qmatic Posted March 17, 2020 Share Posted March 17, 2020 Currently have a Synology with 4x8tb drives running SHR1. Currently have about 15tb used. I have bought two new 14tb drives to put into my upcoming unraid build. Here's what I was planning to do: Install the two new 14tb drives without parity at first to have enough drive space for data from the synology Copy files from synology to unraid server Shut down synology and remove the 4x8tb hard drives Put the 4x8tb into unraid server and format Make one of the 14tb drives a parity drive Is this possible or is there a better way? Thanks! Quote Link to comment
trurl Posted March 17, 2020 Share Posted March 17, 2020 I think you left out a step between 4 and 5. Move data from one of those 14TB drives to those drives formatted in step 5, so you can use that 14TB drive as parity. Do you have another copy of anything important and irreplaceable? Quote Link to comment
qmatic Posted March 17, 2020 Author Share Posted March 17, 2020 That makes sense! If I'm to understand this correctly, the 14tb drives are just treated as seperate drives until I set up a parity drive correct? I don't have anything that's really irreplaceable but it would be a hassle to have to reacquire them. Quote Link to comment
Dissones4U Posted March 18, 2020 Share Posted March 18, 2020 1 hour ago, qmatic said: If I'm to understand this correctly, the 14tb drives are just treated as seperate drives until I set up a parity drive correct? Technically they're JBOD, even with parity as there is no striping. For example if you have a 5 disk array with single parity and lose 3 out of 5 disks the single good data disk is completely intact and readable. The good disk can easily be removed and plugged into another device with the contents fully intact. Now depending on how you set your shares to split, you may have some incomplete seasons. I think most recommend to set the split so that entire seasons stay on the same disk. That way you may lose some seasons but the ones you have will be complete but I digress, yeah, it's pretty much JBOD + parity. Quote Link to comment
qmatic Posted March 18, 2020 Author Share Posted March 18, 2020 42 minutes ago, Dissones4U said: Technically they're JBOD, even with parity as there is no striping. For example if you have a 5 disk array with single parity and lose 3 out of 5 disks the single good data disk is completely intact and readable. The good disk can easily be removed and plugged into another device with the contents fully intact. Now depending on how you set your shares to split, you may have some incomplete seasons. I think most recommend to set the split so that entire seasons stay on the same disk. That way you may lose some seasons but the ones you have will be complete but I digress, yeah, it's pretty much JBOD + parity. Thanks! I have a better understanding of it now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.