mic.88

I'm using a FANTEC SRC-4240X07, it has a 24 port sas/sata backplane. I really doubt this is a "cable" issue. At first I had the issue with disk 3+4 and now I'm reproducing it with disk11 because there is no data on it. I don't know why disk12 disconnected

The EPC and lowCurrentSpinup setting did not solve the issue I noticed this the last time too but did not tell you here. When the disks goes into error-mode, the web-gui becomes kind of read-only. The Stop-Array buttons does not work and no settings can be changed anymore. The containers and VMs are still up an I can access shares. I have to push the power-button to shutdown and restart the array Very strange alpha-unraid-diagnostics-20231118-1739.zip

Thanks i'll try this as soon as the parity rebuild is done. I have two IronWolf disks in the array who don't have the issue. When this issue first came up, the disks failing where WesternDigital-disks I replaced the WD-disks with new Exos X18 I'll update the post as soon as its done and tested

The spin-down seems to be the issue here. The array run for 2 weeks now with spin-down set to never. I started yesterday with setting individual disks to spin-down after 15mins. Almost all of my disks work with this. Only my Exos X18 (Disk11 /dev/sdk) disks don't. Nov 16 10:19:32 Alpha-Unraid kernel: mdcmd (74): set md_num_stripes 1280 Nov 16 10:19:32 Alpha-Unraid kernel: mdcmd (75): set md_queue_limit 80 Nov 16 10:19:32 Alpha-Unraid kernel: mdcmd (76): set md_sync_limit 5 Nov 16 10:19:32 Alpha-Unraid kernel: mdcmd (77): set md_write_method Nov 16 10:19:32 Alpha-Unraid emhttpd: spinning down /dev/sdk Nov 16 10:20:01 Alpha-Unraid flash_backup: adding task: /usr/local/emhttp/plugins/dynamix.my.servers/scripts/UpdateFlashBackup update Nov 16 10:20:47 Alpha-Unraid kernel: sd 11:0:5:0: attempting task abort!scmd(0x000000000658e7e8), outstanding for 7050 ms & timeout 7000 ms Nov 16 10:20:47 Alpha-Unraid kernel: sd 11:0:5:0: [sdk] tag#6626 CDB: opcode=0x85 85 06 20 00 d8 00 00 00 00 00 4f 00 c2 00 b0 00 Nov 16 10:20:47 Alpha-Unraid kernel: scsi target11:0:5: handle(0x000e), sas_address(0x5001517e3b0bf0aa), phy(10) Nov 16 10:20:47 Alpha-Unraid kernel: scsi target11:0:5: enclosure logical id(0x5001e677b6dbbfff), slot(10) Nov 16 10:20:47 Alpha-Unraid kernel: sd 11:0:5:0: device_block, handle(0x000e) Nov 16 10:20:49 Alpha-Unraid kernel: sd 11:0:5:0: device_unblock and setting to running, handle(0x000e) Nov 16 10:20:50 Alpha-Unraid kernel: sd 11:0:5:0: task abort: SUCCESS scmd(0x000000000658e7e8) Nov 16 10:20:50 Alpha-Unraid kernel: sd 11:0:5:0: [sdk] Synchronizing SCSI cache Nov 16 10:20:50 Alpha-Unraid kernel: sd 11:0:5:0: [sdk] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK Nov 16 10:20:50 Alpha-Unraid kernel: mpt2sas_cm0: mpt3sas_transport_port_remove: removed: sas_addr(0x5001517e3b0bf0aa) Nov 16 10:20:50 Alpha-Unraid kernel: mpt2sas_cm0: removing handle(0x000e), sas_addr(0x5001517e3b0bf0aa) Nov 16 10:20:50 Alpha-Unraid kernel: mpt2sas_cm0: enclosure logical id(0x5001e677b6dbbfff), slot(10) Nov 16 10:20:50 Alpha-Unraid emhttpd: read SMART /dev/sdk Nov 16 10:20:50 Alpha-Unraid kernel: mpt2sas_cm0: handle(0xe) sas_address(0x5001517e3b0bf0aa) port_type(0x1) Nov 16 10:20:51 Alpha-Unraid kernel: scsi 11:0:15:0: Direct-Access ATA ST16000NM000J-2T SC02 PQ: 0 ANSI: 6 Nov 16 10:20:51 Alpha-Unraid kernel: scsi 11:0:15:0: SATA: handle(0x000e), sas_addr(0x5001517e3b0bf0aa), phy(10), device_name(0x0000000000000000) Nov 16 10:20:51 Alpha-Unraid kernel: scsi 11:0:15:0: enclosure logical id (0x5001e677b6dbbfff), slot(10) Nov 16 10:20:51 Alpha-Unraid kernel: scsi 11:0:15:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Nov 16 10:20:51 Alpha-Unraid kernel: scsi 11:0:15:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: Attached scsi generic sg10 type 0 Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: Power-on or device reset occurred Nov 16 10:20:51 Alpha-Unraid kernel: end_device-11:0:11: add: handle(0x000e), sas_addr(0x5001517e3b0bf0aa) Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] 4096-byte physical blocks Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] Write Protect is off Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] Mode Sense: 7f 00 10 08 Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] Write cache: enabled, read cache: enabled, supports DPO and FUA Nov 16 10:20:51 Alpha-Unraid kernel: sdt: sdt1 Nov 16 10:20:51 Alpha-Unraid kernel: sd 11:0:15:0: [sdt] Attached SCSI disk Nov 16 10:20:52 Alpha-Unraid unassigned.devices: Disk with ID 'ST16000NM000J-2TW103_ZR5AGC4V ()' is not set to auto mount. Nov 16 10:20:53 Alpha-Unraid emhttpd: error: hotplug_devices, 1706: No such file or directory (2): tagged device ST16000NM000J-2TW103_ZR5AGC4V was (sdk) is now (sdt) Nov 16 10:20:53 Alpha-Unraid emhttpd: read SMART /dev/sdt Nov 16 10:20:53 Alpha-Unraid kernel: emhttpd[10420]: segfault at 67c ip 000056528418775f sp 00007ffd34b8b620 error 4 in emhttpd[565284172000+24000] likely on CPU 8 (core 10, socket 0) Nov 16 10:20:53 Alpha-Unraid kernel: Code: c4 36 01 00 48 89 45 f8 48 8d 05 f9 23 01 00 48 89 45 f0 e9 79 01 00 00 8b 45 ec 89 c7 e8 1a 88 ff ff 48 89 45 d8 48 8b 45 d8 <8b> 80 7c 06 00 00 85 c0 0f 94 c0 0f b6 c0 89 45 d4 48 8b 45 e0 48 Nov 16 10:21:01 Alpha-Unraid flash_backup: adding task: /usr/local/emhttp/plugins/dynamix.my.servers/scripts/UpdateFlashBackup update

