kysdaddy Posted January 31, 2020 Share Posted January 31, 2020 Hello, would someone like to help me figure out what idiotic mistake I am making now? I added 5 2tb drives to my array. I pre cleared them and then added them to the array, with no issues. the next day all 5 drives showed up in unassigned devices again but with different id's. The array seems to be fine, I doubt if these phantom drives are hurting anything but they shouldn't be there and I'm enough of a screw up that having them there opens the door to some horrible operator malfunctions. Any suggestions are appreciated. Quote Link to comment
testdasi Posted January 31, 2020 Share Posted January 31, 2020 As always. Tools -> Diagnostics -> attach zip file. 1 Quote Link to comment
JorgeB Posted January 31, 2020 Share Posted January 31, 2020 Diags would confirm but that looks like SAS multipath related, Unraid doesn't support that, if you're using some kind of SAS enclosure with dual controllers connect just one to Unraid. Quote Link to comment
kysdaddy Posted February 1, 2020 Author Share Posted February 1, 2020 Yes, thank you. I am using an MD1000 with dual controllers I will research steps to use just one. Thank you Quote Link to comment
JorgeB Posted February 2, 2020 Share Posted February 2, 2020 10 hours ago, kysdaddy said: I will research steps to use just one. You just need to disconnect one of the cables, have just one controller connected to the HBA. Quote Link to comment
kysdaddy Posted February 2, 2020 Author Share Posted February 2, 2020 That was tough, step one. disconnect the second controller. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.