Digital Posted January 1, 2020 Share Posted January 1, 2020 (edited) Hello, Currently I use one WIN10 VM on UNRAID 6.8.0-RC9. Here is my physical device: Quote Model: Custom M/B: ASUSTeK COMPUTER INC. ROG STRIX X570-F GAMING Version Rev X.0x - s/n: 190755062801345 BIOS: American Megatrends Inc. Version 1405. Dated: 11/19/2019 CPU: AMD Ryzen 9 3900X 12-Core @ 3800 MHz HVM: Enabled IOMMU: Enabled Cache: 768 KiB, 6144 KiB, 65536 KiB Memory: 64 GiB DDR4 (max. installable capacity 128 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 4.19.88-Unraid x86_64 OpenSSL: 1.1.1d Before Unraid I tried a win10 OS to verify if all devices works correctly and all are OK. However with Unraid I see one problem on WIN 10 VM. The speed test is limited to 10Mbps to download and the upload is normal. Do you know if unraid to configure automaticaly a limit to download ? Thank you for your support Edited January 1, 2020 by Digital Quote Link to comment
trurl Posted January 1, 2020 Share Posted January 1, 2020 What are you downloading to? A disk in the parity array or what? Quote Link to comment
Digital Posted January 1, 2020 Author Share Posted January 1, 2020 (edited) Hello, I am creating my environnement and the download is not really good I need to have a good download for dirrent solution. my connection is ok but on my VM I can't to have more in the downlaod. Here is my disks: To try the connection I used this link: https://www.speedtest.net/ Edited January 1, 2020 by Digital Quote Link to comment
itimpi Posted January 1, 2020 Share Posted January 1, 2020 Having SSD’s in the array is not an officially supported configuration. Array disks cannot be ‘trimmed’ which means that performance of the SSDs is likely to degrade over time. In addition it is likely to be a waste as write performance is determined by the slower of the drives involved and the parity drive. SSD’s are normally used instead either as part of the cache or as Unassigned Devices as that gives much better performance. 1 Quote Link to comment
trurl Posted January 1, 2020 Share Posted January 1, 2020 Did you not understand my question? 1 hour ago, trurl said: What are you downloading to? A disk in the parity array or what? Quote Link to comment
Digital Posted January 1, 2020 Author Share Posted January 1, 2020 Hello, Thank you very much for your feedback. With the details from @itimpi I understand your question @trurl Now I understand the problem Thank you. Quote Link to comment
Digital Posted January 3, 2020 Author Share Posted January 3, 2020 (edited) Hello, I come back for the same problem I recreated a new unraid to remove the parity and verify if my problem is solved. And now I have the same device without the parity and I used the same vdisk.img for my VM. This one is present on NVME in the cache part. And the speedtest is always the same... Do you have any ideas to solved this problem ? FYI: My connection is working correctly when I tried a speedtest in SSH on the unraid server. Thank you in advance. Edited January 3, 2020 by Digital Quote Link to comment
Digital Posted January 3, 2020 Author Share Posted January 3, 2020 I see only now this topic: Do you think that will solve my problem? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.