Had the same issue but not the option to input a key (array was stopped) After a reboot I was able to add the key and the format was succesfull

I really like the spin down functionality to reduce power consumption...

Should I disable Spin-Down alltogether or just increase the timining? I'm using a FANTEC SRC-4240X07 with SAS/SATA backplane. It should affect all disks and not 1-2 right?

Anyone?

Hi UNRAID Community, I have an issue with different drives failing but the SMART health reports don't show any errors. Attached you find the diag report just after the disk3 failed @ around 19:00 and got disabled The disk3 and 4 failed several days ago too, but the SMART values are look good in my optinion. I did some tesing on my workbench PC and the disk3 did not show any signs of failures/errors. Might be an controller/cable issue (LSI SAS2308, FWVersion(20.00.07.00), ChipRevision(0x05), BiosVersion(07.39.02.00)) but the systems runs for more than 3 years now without major issues I replaced the disk3 now with a new (tested) one. But I don't think this is the root cause here Please help me analyse the diag-logs alpha-unraid-diagnostics-20231029-1938.zip

Hi UNRAID community, as the titel already discribes the issue, I run 2 docker containers (lancache+dns) inside an ubuntu 20.04.6 LTS vm. The vm is configured to only have 2 cores and 2 ht. But as soon as the conatiners start to use CPU resources, while steam-downloads for example, the whole physical CPU in the systems goes to almost 100% and ignores the cpu pinning of the vm. If I start a CPU stress-test on the VM with s-tui, only the 2+2 cpus are used. The vm has 4 disks (3 passthrough in lvm) but reading or writing to either of them, does not increase the CPU usage My system runs Unraid 6.12.4 on a AMD Ryzen 7 3700X Is this a KVM bug or something? I know I cloud run the containers in UNRAID directly but I prefere the passthrough disks instead of array disks for the lancache

I updated one of my two 980 Pro mirrored-cache drives. The other one already was on the latest version. The update only applied or showed up in the unraid gui after a reboot Thanks for the upgrade procedure!

Having the same issue here. Backup is stuck on "Verifying" since i did update to UNRAID 6.9.2. Had to start my containers manually, backup is still stuck...