ap90033

I think the issue is, I have a Corsair 850 watt gold power supply that was set to multp. rails, I switched to single rail. Trying to run 18 sata drives but it has only 16 connectors. I have purchased https://www.amazon.com/gp/product/B0086OGN9E/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 to add more but am unsure this will work

I got this on https://www.amazon.com/gp/product/B0086OGN9E/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Also my power supply has a switch to set to multiple railes or one. I bet I need to set it to one!

Can I ask a quick question? I have the Corsair HX850 Gold w 16 Sata power connectors. I have 2 more drives and was going to use a Sata multiplier for that can I do that? if not how can I run all the drives?

Sorry for the late reply are there memory errors? Using ecc ram at stock settings. Also didn't start to have issues until I added a few drives and started the parity check

Server just rebooted for no reason. I ran diagnostics with mce installed. See attached. unraid-diagnostics-20200325-1532.zip

Ability to backup (easily) array, apps/plugins/dockers/vms. Snapshot gui (I came from a Synology which had all of this)

Interesting how that wasn't the case with the thread that I did create. But whatever. I'll take your advice and I'll create a thread and who knows maybe on this issue you'll be right. Heck I'm open to giving it a go! Ironic however how I waited for days with no response on the new thread I created as you suggested and here I've already got two! You are absolutely correct on one thing I do need to lower my snark level. Have a good night

Firstly your post not that useful either. Secondly no actual "fix" listed just some let's throw some ideas and see what sticks. No worries though I'll keep researching and will likely figure out the solution just like the vm issue I had and ONE post "asking" did I update the bios which I already did and then NO replies/suggestions whatsoever. Don't worry though I posted what actually worked for me and I hope it helped the community. 👍

Same issue here

That doesn't make much sense then.

I have a VM up and running with Windows 10 on my ryzen and Nvidia system. When I shut down the VM however the screen goes blank and it doesn't go back to the unraid GUI. Anyone here that could help me?

LOL Did you Update the BIOS and thats it?

Geez... For those of us with SEMI MODERN RYZEN SYSTEMS.... I Turned on ACS Override which didnt fix the issue. I then used Tech Power Up, and downloaded a BIOS ROM. Used the Hex editor to fix it then in the VM pointed the GPU BIOS to the file. Seems like Now It BOOTS. Only issue now is when I shut it down it does NOT REVERT To UnRaid GUI...

How did you fix it? How the heck can this be posted last year and no reply with a fix?

0d:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1080] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ZOTAC International (MCO) Ltd. GP104 [GeForce GTX 1080] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f6000000 (32-bit, non-prefetchable) Memory at e0000000 (64-bit, prefetchable) Memory at f0000000 (64-bit, prefetchable) I/O ports at f000 Expansion ROM at 000c0000 [disabled] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [250] Latency Tolerance Reporting Capabilities: [128] Power Budgeting <?> Capabilities: [420] Advanced Error Reporting Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] Secondary PCI Express <?> 0d:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1) Subsystem: ZOTAC International (MCO) Ltd. GP104 High Definition Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at f7080000 (32-bit, non-prefetchable) Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting

Let me know if I need to post anything else

See attached. I did update the BIOS unraid-diagnostics-20200314-1322.zip

Please forgive me, I am a complete noob. Setup VM Win 10 w GPU Passthrough. Have been struggling for days, it now works for a while but blue screens and reboots. here is the vm log when i boot up ErrorWarningSystemArrayLogin -uuid 366a8f72-45d2-1923-cb7e-d1965c534a23 \ -display none \ -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=33,server,nowait \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 \ -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 \ -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x7.0x1 \ -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x7.0x2 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/Windows 10 Gaming/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=libvirt-3-format,id=virtio-disk2,bootindex=1,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Windows.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-cd,bus=ide.0,unit=0,drive=libvirt-2-format,id=ide0-0-0,bootindex=2 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.173-2.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device ide-cd,bus=ide.0,unit=1,drive=libvirt-1-format,id=ide0-0-1 \ -netdev tap,fd=35,id=hostnet0,vhost=on,vhostfd=36 \ -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:c6:12:4d,bus=pci.0,addr=0x2 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=38,server,nowait \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -device vfio-pci,host=0000:0d:00.0,id=hostdev0,bus=pci.0,addr=0x5,romfile=/mnt/user/isos/ZotacGTX180AMP.rom \ -device vfio-pci,host=0000:0d:00.1,id=hostdev1,bus=pci.0,addr=0x6 \ -device usb-host,hostbus=5,hostaddr=3,id=hostdev2,bus=usb.0,port=2 \ -device usb-host,hostbus=5,hostaddr=2,id=hostdev3,bus=usb.0,port=3 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2020-03-14 13:13:13.412+0000: Domain id=1 is tainted: high-privileges 2020-03-14 13:13:13.412+0000: Domain id=1 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0)

excellent this is where it sent me Oops! That page doesn’t exist or is private.

Plex on a pc is accessible remotely and securely. On Unraid it is not. Unraid Plex wants to just work insecure mode. Any ideas why?

So is the issue resolved?