Erich
Members-
Posts
92 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by Erich
-
Good to know. Thanks.
-
Ok, got it. I think the data that was there (movie files) was moved eventually. I just didn't expect those shares (appdata, domains, system) to require that much space. Thank you. I really appreciate the help.
-
-
-
Ok, I disabled it, hit apply and then enabled it again. Is it on now? phoenix-diagnostics-20221003-1127.zip
-
-
Ok, thanks. Here is the diagnostics. phoenix-diagnostics-20221003-1043.zip
-
(Solved) mATX MB recommendation for new unRaid server
Erich replied to Erich's topic in Motherboards and CPUs
I found an mATX board that so far has been working well for my needs. I am using an ASRock X570M Pro4 MB. It has 8 SATA Ports which is all that I will need. I would recommend this board for those who might be looking for an mATX board for AM4 CPUs.- 1 reply
-
- 1
-
It seems when I invoke the mover to move data from the cache to the array, nothing actually happens. If I have 25GB on the cache and invoke the mover, there is no read/writes to the array and the 25 GB does not change. Is this something I should be concerned about?
-
Seems to be working now. All I did was change the system clock in the computer BIOS as it was not reading the correct date and time. Not sure why that fixed it though.
-
No response. Is this the correct place to post this issue?
-
I can no longer access the internet from unraid. I have no idea what happened. When accessing the Apps page, i get... "Download of appfeed failed. Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again. Alternatively, there is also a chance that the server handling the application feed is temporarily down. See also this post for more information Last JSON error Recorded: Syntax error" I tried the suggestions about adding new static dns addresses, but that didn't help. I have attached the diagnostics file. Would appreciate any help. Thanks. phoenix-diagnostics-20220929-1551.zip
-
[6.11.0] SMB passwords do not work anymore after upgrade from 6.10
Erich commented on MAM59's report in Stable Releases
I followed the instructions about changing the security policy to "NTLMv2 response only/refuse LM and NTLM" and upgraded Unraid to 6.11. I am now able to access the Unraid server from my Windows machine. So it seems to have resolved this issue for me. -
[6.11.0] SMB passwords do not work anymore after upgrade from 6.10
Erich commented on MAM59's report in Stable Releases
I also have this problem. Network credentials no longer accepted after upgrading to 6.11. Once I reverted back to 6.10, everything works again. Is there a fix for this? -
Can anyone recommend some good micro-ATX motherboards? I think I am leaning towards AMD as there seem to be more options for ECC RAM. I saw on these forums that B550's aren't recommended, but I cannot find many x570 mATX boards. Any recommendations would be appreciated. I haven't purchased the CPU yet, so I am still open to Intel if that's the best option. But I would like to get a CPU+MB combo that supports ECC RAM. I am currently considering the ASUS TUF GAMING B550M-PLUS, or the Asrock B550M PHANTOM GAMING 4. Both of these have 2 PCIe 4 x16 slots, but I think if one slot is used the other is only running at x4. I am wondering if I can still use an HBA card (LSI 9207) in one of those slots (a video card will be in the 1st x16). from what I understand the LSI needs a x8 slot, which I think neither of these boards have. So if that is a issue, what other mATX boards would you recommend?
-
Perfect. Thanks.
-
Ok, Thank you for your help. I am really new to unRAID and Linux. In fact, I have never used either before, so this is all quite a learning curve. I really don't know what it means or how to "pass through the Device to the container". I just know that this enables the application to use the hardware for transcoding. Just not sure exactly what steps I need to do.
-
Yes, I was thinking instead of buying another GPU, I could just use my Intel i5-9400. It would save me from having to purchase another card. Not sure which one would be easier to set up though - installing a new GPU and the Nvidia driver, or using the iGPU and pass through the device. Thanks for clarifying that I wont need to use the Nvidia driver if I go the iGPU route..
-
Another option I have is to use an Intel i5-9400 9th Gen cpu which has integrated video. I have one of these and a compatible MB which is currently not in use. Would this work with the Nvidia driver and unRAID?
-
Hi. I was going to use the card for transcoding video. Thanks for the info. I will see about getting a newer card.
-
Recently I installed the Nvidia-driver plugin. However, I only discovered after it was installed that it did not install the driver I needed for my older graphics card. So the Nvidia-driver plugin failed. I have a Quadro 2000, but the drivers the Nvidia-Driver plugin installs are for "newer" cards. None of the drivers it installs will work with my card. How do I uninstall the incorrect driver and reinstall the correct driver (I need 390.154)?
-
I am getting the error: "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running." I need to be able to install driver 377.83 for my Quadro 2000. How do I install this driver?
-
I think I discovered the problem and solution. I was using Robocopy on Windows 10 to copy my files over to the unRAID server. However Robocopy is known to cause the destination folder to become hidden as a result of it changing the folders attributes. Here is some info about this issue: https://www.mickputley.net/2013/10/robocopy-creates-folder-that-is-hidden.html Hope this helps someone else in the future.
-
Thanks. Changing the name didn't seem to help.
-
Just tried accessing the share from another Windows 10 Pro computer. It doesn't see the Tutorials folder either. It shows everything the other machine showed though. So I am thinking something must have happened to the Tutorials share.