drjUnraid Posted August 21, 2020 Share Posted August 21, 2020 Hi All, I've had a couple issues with my array lately. In 3 weeks I've had Disk 4 go disabled and become not mountable (Replaced and rebuilt), Disk 1 XFS File corruption (repaired file system), and now yesterday Disk 1 is showing at Device Disabled. I could hear it spinning up, then spinning back down. I downloaded Diags, rebooted, and it sounds ok and passed a SMART test. Disk 1 is a pretty new disk. Seems like some gremlins? I'm buying new Sata Cables to try. Should I try a new Power Supply (curerntly a 700W from 2013). Is my motherboard taking a crap? These HW issues are driving me nuts lately Diag and Smart report attached To fix disk 1 I'm going to rebuild it onto a spare 12TB I have. Disable Array, replace disk 1 in array with spare 12TB, restart and repair array. I'll keep the original 12TB Disk 1 in case something bad happens during rebuild. nas4x12-smart-20200820-1953.zip nas4x12-diagnostics-20200819-2249.zip Quote Link to comment
trurl Posted August 21, 2020 Share Posted August 21, 2020 Do you have any spare ports? Try to use your intel ports and not the Marvell ports. Quote Link to comment
drjUnraid Posted August 21, 2020 Author Share Posted August 21, 2020 I do not have any spare ports. I have an PCIe card with 4 ports, but that is also marvel chip. Is there a PCI card with Intel, I will search. Maybe an LSI card? Also one other question, I'm currently doing a rebuild; can I pause the rebuild, power down, power up, and resume rebuild? Quote Link to comment
trurl Posted August 21, 2020 Share Posted August 21, 2020 Rebuild will start over from beginning. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.