mrsplitrobot Posted May 27, 2019 Share Posted May 27, 2019 after upgrading my server I now have 2x missing/wrong drives which one is my parity, what can i do to fix this ? Link to comment
JonathanM Posted May 27, 2019 Share Posted May 27, 2019 Need more info. What did you change? Post your current diagnostics zip file, and it would be nice if you had a diagnostics file from before when everything worked. Link to comment
mrsplitrobot Posted May 27, 2019 Author Share Posted May 27, 2019 unfortunately i do not have a diagnostics file from before, i moved the hdd's to a new computer and had to replace the usb as it snapped Link to comment
mrsplitrobot Posted May 28, 2019 Author Share Posted May 28, 2019 tower-diagnostics-20190528-0720.zip Link to comment
JorgeB Posted May 28, 2019 Share Posted May 28, 2019 This is because you were using a raid controller, do a new config, re-assign all disks to the original slots and check "parity is already valid" before starting the array. Link to comment
mrsplitrobot Posted May 28, 2019 Author Share Posted May 28, 2019 will i lose my data ? Link to comment
JorgeB Posted May 28, 2019 Share Posted May 28, 2019 Not as long as you assign all the disks to the original slots, and assuming the raid controller didn't use a non standard partition, but if any data disk comes up as unmountable don't format. Link to comment
mrsplitrobot Posted May 28, 2019 Author Share Posted May 28, 2019 Thank you very much, back up and running Sent from my iPhone using Tapatalk Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.