rohlando Posted January 15, 2020 Share Posted January 15, 2020 I am evaluating UnRaid at the moment, just setting it up on a HP Proliant 1U Server with 2 onboard Interfaces along with an additional card for an additional 2 Interfaces. When reviewing the Network Settings, I see within the Interface Rules all 4 Interfaces with the proper MAC addresses, however above I see all Interfaces with the same MAC address. I have removed the /boot/config/network.cfg file a few times without any effect. I have also booted up the server with just a single Interface and had the same results. Like what the product can be if I can get to the bottom of this. Quote Link to comment
bonienl Posted January 15, 2020 Share Posted January 15, 2020 All MAC addresses are presented the same because the interfaces are grouped together in a bonded interface. If you want individual interfaces, you'll need to take them out of the bonded interface (or disable bonding altogether) Quote Link to comment
rohlando Posted January 15, 2020 Author Share Posted January 15, 2020 I have removed the bond several times, when doing so I loose all connection to UNRAID server. Taking a look at the server after reboots, ifconfig still displays all the same mac address on each of the interfaces. Quote Link to comment
rohlando Posted January 15, 2020 Author Share Posted January 15, 2020 I was able to resolve by deleting all bonds, removal of the 2nd card, remove network.cfg reboot with a single connection. Once I did that I added the card back and rebooted. They all now show correctly. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.