tknx Posted October 25, 2020 Share Posted October 25, 2020 (edited) I just moved from a server motherboard setup to a consumer one - switching from X9DRi-LN4F+ 2x 2650s to a MSI B460 motherboard and Intel i3-10100. LSI card I just switched over. Removed the SFP+ card for now and the Nvidia Quadro P2000. 1. FIrst, it wouldn't see it - fine - I renamed EFI- to EFI. Fixed. 2. It couldn't connect to the eth ports I had it set to from before, so I forced it to rebuild network.cfg. Now it just gets a self-assigned IP address. This is on the 2.5G port. On the 1G port, it doesn't even see it. Any thoughts on how I can get this working? Edited October 25, 2020 by tknx Quote Link to comment
tknx Posted October 25, 2020 Author Share Posted October 25, 2020 Here is my diagnostis file - I switched the LSI card and network card since I was worried about lanes, but then went back to having network problems. I need to probably understand why neither of the onboard network cards is being recognized (one is Intel and one is Realtek)/ mnemosyne-diagnostics-20201024-1936.zip Quote Link to comment
tknx Posted October 25, 2020 Author Share Posted October 25, 2020 So another thought I am having is that I could use the 6.9 betas since I am on 6.8.3 Nvidia. Quote Link to comment
JorgeB Posted October 25, 2020 Share Posted October 25, 2020 NIC is not supported by v6.8.x, use v6.9-beta. Quote Link to comment
tknx Posted October 25, 2020 Author Share Posted October 25, 2020 Got it - also I had stuck in an M2 NVME to maybe use but it stole lanes from the network card PCI slot so that messed things up. Now just to get intel GPU working for transcoding. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.