dodgeman

JorgeB Thanks that was exactly what I was looking for.

Could you point me in the right direction to start that new config/parity sync. Yes the drives are fully readable with no SMART issues being reported.

After the machine booted the drives were listed as not installed. I looked under unassigned and they were listed there. I then ran XFS check and found no issues. I then shutdown and moved the drives from the backplane to SATA cables. They still showed up in unassigned and you can view the data on them. I pulled the drives from the system currently and I tried to replace them but that is not an option as the array is listed as an invalid configuration when I add new disks.

The disks not installed show up in the unassigned devices tab. I tried the drive connected to the backplane and to SATA ports on the motherboard, trying to removing cabling and controller issues.

mhs-diagnostics-20211109-0915.zip

Well after moving motherboard to a new chassis, I ran into a overheating issue at night, and now I have a situation where the only way to get the array online is with 1 parity drive out of the array, and 2 drives while installed show up under unassigned devices. I can add new drives to the pool for either the parity or the file system. Is there a way to rectify this without starting over ? I ran XFS check on the drives and they had not issues, I also read them on another system and pulled them to protect the data but I cannot put in replacement drives to rebuild the array. I went through the what to do with file system issues but I cannot find a matching issue to address this.

Looks to be an index server side issue its gone now.

Getting Indexer failed to release, turned on debug logs and found this; 2021-08-30 06:53:11.4|Error|ReleaseModule|Downloading nzb failed [v3.2.2.5080] NzbDrone.Core.Exceptions.ReleaseDownloadException: Downloading nzb failed ---> System.Net.WebException: Failed to read complete http response ---> System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream. I getting listing but never finish the download of the nzb.

Well it appears that I have the issue with routing through the updated docker for delugevpn, there are a bunch of post of required changes. Thanks

Well replacing the vpn container did not work still not routing the webservice just timing out.

ok if I do not route Radarr through the deluge VPN container I can get to the web interface, when I change it to route to the container I can not longer get to the interface. The console of radarr has the same IP as the delude vpn so I know its linked. I am going to try rebuilding the delude vpn container.

Anyone having issues with 6.9 ? I updated and I cannot longer get to any webservice running from container to contain vpn including radarr. I do not see any clues in the log.

Thanks I've spent a lot of time trying to figure this out.

Looks like a corrupt data library

Checked my Plex GUI no access so I checked the log it was stuck in a loop so I deleted the docker and ran the setup now I am getting this on startup. [cont-init.d] 10-adduser: exited 0. [cont-init.d] 40-chown-files: executing... [cont-init.d] 40-chown-files: exited 0. [cont-init.d] 45-plex-claim: executing... Temporarily starting Plex Media Server. Waiting for Plex to generate its config Waiting for database creation to complete... Waiting for database creation to complete... Its been running for about 10 minutes this is what is running; USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 200 4 ? Ss 17:15 0:00 s6-svscan -t0 /var/run/s6/services root 33 0.0 0.0 184 8 ? S 17:15 0:00 foreground if /etc/s6/init/init-stage2-redirfd foregro root 34 0.0 0.0 200 4 ? S 17:15 0:00 s6-supervise s6-fdholderd root 45 0.0 0.0 184 8 ? S 17:15 0:00 if /etc/s6/init/init-stage2-redirfd foreground if if root 46 0.0 0.0 184 12 ? S 17:15 0:00 foreground if if s6-echo -n -- [s6-init] mak root 52 0.0 0.0 180 4 ? S 17:15 0:00 if if -t s6-test -d /var/run/s6/etc/cont-init.d root 210 0.0 0.0 180 4 ? S 17:15 0:00 if pipeline s6-ls -0 -- /var/run/s6/etc/cont-init. root 213 0.0 0.0 196 8 ? S 17:15 0:00 forstdin -o 0 -0 -- i importas -u i i if s6-echo -- [con root 214 0.0 0.0 0 0 ? Z 17:15 0:00 [s6-ls] <defunct> root 215 0.0 0.0 0 0 ? Z 17:15 0:00 [s6-sort] <defunct> root 257 0.0 0.0 180 4 ? S 17:15 0:00 foreground /var/run/s6/etc/cont-init.d/45-plex-claim impo root 259 0.0 0.0 6976 3452 ? S 17:15 0:00 bash /var/run/s6/etc/cont-init.d/45-plex-claim root 1978 0.0 0.0 7240 3928 pts/0 Ss 17:30 0:00 bash root 2205 0.0 0.0 5480 532 ? S 17:31 0:00 sleep 1 root 2206 0.0 0.0 8896 3320 pts/0 R+ 17:31 0:00 ps -aux

Great container, I set it all up and it works after changing to a fixed drive path. Only issue is I have V2 EAP225 AP's and they are not supported. Is there a way I could modify the container to the version 3 code stream ie 3.2.1?

Ran the manual update a second time and now its running w/o errors.

I am getting this error; he server was unable to complete your request. If this happens again, please send the technical details below to the server administrator. More details can be found in the server log. Technical details Remote Address: Request ID: JhzmhqeirJKI2Jj5PQpX I found it in the nextcloud log; {"reqId":"JhzmhqeirJKI2Jj5PQpX","level":3,"time":"2020-11-11T17:06:01+00:00","remoteAddr":"x.x.x.x","user":"admin1","app":"index","method":"GET","url":"/settings/user","message":{"Exception":"OCP\\Files\\NotPermittedException","Message":"Could not create path","Code":0,"Trace":[{"file":"/config/www/nextcloud/lib/private/Files/SimpleFS/SimpleFolder.php","line":84,"function":"newFile","class":"OC\\Files\\Node\\Folder","type":"->","args":["47cd-07c5-settings.css"]},{"file":"/config/www/nextcloud/lib/private/Template/SCSSCacher.php","line":312,"function":"newFile","class":"OC\\Files\\SimpleFS\\SimpleFolder","type":"->","args":["47cd-07c5-settings.css"]},{"file":"/config/www/nextcloud/lib/private/Template/SCSSCacher.php","line":182,"function":"cache","class":"OC\\Template\\SCSSCacher","type":"->","args":["/config/www/nextcloud/apps/settings/css","47cd-07c5-settings.css","settings.scss",{"__class__":"OC\\Files\\SimpleFS\\SimpleFolder"},"/apps/settings/css"]},{"file":"/config/www/nextcloud/lib/private/Template/CSSResourceLocator.php","line":110,"function":"process","class":"OC\\Template\\SCSSCacher","type":"->","args":["/config/www/nextcloud/apps/settings","css/settings.scss","settings"]},{"file":"/config/www/nextcloud/lib/private/Template/CSSResourceLocator.php","line":85,"function":"cacheAndAppendScssIfExist","class":"OC\\Template\\CSSResourceLocator","type":"->","args":["/config/www/nextcloud/apps/settings","css/settings.scss","settings"]},{"file":"/config/www/nextcloud/lib/private/Template/ResourceLocator.php","line":78,"function":"doFind","class":"OC\\Template\\CSSResourceLocator","type":"->","args":["css/settings"]},{"file":"/config/www/nextcloud/lib/ I've found that this file {"file":"/config/www/nextcloud/lib/private/TemplateLayout.php" does not exist in the specified place Not sure how this occurred and not sure how to get it back.