faramir85

Members
  • Posts

    11
  • Joined

  • Last visited

Everything posted by faramir85

  1. Yes, i installed the 387.10.10.10.40.139 version. I used a github utility that selects the best version for the macos (High Sierra 17G14033). I updated the system through Appstore and got to the 17G14033 version, not the xxx042. Regarding the boot_args, i remembered following a guide that specified the nvda_drv=1, but don't recall the _vrl suffix. I'll look into this and try again. Thx.
  2. Hello! I managed to install HighSierra thanks to the new Macinabox docker version released recently. I also configured it to passthrough my 1050TI GPU and got the sound to work properly. I configured everything using VNC at the beginning and after that thanks to nomachine&/chrome remote desktop. No problems when i connect to the VM through remote control software. The thing is that i lose signal after the apple logo at boot, the samsung tv which is connected through HDMI cable to the GPU loses signal and i get a black screen, although the VM is fully working if i login with nomachine or chrome remote desktop. Any hints? Thanks!
  3. Sorry for the delay, i went on vacation and couldn't reach the server. After restarting it and repairing the cache drive, i keep getting random hard locks on the server when i boot the W10 VM. I've been reading about these kind of problems and i believe it's caused by the fact that i'm trying to passthrough the GPU to the W10 VM and the video card is also used under Plex docker (for trascoding, although in that specific moment there's no active transcoding). The specs of the server, in case it helps: unraidOS 6.8.3 Xeon E3 - 1265V2 nvidia 1050TI I remember installing the nvidia drivers and using a script (via command line) in order to apply a patch to unlock the limit on the transcoding streams. I believe i could solve these estability problems if i only use the gpu inside the W10 VM and stop using it through the Plex docker (i could use hw transcoding thanks to the Xeon - IGPU). How could i config the system so the Plex docker stops using the GPU? Upgrading to the latest unraidOS version would help? Any help would be appreciated , regards.
  4. After restarting the server, i restored the VM xml that i backed up (in case i messed up any config) and the W10 OS booted up correctly. I shutdowned the machine and a few hours later, when i tried to start it again, the same problem arises (red arrows spinning and the VM won't start). These are the logs messages that i've found in the system:
  5. Hello, I've been using a W10 VM that i recently installed and it was working apparently very smoothly (it has a 1050TI pass-through). Yesterday I powered off the VM and this morning when i tried to boot it on again, the VM in unraid GUI won't start - red arrows in circle and no "started" message. The VM tab froze and the machine got unresponsive. Tried to shut the server down from the unraid GUI but it won't shutdown until i pressed the poweroff button on the server and forced it. Attached you can find the diagnostic zip. Anyone knows the reason for this error i found on libvirt.log? tower-diagnostics-20211226-1102.zip
  6. Hi everyone. I'm trying to install a macOS VM + 1050TI gpu-passthrough. I've installed macinabox but every attempt to install Catalina, BigSur, High Sierra using both methods 1 or 2, it results in the installation of the new Monterey version. After reading the forum, I came to the conclusion that I can only do gpu-passthrough in High Sierra (Nvidia 1050TI is not compatible with newer versions). Is it possible to install to install High Sierra using macinabox? How? I failed in every attempt... Thanks!
  7. Ok, once i've disabled all dockers i have rebooted and all is working fine. Now i have to find which docker is causing the problem. Thanks.
  8. No clue at all 😮 Does this come from inside a docker? Maybe sonarr/radarr? In this case, should i trie to uninstall it?
  9. Hello there, I've been running Unraid OS rock solid for the last months but yesterday, i noticed the Plex server wasn't working and decided to hard-shutdown the server. Once it was up and running again, i tried to connect via Chrome to the GUI (locally) and all I got was a "connection refused" message. I powered-off again and booted in safe mode, noticing i regained web access to the Unraid GUI. After surfing the Unraid forum, i understood the problem could be caused by the misfuncion of any plugins, so i moved all the installed plugins from the USB stick to a "backup folder" and tried to boot again in standard mode, but there was no luck, no GUI access. I've also tried to "chkdsk" the USB stick and no problems were found. Attached you can find the Unraid diagnostics in case this can be helpful. Thanks in advance. tower-diagnostics-20201117-1712.zip
