured Replies

I am using two new seagate 8tb (ST8000DM004) drives both less than 30 days old ( horrible drives btw ). I woke up this morning with errors on the parity disks (around 5k of them). And smart errors on both drives. Do you guys think this is  a drive issue or some other type of issue. I think its werid BOTH drive would start failing at the SAME time so early. 

 

Quote

ATA Error Count: 198 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 198 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00      07:19:48.623  READ DMA EXT
  27 00 00 00 00 00 e0 00      07:19:48.620  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      07:19:48.600  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      07:19:48.598  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      07:19:48.596  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 197 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00      07:19:43.743  READ DMA EXT
  27 00 00 00 00 00 e0 00      07:19:43.740  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      07:19:43.720  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      07:19:43.718  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      07:19:43.716  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 196 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00      07:19:38.911  READ DMA EXT
  27 00 00 00 00 00 e0 00      07:19:38.907  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      07:19:38.888  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      07:19:38.886  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      07:19:38.883  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 195 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00      07:19:34.110  READ DMA EXT
  27 00 00 00 00 00 e0 00      07:19:34.107  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      07:19:34.088  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      07:19:34.085  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      07:19:34.083  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 194 occurred at disk power-on lifetime: 509 hours (21 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00      07:19:29.446  READ DMA EXT
  27 00 00 00 00 00 e0 00      07:19:29.443  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      07:19:29.423  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      07:19:29.421  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      07:19:29.419  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

 

From syslog

Quote

Mar 20 23:26:26 Icarus root: move: file /mnt/cache/Data/TV/Trailer Park Boys/2005 - Trailer Park Boys - Season 5/Trailer Park Boys - S05E10 - The Shit Blizzard.tbn
Mar 20 23:26:55 Icarus kernel: ata18.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Mar 20 23:26:55 Icarus kernel: ata18.00: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable
Mar 20 23:26:55 Icarus kernel: ata18.00: failed command: READ DMA EXT
Mar 20 23:26:55 Icarus kernel: ata18.00: cmd 25/00:00:18:92:91/00:04:ac:00:00/e0 tag 24 dma 524288 in
Mar 20 23:26:55 Icarus kernel:         res 53/40:00:38:95:91/40:00:ac:00:00/00 Emask 0x8 (media error)
Mar 20 23:26:55 Icarus kernel: ata18.00: status: { DRDY SENSE ERR }
Mar 20 23:26:55 Icarus kernel: ata18.00: error: { UNC }
Mar 20 23:26:55 Icarus kernel: ata18: hard resetting link
Mar 20 23:26:55 Icarus kernel: ata18: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 20 23:26:55 Icarus kernel: ata18.00: configured for UDMA/133
Mar 20 23:26:55 Icarus kernel: ata18: EH complete
Mar 20 23:27:01 Icarus kernel: ata18.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Mar 20 23:27:01 Icarus kernel: ata18.00: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable
Mar 20 23:27:01 Icarus kernel: ata18.00: failed command: READ DMA EXT
Mar 20 23:27:01 Icarus kernel: ata18.00: cmd 25/00:00:18:92:91/00:04:ac:00:00/e0 tag 26 dma 524288 in
Mar 20 23:27:01 Icarus kernel:         res 53/40:00:38:95:91/40:00:ac:00:00/00 Emask 0x8 (media error)
Mar 20 23:27:01 Icarus kernel: ata18.00: status: { DRDY SENSE ERR }
Mar 20 23:27:01 Icarus kernel: ata18.00: error: { UNC }
Mar 20 23:27:01 Icarus kernel: ata18: hard resetting link
Mar 20 23:27:02 Icarus kernel: ata18: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 20 23:27:02 Icarus kernel: ata18.00: configured for UDMA/133
Mar 20 23:27:02 Icarus kernel: sd 22:0:0:0: [sdl] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Mar 20 23:27:02 Icarus kernel: sd 22:0:0:0: [sdl] tag#26 Sense Key : 0x3 [current] 
Mar 20 23:27:02 Icarus kernel: sd 22:0:0:0: [sdl] tag#26 ASC=0x16 ASCQ=0x0 
Mar 20 23:27:02 Icarus kernel: sd 22:0:0:0: [sdl] tag#26 CDB: opcode=0x88 88 00 00 00 00 00 ac 91 92 18 00 00 04 00 00 00
Mar 20 23:27:02 Icarus kernel: print_req_error: I/O error, dev sdl, sector 2895221272
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221208
Mar 20 23:27:02 Icarus kernel: ata18: EH complete
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221216
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221224
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221232
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221240
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221248
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221256
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221264
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221272
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221280
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221288
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221296
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221304
Mar 20 23:27:02 Icarus kernel: md: disk29 read error, sector=2895221312

ETC....

 

ST8000DM004-2CX188_WCT09B3G-20180321-0856.txt

ST8000DM004-2CX188_WCT09B3G-20180321-0859.txt

syslog.1.txt

  • Community Expert

It's strange the same number of UNC on both, and with a bogus LBA, run an extended test on both.

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.