mattcrem Posted October 30, 2020 Share Posted October 30, 2020 Recently some SMART errors started apprearing on one of my hard disks and my cache disk (I only have one SSD used as cache and It has some vms and other items that I store directly on it) below is what I am getting: MY HDD Smart Status is showing the below (I have errors on #197 and #198: ATTRIBUTES # ATTRIBUTE NAME FLAG VALUE WORST THRESHOLD TYPE UPDATED FAILED RAW VALUE 1 Raw read error rate 0x000f 102 088 006 Pre-fail Always Never 4021824 3 Spin up time 0x0003 095 094 000 Pre-fail Always Never 0 4 Start stop count 0x0032 098 098 020 Old age Always Never 2340 5 Reallocated sector count 0x0033 100 100 010 Pre-fail Always Never 0 7 Seek error rate 0x000f 078 060 030 Pre-fail Always Never 8747087847 9 Power on hours 0x0032 065 065 000 Old age Always Never 31220 (3y, 6m, 21d, 20h) 10 Spin retry count 0x0013 100 100 097 Pre-fail Always Never 0 12 Power cycle count 0x0032 098 098 020 Old age Always Never 2248 183 Runtime bad block 0x0032 100 100 000 Old age Always Never 0 184 End-to-end error 0x0032 100 100 099 Old age Always Never 0 187 Reported uncorrect 0x0032 100 100 000 Old age Always Never 0 188 Command timeout 0x0032 100 100 000 Old age Always Never 0 0 0 189 High fly writes 0x003a 100 100 000 Old age Always Never 0 190 Airflow temperature cel 0x0022 057 045 045 Old age Always In the past 43 (min/max 23/48) 191 G-sense error rate 0x0032 100 100 000 Old age Always Never 0 192 Power-off retract count 0x0032 100 100 000 Old age Always Never 172 193 Load cycle count 0x0032 013 013 000 Old age Always Never 175626 194 Temperature celsius 0x0022 043 055 000 Old age Always Never 43 (0 13 0 0 0) 197 Current pending sector 0x0012 100 100 000 Old age Always Never 32 198 Offline uncorrectable 0x0010 100 100 000 Old age Offline Never 32 199 UDMA CRC error count 0x003e 200 200 000 Old age Always Never 0 240 Head flying hours 0x0000 100 253 000 Old age Offline Never 29091h+44m+48.259s 241 Total lbas written 0x0000 100 253 000 Old age Offline Never 14692012755 242 Total lbas read 0x0000 100 253 000 Old age Offline Never 245614326568 MY SSD is showing the following errors on #5 and #187: ATTRIBUTES # ATTRIBUTE NAME FLAG VALUE WORST THRESHOLD TYPE UPDATED FAILED RAW VALUE 5 Reallocated sector count 0x0033 099 099 010 Pre-fail Always Never 2 9 Power on hours 0x0032 096 096 000 Old age Always Never 16037 (1y, 9m, 29d, 5h) 12 Power cycle count 0x0032 098 098 000 Old age Always Never 1113 177 Wear leveling count 0x0013 037 037 000 Pre-fail Always Never 1339 179 Used rsvd block count tot 0x0013 099 099 010 Pre-fail Always Never 2 181 Program fail count total 0x0032 100 100 010 Old age Always Never 0 182 Erase fail count total 0x0032 100 100 010 Old age Always Never 0 183 Runtime bad block 0x0013 099 099 010 Pre-fail Always Never 2 187 Uncorrectable error count 0x0032 099 099 000 Old age Always Never 2 190 Airflow temperature cel 0x0032 069 053 000 Old age Always Never 31 195 ECC error rate 0x001a 199 199 000 Old age Always Never 2 199 CRC error count 0x003e 100 100 000 Old age Always Never 0 235 POR recovery count 0x0012 099 099 000 Old age Always Never 86 241 Total lbas written 0x0032 099 099 000 Old age Always Never 151651063719 Should I be expecting any failures soon? Anything I can do about it (other than replacing)? Quote Link to comment
JorgeB Posted October 30, 2020 Share Posted October 30, 2020 Run an extended SMART test on the disk, SSD should be fine for now. Quote Link to comment
mattcrem Posted October 30, 2020 Author Share Posted October 30, 2020 5 hours ago, JorgeB said: Run an extended SMART test on the disk, SSD should be fine for now. Just finished, attached the report ST2000DM001-1CH164_Z340CGBC-20201030-1137.txt Quote Link to comment
JorgeB Posted October 30, 2020 Share Posted October 30, 2020 SMART test was successful, this means the pending sectors are false positives and can be ignored, at least for now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.