SMCSUser

Has anyone gotten this to work? All I get is 502 Bad Gateway error

Has anyone gotten this to work? I have set it up over and over and I only get 502 Bad Gateway. Any help advice would be very appreciated.

The update over night fixed it. Thank you for that.

Has anyone else had any issues with this after the update? Now my PW Pusher page will not load, just gives 502 error. All was working great until I updated it today. Any help would be appreciated!

You are very welcome, glad it worked out for you! Totally agree on the community, without it we would waste endless hours on the easiest tasks, but not knowing about those tasks is what makes it harder lol

Correct, go to Apps tab type Wordpress and set it up from there. You do not need Nginx separately.

Hi Vic, I have several instances of Wordpress running on my server and I did not have to do anything like you are talking about. Are you using the Wordpress template? If not, I highly recommend it, you don't have to change much to get it working. Once you do, all you have to do is log into your dashboard and go to Settings - Permalinks and set it however you want from there. Hope this helps! If you need anything further please feel free to ask.

Found the solution. Thank you

Can anyone tell me how to install graphviz on my Nginix docker? I am not familiar on how to install packages in unraid or if it is even possible. Any help would be very appreciated.

I have multiple Websites Running on Nginx Docker and Nginx Reverse Proxy Docker on Unraid 6.9.2. All works absolutely perfect from any Computer or Phone. The issue is only with iPhone that I am aware of. If my iPhone is on wifi I can connect no problem, but if I turn off wifi and go to cellular data, the phone will not connect to any of my websites. Every browser I have tried gives similar messages like this: Website ERR_SSL_PROTOCOL_ERROR I have been troubleshooting this for over 3 weeks now and have tried every trick I could find, but nothing works. it has me puzzled that it will work fine for computers inside and outside of the network and phones inside and outside of the network, but will not work when switched to cellular data. If anyone could help me get this working I would really appreciate it. If I need to provide more information I can try an do that as well. Also, when I run tests with SSL Labs, I get A+ rating so I am just at a loss.

Ok, thank you so much!

But there is nothing wrong with the dockers themselves, would i still use that support link?

I have multiple Websites Running on Nginx Docker and Nginx Reverse Proxy Docker on Unraid 6.9.2. All works absolutely perfect from any Computer or Phone. The issue is only with iPhone that I am aware of. If my iPhone is on wifi I can connect no problem, but if I turn off wifi and go to cellular data, the phone will not connect to any of my websites. Every browser I have tried gives similar messages like this: Website ERR_SSL_PROTOCOL_ERROR I have been troubleshooting this for over 3 weeks now and have tried every trick I could find, but nothing works. it has me puzzled that it will work fine for computers inside and outside of the network and phones inside and outside of the network, but will not work when switched to cellular data. If anyone could help me get this working I would really appreciate it. If I need to provide more information I can try an do that as well. Also, when I run tests with SSL Labs, I get A+ rating so I am just at a loss.

I am sorry if this is in the wrong place. I looked for a specific place to post this but could not find anything that looked correct. If this needs to be moved, please do so. I have multiple Websites Running on Nginx Docker and Nginx Reverse Proxy Docker on Unraid 6.9.2. All works absolutely perfect from any Computer or Phone. The issue is only with iPhone that I am aware of. If my iPhone is on wifi I can connect no problem, but if I turn off wifi and go to cellular data, the phone will not connect to any of my websites. Every browser I have tried gives similar messages like this: Website ERR_SSL_PROTOCOL_ERROR I have been troubleshooting this for over 3 weeks now and have tried every trick I could find, but nothing works. it has me puzzled that it will work fine for computers inside and outside of the network and phones inside and outside of the network, but will not work when switched to cellular data. If anyone could help me get this working I would really appreciate it. If I need to provide more information I can try an do that as well. Also, when I run tests with SSL Labs, I get A+ rating so I am just at a loss.

Is there anyway to clear the ARP table? I am sure the issue is the Firewall detecting the 10gig interface and getting confused on which is which. The switches have 8 1gig ports and 2 10gig ports I have the vlan turned on both servers but do I have to make adjustments to the Firewall to know how to use the vlans? I created the vlan but it didnt seem to do anything that I can tell.

Sorry didnt notice the screenshot about that. I will look at that. What do you mean by this? "But if switches have 10G and 1G then why don't simple setting in single subnet." They are already on different subnets. What else could be changed?

I have 3 switches that have 1 gig ports and 10 gig ports both servers and my pc connect through the 10 gig ports for the 10 gig traffic. None of them are hooked directly to one another. I can set a vlan if you can tell me how to do that? I see it in the network settings to enable it, is that all I have to do is enable it on Unraid ?

1gig interface is for Internet 10gig interface is for transferring files back and forth. I have 2 servers, 3 switches and my pc with 1gig and 10gig interfaces. All 10 gig interfaces are set static so the 10gig traffic doesnt get mixed with the 1gig interfaces.

The 10.10.0.1 gateway does not exists, I put that in there to try and trick it to not talk to the 192.168.199.x gateway. I have removed it and still no difference. I am not sure how this vlan works. My firewall does have vlan ability but I am not sure how to set that up. Would you be willing to help me? The Unraid server is sitting right next to the Firewall, but the Firewall does not have 10 gig capability. Can vlan still work?

My Unraid server (SMCS-NAS) has 1 1gig Interface (eth0) 192.168.199.3 and 1 10gig Interface (eth2) 10.10.0.3. I am running Dockers for Webserver, Nextcloud, NginxProxyManager, etc.. and they all work great but having 1 issue and hope someone can tell me how to resolve this. I am running a firewall and ports 80 and 443 are forwarded on the eth0 interface correctly to NginxProxyManager. tested and all works as it should but about every 10 minutes or so the server identifies its self to the Firewall as SMCS-NAS on the 10gig eth2 interface but gives the ip of 192.168.199.3 but in reality the ip is 10.10.0.3 so all of the port forwarding fails until it re-identifies its self on the 192.168.199.3 eth0 interface, then it all works again. My question is this I think, how can I tell the Unraid server not to identify its self on the 10gig adapter? i have tried everything that I can think of. I have changed Network settings for that adapter but makes no difference. Here are some screenshots of my Network Settings. If anyone can be of assistance I would be very grateful. I have been troubleshooting this for 3 weeks now, but nothing I do seems to make any difference.

Sorry im new here and saw your reply under mine and thought you were asking me that question. Can you help me with the issue im having?

I am using the linuxserver.io container

I have setup Nextcloud in a docker and all works perfect except the following. I can connect via any web browser and upload/download files, but if I go out of my network I cant access Nexcloud with Safari or the ios app, but if I am in my network I can access it with Safari and ios app, but even outside of my network I can access via pc browser. Can anyone help me with this? I just dont understand what is going on with it. I am using Nginx Reverse Proxy as well. All works great except the access outside of the network with iphone. If you have anything that I can try, I am all ears. Thank you in advance!