ap90033

So what I've been reading is use tail scale it's much easier and works..

Besides dialing up psychics r Us is there an how to or a detailed video on how to get this installed a working correctly? Seems like there's lots of info on how to set this up in Linux or Mac or Windows but if you're an unraid screw you? For us morons who can't figure it out are there any actual I don't know instructions to get this working?

Has this been updated at all we're now near 2026. Looking at the videos online and the website apparently this is a piece of cake except in unraid...

Attached are diagnostics. RTX2080 works fine then disappears until reboot. Any ideas? tower-diagnostics-20260124-1109.zip

Also just curious I have two ZFS pools each are raid Z2 and have eight 14 TB drives each. One v-dev is 74 TB the other is 79. I use the same settings and I'm curious why one is 5 TB bigger?

Not that I know of

Getting btrfs write errors yet when I run scrub of the img and filesystem no errors. Any ideas? I have attached diag file. Thanks!tower-diagnostics-20250824-1830.zip

Thanks I will .. replaced SAS controller but will keep an eye on it 😔

10de:1e82] 0c:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080] (rev a1) PCI Device change Action:Changed VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080] (rev a1)

I have the Linux Nvidia driver installed and it picks it up fine but then it disappears until I reboot

Any suggestions?

I got this one and love it! https://www.amazon.com/Generic-ZhenLoong-LF24-12G-Swappable-Rackmount/dp/B0D4ZJM1GM

My 2080 Nvidia card is not detected. If I reboot it comes back for a while then Unraid cant detect it again. Help? tower-diagnostics-20250824-1830.zip

Thanks a bunch! I'll do that when I can shut the server down. It's probably a bad Drive I bought a half dozen and it's likely one is bad. At least it's under warranty

Thanks This is hooked to a 8643 to 8643 SAS cable. I guess I'll try and run the extended smart?

Getting the following error mpt3sas_cm0: log_info(0x31080000): originator(PL), code(0x08), sub_code(0x0000) I have two LSI HBA Controllers (one 8 Port & one 16 Port). I have attached the diagnostics file for review. tower-diagnostics-20250811-1315.zip

I think what I'm going to do is move everything over to the new server and expand one of the ZFS pools to 12 drives red Z2 14 terabyte each. Then move everything over to that one pool

Thanks guys. I think this helps a little bit. I'm guessing once I get the new server up and running configure the zFS pools and set it up with everything the other server had. Then move the USB drive over

Love how the fact it's been a year and not a single person's replied.

I'm in process of purchasing and building a new server. It will of course have more and larger drives. What I would like to do is build it set it up and then copy over all the data. My question is can I do this and then afterwards movie unread flash drive over. Once I do this will it be pretty much set up or what other steps would I need to do?

Seems like system stats not installing correctly? Is this something I did wrong or known issue? Thanks... plugin: skipping: sysstat-12.7.5.txz - Unraid version too high, requires at most version 6.11.9 ----------------------------------------------------------- Plugin dynamix.system.stats is installed. This plugin requires Dynamix webGui to operate Copyright 2024, Bergware International Version: 2024.01.05 ----------------------------------------------------------- plugin: dynamix.system.stats.plg installed Executing hook script: post_plugin_checks Updating support link Unnraid 7.Beta4

Thanks! Deleted and it freed up. Guess I dont understand what a snapshot is. I thought it was a tiny size "picture" of what I have

I dont get why I moved 16TB of data to zfs pool2 and it shows as used space on zfs pool2, but zfs pool1 still shows as being that same used and free space. When I go to the files and select all then calculate space that shows the used/free space correctly..?

I have a new problem that my dockers (radarr/sonarr/sab) cannot access media and/or data locations now. I created two zfs pools (unraiad 7b4) and moved the movies data to the second pool. Now my dockers cannot access data and the first zfs pool doesn't show any freed up space? Help? I checked the permissions and edited the dockers to reflect the new location. tower-diagnostics-20241027-0934.zip

Well that makes sense! Thanks!!!