cambriancatalyst

Members
  • Posts

    36
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

cambriancatalyst's Achievements

Newbie

Newbie (1/14)

3

Reputation

  1. It seems I spoke too soon. The system was doing great after setting power supply idle control to typical current idle the rig but after a couple of hours the system entered the same type of sleep pattern. I had setup syslog so I was able to capture the system entering an s3 sleep state. Please see below for logs. Does anyone know how I can prevent this from occurring?
  2. Thank you trurl! I applied the changes mentioned in the linked thread and have had no crashes since then. I appreciate your help!
  3. Just to follow-up. I reverted back to 6.9.0beta35 and the system has been stable with no crashes. I'd really appreciate any feedback regarding the above diagnostic report. I initially thought this was a hardware issue on my end due to the message but given that it seems to be stable on 6.9.0beta35 I'm starting to think otherwise. Any help is appreciated. Thanks.
  4. Hello all, my server has been crashing pretty consistently (every 10-15 minutes or so after reboot) a couple hours after upgrading from 6.9.0-beta35 to 6.9. I am receiving the following error in Fix Common Problems: "Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged" I have attached my diagnostics. Can anyone provide assistance? Thank you! tower-diagnostics-20210303-0330.zip
  5. Thank you, Jorge! I’ll be sure to upgrade from beta35. I’ve been putting off RC1 for too long.
  6. Thanks so much for this. I got greedy and attempted to run the Software Update to go from 1.4 to 1.5.3 and now I'm receiving an internal server error even after completely wiping the container/image and reinstalling. Any idea why this may be happening? I've provided the log output and a screenshot of the error message below. Any help is greatly appreciated and thank you again for creating this!
  7. Hey all, I'm about to run the following command on my rig to try and fix the excess ssd write issue: mount -o remount -o space_cache=v2 /mnt/cache I'm just wondering if I'll need to stop my VMs and/or docker services before running it? Any input is greatly appreciated. Thanks a bunch!
  8. Hi everyone, I've just finally gotten my 3070 able to launch in a Windows 10 VM. Unfortunately I can't alter the resolution. I have updated the virtio drivers to the latest (virtio-win-0.1.189-1.iso) and also pointed my Display adapter to both the qxl and qxldod folders on the Virtio ISO disk with no success. I've also tried running the virtio-win-gt-x64.msi from the same disk with no success. One other curious thing I noticed is that my HDMI dummy plug (which I used to be able to remotely control my machine through parsec with my old card) isn't being detected either as a second display. My previous setup was using the dummy plug with a DVI adapter (since it only had one hdmi input and one DVI input) but this new card I have both plugged in through hdmi (this one comes with 3 hdmi and 3 DP). Any ideas for troubleshooting is appreciated. Thanks very much. Please see diagnostic attached and VM template below: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10</name> <uuid>Not Sure if I need to hide this but why not</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>17301504</memory> <currentMemory unit='KiB'>17301504</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>14</vcpu> <cputune> <vcpupin vcpu='0' cpuset='1'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='10'/> <vcpupin vcpu='4' cpuset='3'/> <vcpupin vcpu='5' cpuset='11'/> <vcpupin vcpu='6' cpuset='4'/> <vcpupin vcpu='7' cpuset='12'/> <vcpupin vcpu='8' cpuset='5'/> <vcpupin vcpu='9' cpuset='13'/> <vcpupin vcpu='10' cpuset='6'/> <vcpupin vcpu='11' cpuset='14'/> <vcpupin vcpu='12' cpuset='7'/> <vcpupin vcpu='13' cpuset='15'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-5.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/f24795a8-8c2e-c966-a56a-f47b960527df_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='7' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win10_1909_English_x64.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.189-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:ef:2b:1e'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </source> <rom file='/mnt/user/domains/Gigabyte.RTX3070.rom'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x07' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0c' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> </domain> tower-diagnostics-20201202-1533.zip
  9. JORGE, MY MAN! You are truly my hero. Starting in safe mode was no dice, but renaming vfio-pci.cfg to vfio-pci-old.cfg did the trick! Sorry for the double post, thought I properly deleted the others. Now I can get back to failing to get this new GPU to work! Thank you SO much! Is there anywhere I can donate to the organization? Since y'all have been so incredibly helpful in troubleshooting a ton of issues and patient with me, I'd like to show my thanks
  10. Hey all, I was previously using the vfio-pcie plugin to passthrough a MSI GTX 960 to a windows VM. All was good until I decided to upgrade my GPU. The installation went smooth but the VM wouldn't start properly. I tried upgrading from beta25 to 35 but still had issues starting the VM. At this point I attempted to start from scratch with my bindings and disabled ACS override and restarted my machine. Now I can't access the GUI remotely nor can I use my keyboard after getting through the headless vs gui option (keyboard works fine to select a launch mode but nothing after that). I've tried logging in with safe mode but still can't use my keyboard to login. I'm not able to generate a diagnostic since I can't get to the GUI. Do I have any other options at this point besides starting from scratch? =/ Any help is really appreciated. I can provide more details if needed. Thanks so much
  11. Hi all, I upgraded to 6.9beta35 and am unable to access the unraid GUI remotely. I have a display plugged in to my pc and can see my tower login screen but cannot type anything in with any of my usb inputs. I had vfio bindings that I think may be playing a roll. I switched acs override from “both” to “disabled” prior to rebooting and encountering this issue. can anyone guide me in generating an error report to post for review? I feel like I may have really screwed myself here as I’m not sure how I would do anything without peripheral devices, any help is appreciated. thanks very much
  12. For some reason my system share got switched to not exporting and using the array rather than the cache. After switching these settings back to normal and restarting all is well. Sorry for cluttering! Please feel free to delete.
  13. Hi all, sorry for all the recent posts. I just installed a new GPU on my machine and, after rebooting, am greeted with no docker containers or VMs. I've included diagnostics below. Would anyone be able to help out with troubleshooting? I appreciate any and all help. Thank you! tower-diagnostics-20201201-1714.zip
  14. Hi everyone, I'm upgrading from a MSI 960 2GB to a Gigabyte 3070 Aorus Master (used for passthrough to Windows VM). I just had 3 questions before beginning: 1) I used this video SpaceInvader passthrough w/o dumping BIOS when installing the 960 bios and didn't face any issues. I'm taking a preliminary look at the bios for the 3070 and not seeing the header section discussed in the video. The 960 bios was pretty easy to identify, does anyone know if this step is necessary for these new cards? 2) I'd like to know if there is anything I should do prior to shutting down my server and replacing the card? 3) I'd like to know if there is anything I need to do after restarting other than re-configuring the passthrough with vfio, re-configuring my VM to use the new card, enabling multifunction, and restarting VM? Thanks so much to anyone with the time to discuss the proper course of action here. I appreciate you all very much!