[email protected] Posted April 19, 2018 Share Posted April 19, 2018 Hello, I changed disks yesterday, everything seemed to work. The rebuild of the parity drive began. But after some time the GUI "crashes". Normally I run with custom banner and the "black" theme, but it just look like this. Terminal window works. What can I do? Link to comment
trurl Posted April 19, 2018 Share Posted April 19, 2018 Moving to General Support since this is not a Defect Report Link to comment
trurl Posted April 19, 2018 Share Posted April 19, 2018 Can you get to the command line? Link to comment
John_M Posted April 19, 2018 Share Posted April 19, 2018 Since you say that the Terminal window works, open it and type diagnostics and wait for it to gather the information and store it on your boot flash device, then poweroff to attempt to shut down cleanly. Then you can remove the flash device and plug it into your PC. Copy the diagnostics zip file from the logs folder and attach to your next post. Link to comment
[email protected] Posted April 19, 2018 Author Share Posted April 19, 2018 Thank you.. Here is the file. Tried to update to the latest RC, but still the same.. unraid-diagnostics-20180419-1456.zip Link to comment
trurl Posted April 19, 2018 Share Posted April 19, 2018 You have a problem with your flash drive. Put it in your PC and let it checkdisk. Could also be a problem with the port it's using. Link to comment
[email protected] Posted April 19, 2018 Author Share Posted April 19, 2018 A checkdisk has been run on the flash drive and the USB port is changed. It has an uptime on 3 hours now, without a issue. Fingers crossed Thank you! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.