unraid20

Thank you for this. Managed to get it working by following the solution in this thread. Thank you @JorgeB

This is where it's stuck If I press tab to try and go to safe mode I get the following Any thoughts please?

Really appreciate this thank you! I've copied those files in step 1 from /boot/previous to the root of the flash drive in an attempt to rollback to 7.2.3. However, upon starting up I have the same issue where Unraid is stuck at the boot screen! Any other workarounds? Thanks

I've just upgraded to 7.3.0 from 7.2.3 but unfortunately I'm stuck at the Unraid boot screen after "loading /bzroot...ok" In the past I've simply removed the flash drive and plugged it into a windows laptop and have the run the repair which then gets unraid back up and running. However, that doesn't seem to working this time. I've also re-extracted the Unraid release bz* files from the original zip file but again no luck. I've also tried a different USB 2.0 port but no luck either. Any help would be kindly appreciated.

I've resolved this now with a recent backup. Much appreciated thank you. Also on one of my 3.5" HDD array disks I have the error below even though the Last SMART test result: Completed without error Anything I ought to do regarding this? 199 UDMA CRC error count 0x0032 200 200 000 Old age Always Never 8

There still appears to be appdata on the failed cache drive. Safer to copy to the new SSD from a backup in this case?

Thank you. If I replace it with the new 1TB SSD drive, format in ZFS and then reverse mover from cache to array on the shares will all my data be in tact?

Hi, hope everyone is keeping well. I'm in the process of converting my single 970_EVO_1TB XFS cache drive to ZFS and then adding another 1TB as RAID 1 mirror. I've followed spaceinvader's tutorial (https://www.youtube.com/watch?v=vXF8au5o9Tw) where cache is backed up to the array using mover. However, halfway through the process mover just stopped and there's still data on the cache. When restarting mover nothing happens! Entries in the syslog Tower move: mover: started Tower kernel: nvme2n1: I/O Cmd(0x2) @ LBA 1533967328, 256 blocks, I/O Error (sct 0x2 / sc 0x81) MORE Tower kernel: critical medium error, dev nvme2n1, sector 1533967328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Tower kernel: nvme2n1: I/O Cmd(0x2) @ LBA 1533967328, 256 blocks, I/O Error (sct 0x2 / sc 0x81) MORE DNR Tower kernel: critical medium error, dev nvme2n1, sector 1533967328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Tower kernel: nvme2n1: I/O Cmd(0x2) @ LBA 1533967328, 256 blocks, I/O Error (sct 0x2 / sc 0x81) MORE DNR Tower kernel: critical medium error, dev nvme2n1, sector 1533967328 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 SMART === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 32 Celsius Available Spare: 98% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 69,926,739 [35.8 TB] Data Units Written: 63,703,789 [32.6 TB] Host Read Commands: 598,075,028 Host Write Commands: 1,593,565,091 Controller Busy Time: 20,038 Power Cycles: 80 Power On Hours: 8,004 Unsafe Shutdowns: 41 Media and Data Integrity Errors: 686 Error Information Log Entries: 766 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 32 Celsius Temperature Sensor 2: 40 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 766 0 0xd006 0x4004 - 0 0 - Invalid Field in Command Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code 0 Short Completed: failed segments 7997 19867936 1 7 - - 1 Extended Completed: failed segments 7997 20803392 1 7 - - 2 Short Completed: failed segments 7997 19867936 1 7 - - Any way to rectify this issue or has the SSD completely failed?

I'm not able to reboot from webGUI as it says "File not found" Terminal says "502 Bad Gateway" and can't SSH into the server either even though I can still access the main page of the GUI. Any other way to reboot apart from using the power button?

Hey hope everyone is keeping well. I accidentally pulled out my usb boot flash drive and I've now got the error message that my key file is missing. I've tried the recover key option from my unraid account but the page redirects to "500 Internal Server Error". I've also tried downloading the key file and putting it in the /config folder on the usb drive but the error message still persists. When I try to reboot it says "File not found" presumably because of the issue with usb drive. Would really appreciate any help here!!

Were you able to resolve this? I've got a similar error with mariadb Debug log: 154b13a5-05b8-440f-a349-7a86ef175b70 If dev or anyone else can help too would be greatly appreciated!

I'm getting the same error message, however, that pathway does not exist in krusader and I cannot see that file. How do you locate it? Thanks

Have the ducts lowered your HDD temps? And would you mind telling me which online service you used to buy them please?

I just came across advice on the Plex forums which suggests installing the latest Plex beta (arm64v8a). And I can gladly say the issue has been resolved for me Here's a link https://forums.plex.tv/t/release-announcements-android-tv-beta/154124/517

Thank you but unfortunately this hasn't solved the problem for me. Any other ideas?

I'm having exactly the same issue after the recent update. Other audio formats than TrueHD are working. Have you had luck in solving this?

Sorry what I should have said is the plex container traffic is routed through a VPN. So before the update, the console curl ifconfig.io IP address was the same as the IP address shown in settings>remote access. Now remote access is showing the IP address of the unraid server instead of the VPN. Does that make sense? Thanks

Hi everyone, I would appreciate some advice please. After a recent update to plex version 1.22.1.4228 I've now noticed that in the remote access settings, plex is using the public IP of my unraid server instead of the public IP of the docker container itself. Is there any way to force plex back to using the public IP of the docker container? I have verified the container's public IP by using curl ifconfig.io Thank you!

Received my case today which confirms 1x Molex and 3x SATA power! Silverstone's QC clearly not concerned about internal aesthetics with this case....capacitors are at all kinds of angles!

In my boredom still waiting for case I came across this section in video https://www.youtube.com/watch?v=8B340ZkHU4Y&feature=youtu.be&t=14m19s It shows 1x Molex and 3x SATA power!

Ah that's interesting certainly changes perspective on the cabling, thank you. (Btw, this is a DS380 thread so not totally unrelated after all!) I'm awaiting delivery of the case now so will update once I know. I've ordered a fan splitter but still need to order HBA breakout cables, etc. Is this cable similar to the DeLock? https://www.silverstonetek.com/product.php?pid=383&area=en

No the extra fan is not possible on this one. Those temps are good but I'm wondering how much of that owes to the larger case. All this modding has got me thinking whether I can sacrifice the hotswapping and just go for the Node 804 instead!

Have you replaced the rear exhaust or is it still stock? And what are your temps like? Btw, that thread looks useful thank you!

Hi everyone, just bringing up an old thread as I'm set on the DS380 due to the hot-swappable bay. I understand the carboard mod makes a difference to temps but I'm looking to order Noctua fans alongside the case. I will be using an LSI card so would appreciate advice on shorter SATA cables? And would I be right in saying three NF-A12x25 are the ones to go for now? And should these be run off the motherboard (Asus RS X470i) with a fan splitter instead of the hard drive back plate?