Jump to content
kingtony911

(Solved) No hard drives

5 posts in this topic Last Reply

Recommended Posts

Hey!

 

Recently upgrade to 6.8.1 and now having an issue after a reboot. None of my drives plugged into my RAID card are being seen by the OS. When I go into the raid card software all drives are found. Have re-seated the card. Still no luck. 

 

Thanks!

Tony 

 

 

nasa-diagnostics-20200114-1929.zip

Edited by kingtony911

Share this post


Link to post

It's a problem with the HBA, but one I've never seen before:

Jan 14 19:26:34 NASA kernel: mpt3sas version 26.100.00.00 loaded
Jan 14 19:26:34 NASA kernel: mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
Jan 14 19:26:34 NASA kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32850464 kB)
Jan 14 19:26:34 NASA kernel: mpt2sas_cm0: unable to map adapter memory!  or resource not found
Jan 14 19:26:34 NASA kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10684/_scsih_probe()!

 

Make sure you're using latest bios for board and firmware for the HBA, you can also try a different PCIe slot if available.

Share this post


Link to post

Hello,

 

I will update the BIOS when I get home. Just noticed I am running a VERY old version (Thank you).

 

On a side note, in testing i went back to 6.8.0 and the server and all drives came up correctly. 

 

More updates to come later! 

Share this post


Link to post

Same problem as before, looks like an issue with this kernel release and the LSI on your board, but can't tell you were the fault is, the board, the kernel or the LSI driver.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.