NVrEnough

In an attempt to speed up syncing, I copied the contents of mainnet and wallet db folders to my docker from a synced windows install. For some reason it's not syncing. I have port 8444 forwarded to my unraid server ip and can see one full node connected when I issue: docker exec -it chia venv/bin/chia show -s -c but after changing log level I am noticing this quite frequently: 2021-05-11T00:38:14.486 full_node full_node_server : [32mINFO [0m Cannot connect to host 95.82.254.21:8444 ssl:True [SSLCertVerificationError: (1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: certificate is not yet valid (_ssl.c:1123)')][0m Any ideas? UPDATE- Never mind this question, forcing an update fixed my issue....

Good point, I should have been clearer. By "drive" I assumed one would automatically use an Unraid "share" - but that may not always be the case. My setup has separate unraid "shares" for storj identity and data. No other "shares" are located on the "drives" containing storj data. Sorry for the confusion. After further research many small node operators don't recommend having local parity/redundancy as the network does that already. I may try something with unassigned devices, if possible, just not sure yet. I also couldn't get the container to start/validate/initialize...whatever. Then I moved my identity share off my appdata cache pool share thinking the "bind mount point" was causing an issue... guess it was the "setup=true" command that I NEVER used that was really the problem... Somehow it still worked. Guess it was dumb luck.

Try moving your "identity" to the same drive your data is stored on. I first tried "appdata" as well and ran into an error. My extra parameters are: --stop-timeout 300 --mount type=bind,source="/mnt/user/storjid/identity/storagenode/",destination=/app/identity --mount type=bind,source="/mnt/user/storj/",destination=/app/config You didn't mention if you remembered to port forward TCP PORT 28967 in your router to your Storj container.

Its safest to just start another node. You could check Storj forum resize search for some help....

I have an almost identical setup with the exception of my "identity" not being located in "appdata" - instead I created a separate user share: --mount type=bind,source="/mnt/user/storjid/identity/storagenode/",destination=/app/identity --mount type=bind,source="/mnt/user/storj/",destination=/app/config Your errors are subfolders normally created at runtime from your extra parameter statement: Could there be a permission error with your "/mnt/user/storj" user share causing this issue?

Not sure what happened but it works now. I left it broken last night and after reading your reply was getting ready to try again but.... no need. I ran your script twice last night with the same results, but I didn't force update the docker. I appreciate your quick response, your knowledge is appreciated. Thanks again.