  10. Hello, that was the first thing i tried, since the "load server" option automatically found the IP server address. However, for some reason the Ombi docker cannot find that IP address. Do i need to setup both Ombi and Plex media server docker's network in some specific way so they have visibility of each other?
  11. Hello, I've installed the linuxserver/ombi docker and i'm having a hard time with the Plex auth process. No matter what i try, i cannot reach the Plex server and load the libraries. Below you can see the dockers network config: Inside Ombi config page I entered Plex login credentials, select the server and I overwrite the hostname with my Plex reverse proxy docker. I also tried to insert the Plex auth token from the XML view from a Plex file in the server: Any suggestions would be appreciated. Thanks in advance. Ombi's docker log: Could not test Plex System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.IO.IOException: The server returned an invalid or unrecognized response. at System.Net.Http.HttpConnection.FillAsync() at System.Net.Http.HttpConnection.ReadNextResponseHeaderLineAsync(Boolean foldedHeadersAllowed) at System.Net.Http.HttpConnection.SendAsyncCore(HttpRequestMessage request, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.HttpConnection.SendAsyncCore(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithNtConnectionAuthAsync(HttpConnection connection, HttpRequestMessage request, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithRetryAsync(HttpRequestMessage request, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.RedirectHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.HttpClient.FinishSendAsyncBuffered(Task`1 sendTask, HttpRequestMessage request, CancellationTokenSource cts, Boolean disposeCts) at Ombi.Api.OmbiHttpClient.SendAsync(HttpRequestMessage request) in C:\projects\requestplex\src\Ombi.Api\OmbiHttpClient.cs:line 61 at Ombi.Api.Api.Request[T](Request request) in C:\projects\requestplex\src\Ombi.Api\Api.cs:line 38 at Ombi.Api.Plex.PlexApi.GetStatus(String authToken, String uri) in C:\projects\requestplex\src\Ombi.Api.Plex\PlexApi.cs:line 97 at Ombi.Controllers.External.TesterController.Plex(PlexServers settings) in C:\projects\requestplex\src\Ombi\Controllers\External\TesterController.cs:line 272 [40m[32minfo[39m[22m[49m: Ombi.Schedule.Jobs.Plex.PlexContentSync[0] Starting Plex Content Cacher Recently Added Scan [40m[32minfo[39m[22m[49m: Ombi.Schedule.Jobs.Plex.PlexContentSync[0] Starting to cache the content on server ubuntujd [40m[1m[33mwarn[39m[22m[49m: Ombi.Schedule.Jobs.Plex.PlexContentSync[2008] Exception thrown when attempting to cache the Plex Content in server ubuntujd System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.IO.IOException: The server returned an invalid or unrecognized response. at System.Net.Http.HttpConnection.FillAsync() at System.Net.Http.HttpConnection.ReadNextResponseHeaderLineAsync(Boolean foldedHeadersAllowed) at System.Net.Http.HttpConnection.SendAsyncCore(HttpRequestMessage request, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.HttpConnection.SendAsyncCore(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithNtConnectionAuthAsync(HttpConnection connection, HttpRequestMessage request, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithRetryAsync(HttpRequestMessage request, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.RedirectHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.HttpClient.FinishSendAsyncBuffered(Task`1 sendTask, HttpRequestMessage request, CancellationTokenSource cts, Boolean disposeCts) at Ombi.Api.OmbiHttpClient.SendAsync(HttpRequestMessage request) in C:\projects\requestplex\src\Ombi.Api\OmbiHttpClient.cs:line 61 at Ombi.Api.Api.Request[T](Request request) in C:\projects\requestplex\src\Ombi.Api\Api.cs:line 38 at Ombi.Api.Plex.PlexApi.GetLibrarySections(String authToken, String plexFullHost) in C:\projects\requestplex\src\Ombi.Api.Plex\PlexApi.cs:line 120 at Ombi.Schedule.Jobs.Plex.PlexContentSync.GetAllContent(PlexServers plexSettings, Boolean recentlyAddedSearch) in C:\projects\requestplex\src\Ombi.Schedule\Jobs\Plex\PlexContentSync.cs:line 577 at Ombi.Schedule.Jobs.Plex.PlexContentSync.ProcessServer(PlexServers servers, Boolean recentlyAddedSearch) in C:\projects\requestplex\src\Ombi.Schedule\Jobs\Plex\PlexContentSync.cs:line 152 at Ombi.Schedule.Jobs.Plex.PlexContentSync.StartTheCache(PlexSettings plexSettings, Boolean recentlyAddedSearch) in C:\projects\requestplex\src\Ombi.Schedule\Jobs\Plex\PlexContentSync.cs:line 130 [40m[32minfo[39m[22m[49m: Ombi.Schedule.Jobs.Plex.PlexContentSync[0] Finished Plex Content Cacher, with processed content: 0, episodes: 0. Recently Added Scan: True