mgworek Posted June 17, 2019 Share Posted June 17, 2019 It probably has nothing to do with 6.7 but I know thats when it started. All the rc's were fine. I reboot and it runs fine for another week. I bought another device to replace this one of it is going bad. I was able to grab the log file before shutting down the system. I've been meaning to post about it just having had the chance to grab the log before a reboot. at 1:51am this started flooding my logs. un 17 01:51:40 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:51:47 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:52:19 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:52:50 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:52:57 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:53:02 Tower kernel: FAT-fs (sda1): FAT read failed (blocknr 7360) Jun 17 01:53:02 Tower kernel: FAT-fs (sda1): unable to read inode block for updating (i_pos 78609844) Jun 17 01:53:29 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:53:59 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:54:01 Tower kernel: FAT-fs (sda1): FAT read failed (blocknr 7360) Jun 17 01:54:01 Tower kernel: FAT-fs (sda1): unable to read inode block for updating (i_pos 78609844) Jun 17 01:54:06 Tower kernel: FAT-fs (sda1): bread failed in fat_clusters_flush Jun 17 01:54:33 Tower kernel: usb 8-2: reset high-speed USB device number 2 using xhci_hcd Jun 17 01:55:01 Tower kernel: FAT-fs (sda1): FAT read failed (blocknr 7360) Thanks syslog.txt Link to comment
Squid Posted June 17, 2019 Share Posted June 17, 2019 Try a different port. Ideally, USB 2 Link to comment
mgworek Posted June 18, 2019 Author Share Posted June 18, 2019 On 6/17/2019 at 11:59 AM, Squid said: Try a different port. Ideally, USB 2 It died again today so switched it to a USB 2 port and see what happens. It's just weird it's been fine for over a year where it was. Like I said, I have a spare if it continues to happen. Thanks Link to comment
mgworek Posted June 26, 2019 Author Share Posted June 26, 2019 So far, a week after switching USB ports, everything seems to be working. Thanks! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.