First, thank you for your fix above - it worked perfect... then came the next container update.... same error but your fix returns an error where there was none last time. Any idea how to fix this error? Here is the entire interaction with your fix: root@3e69a0cc162f:/# PHP_VER="7.3.25" && \ > BUILD_PACKAGES="wget build-base php7-dev" && \ > > apk add --no-cache --virtual .php-build-dependencies $BUILD_PACKAGES && \ > apk add --no-cache --repository https://dl-3.alpinelinux.org/alpine/edge/testing/ gnu-libiconv-dev && \ > (mv /usr/bin/gnu-iconv /usr/bin/iconv; mv /usr/include/gnu-libiconv/*.h /usr/include; rm -rf /usr/include/gnu-libiconv) && \ > mkdir -p /opt && \ > cd /opt && \ > wget https://secure.php.net/distributions/php-$PHP_VER.tar.gz && \ > tar xzf php-$PHP_VER.tar.gz && \ > cd php-$PHP_VER/ext/iconv && \ > phpize && \ > ./configure --with-iconv=/usr && \ > make && \ > make install && \ > mkdir -p /etc/php7/conf.d && \ > #next command not needed in LSIO Docker > #echo "extension=iconv.so" >> /etc/php7/conf.d/iconv.ini && \ > > apk del .php-build-dependencies && \ > rm -rf /opt/* fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/main/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/community/x86_64/APKINDEX.tar.gz (1/1) Upgrading .php-build-dependencies (20201205.073029 -> 20201205.074158) OK: 558 MiB in 240 packages fetch https://dl-3.alpinelinux.org/alpine/edge/testing/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/main/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/community/x86_64/APKINDEX.tar.gz OK: 558 MiB in 240 packages mv: cannot stat '/usr/bin/gnu-iconv': No such file or directory mv: cannot stat '/usr/include/gnu-libiconv/*.h': No such file or directory --2020-12-05 01:41:59-- https://secure.php.net/distributions/php-7.3.25.tar.gz Resolving secure.php.net (secure.php.net)... 185.85.0.29 Connecting to secure.php.net (secure.php.net)|185.85.0.29|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://www.php.net/distributions/php-7.3.25.tar.gz [following] --2020-12-05 01:42:00-- https://www.php.net/distributions/php-7.3.25.tar.gz Resolving www.php.net (www.php.net)... 185.85.0.29 Connecting to www.php.net (www.php.net)|185.85.0.29|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 19675266 (19M) [application/octet-stream] Saving to: 'php-7.3.25.tar.gz.1' php-7.3.25.tar.gz.1 100%[=============================================================>] 18.76M 9.79MB/s in 1.9s 2020-12-05 01:42:03 (9.79 MB/s) - 'php-7.3.25.tar.gz.1' saved [19675266/19675266] Configuring for: PHP Api Version: 20180731 Zend Module Api No: 20180731 Zend Extension Api No: 320180731 checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-pc-linux-musl checking host system type... x86_64-pc-linux-musl checking target system type... x86_64-pc-linux-musl checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php7 -I/usr/include/php7/main -I/usr/include/php7/TSRM -I/usr/include/php7/Zend -I/usr/include/php7/ext -I/usr/include/php7/ext/date/lib checking for PHP extension directory... /usr/lib/php7/modules checking for PHP installed headers prefix... /usr/include/php7 checking if debug is enabled... no checking if zts is enabled... no checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... no checking for awk... awk checking if awk is broken... no checking for iconv support... yes, shared checking for libiconv in -liconv... yes checking if iconv is glibc's... no checking if using GNU libiconv... no checking if iconv is Konstantin Chuguev's... no checking if using IBM iconv... no checking if iconv supports errno... yes checking if iconv supports //IGNORE... no checking if your cpp allows macro usage in include lines... yes checking for ld used by cc... /usr/x86_64-alpine-linux-musl/bin/ld checking if the linker (/usr/x86_64-alpine-linux-musl/bin/ld) is GNU ld... yes checking for /usr/x86_64-alpine-linux-musl/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/x86_64-alpine-linux-musl/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h config.status: config.h is unchanged /bin/sh /opt/php-7.3.25/ext/iconv/libtool --mode=compile cc -I"/usr/include" -DZEND_ENABLE_STATIC_TSRMLS_CACHE=1 -I. -I/opt/php-7.3.25/ext/iconv -DPHP_ATOM_INC -I/opt/php-7.3.25/ext/iconv/include -I/opt/php-7.3.25/ext/iconv/main -I/opt/php-7.3.25/ext/iconv -I/usr/include/php7 -I/usr/include/php7/main -I/usr/include/php7/TSRM -I/usr/include/php7/Zend -I/usr/include/php7/ext -I/usr/include/php7/ext/date/lib -DHAVE_CONFIG_H -I/usr/include -g -O2 -c /opt/php-7.3.25/ext/iconv/iconv.c -o iconv.lo mkdir .libs cc -I/usr/include -DZEND_ENABLE_STATIC_TSRMLS_CACHE=1 -I. -I/opt/php-7.3.25/ext/iconv -DPHP_ATOM_INC -I/opt/php-7.3.25/ext/iconv/include -I/opt/php-7.3.25/ext/iconv/main -I/opt/php-7.3.25/ext/iconv -I/usr/include/php7 -I/usr/include/php7/main -I/usr/include/php7/TSRM -I/usr/include/php7/Zend -I/usr/include/php7/ext -I/usr/include/php7/ext/date/lib -DHAVE_CONFIG_H -I/usr/include -g -O2 -c /opt/php-7.3.25/ext/iconv/iconv.c -fPIC -DPIC -o .libs/iconv.o /opt/php-7.3.25/ext/iconv/iconv.c: In function 'zm_startup_miconv': /opt/php-7.3.25/ext/iconv/iconv.c:287:4: error: '_libiconv_version' undeclared (first use in this function) 287 | _libiconv_version >> 8, _libiconv_version & 0xff); | ^~~~~~~~~~~~~~~~~ /opt/php-7.3.25/ext/iconv/iconv.c:287:4: note: each undeclared identifier is reported only once for each function it appears in /opt/php-7.3.25/ext/iconv/iconv.c: In function '_php_iconv_appendl': /opt/php-7.3.25/ext/iconv/iconv.c:184:15: warning: implicit declaration of function 'libiconv'; did you mean 'iconv'? [-Wimplicit-function-declaration] 184 | #define iconv libiconv | ^~~~~~~~ /opt/php-7.3.25/ext/iconv/iconv.c:468:8: note: in expansion of macro 'iconv' 468 | if (iconv(cd, (char **)&in_p, &in_left, (char **) &out_p, &out_left) == (size_t)-1) { | ^~~~~ make: *** [Makefile:194: iconv.lo] Error 1 root@3e69a0cc162f:/opt/php-7.3.25/ext/iconv# any feedback/help is greatly appreciated.

Without more info on your setup it sounds like a webui problem. I assume, which always gets me in trouble, that you are routing qb "through" another container - specifically a VPN container? Can you send more specifics on your setup? Could you be missing the necessary "port" variable addition needed to route the qb webui through the VPN container? I am unable to reproduce the error your getting. I routed my containers following this video: Spaceinvader "How to route any docker container..."

I had same issue and had to rollback to 4.2.5 to fix it. This issue is well documented at reddit. I ended up adding "tag" to the docker "repository" field. Edit the docker container repository field to this: linuxserver/qbittorrent:14.2.5.99202004250119-7015-2c65b79ubuntu18.04.1-ls93 Hope this helps...