francishe

I suddenly realised it might need a reboot to murge it as a part of the system. I did and it's working well bringing down the power consumption by 40w. Again thanks

Thanks for the reply. After I installed it nothing happened nor sas spindown operation could be found in the system log though I set spindown delay to 15m which worked well on other sata drives.

Thanks for the plg. But no luck on my 6.11.1 server. I've got 4 Seagate SAS ST6000NM0034, none of which willingly spins down at the spindown delay according to the system log.

Many thanks. Looking forward to your update.

Thanks for the app. My server sleeps throughout the night and autoawakes in the morning, which means I want the parity check in the daytime. My setting: The parity check started as sheduled and paused at the pause time. But the next morning after the array started the check didn't resume, forgetting it had imcomplete check task. Anything wrong with my settings?

Thanks for your help. I have followed exacrtly your steps and added 2nd disk manually by /dev/disk/by-id/ata-xxxxxxxxxxxxx instead of adding a vdisk. Till the end no errors were warned. At the iniatial setup page it told no disk was detected though I checked again the "controller=1" was correct. =========================================================================================================================== menuentry 'RedPill DS918+ v7.1.0-42661 (USB, Verbose)' { menuentry 'RedPill DS918+ v7.1.0-42661 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { Updated user_config with USB Command Line : withefi earlyprintk syno_hw_version=DS918+ console=ttyS0,115200n8 netif_num=1 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132E53953 sn=1780PDN021755 vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=1000 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=1 log_buf_len=32M root=/dev/md0 SataPortMap=16 Updated user_config with SATA Command Line : withefi earlyprintk syno_hw_version=DS918+ console=ttyS0,115200n8 netif_num=1 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=2 syno_port_thaw=1 mac1=001132E53953 sn=1780PDN021755 vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=1000 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=1 log_buf_len=32M root=/dev/md0 SataPortMap=16 Machine is VIRTUAL Hypervisor=KVM Cleaning up files Caching files for future use Found /home/tc/redpill-load/cache/ds918p_42661.pat, copying to cache directory : /mnt/sdb3/auxfiles Saving user session for future use. Saving current extensions -> OK ! Saving current user_config.json -> OK ! tc@box:~$ ================================================================================================================= I have tried adding a vdisk and it is working now, but passing through a physical disk is no luck.

Help, please It failed to locate the physical disk passed through to it. Does it work on vdisk only?

6.9.1可以，或升级到6.10.3也正常。

unriad对几款apc电源支持不好。我采用折中办法，虚拟机上有黑裙，通过它的ups配合nut支持很好，断电后2分钟unraid自动关机，电源信息也都显示正常。

我是三星的nvme 1T，x99主板，6.10.3运行没问题。

今天开机遇到同样问题。刚在英文论坛中找到解决办法，运行： touch /usr/local/emhttp/state/flashbackup.ini 我运行后warning提示消失了。

以失败而告终，网上能找到的方法都试了，就是不行，也试过nginx proxy manager，还是不行，不知是哪里的问题。正好我装了黑裙虚拟机做特殊用途，用它自带的反代服务器导入证书，一切都正常了。

非常感谢您的耐心指教，无奈本人愚钝。用duckdns，始终停在“swag成功”界面，我甚至直接用你的反代配置文件，修改为我的server name和server ip，还是到不了unraid界面。改用cloudflare dns验证，二级域名cname到ddns，结果一样，外网停在“swag成功”界面，但内网用域名访问，返回的是10.0.0.253 ros的界面，而unraid的ip是254（在config中已指定set $upstream_app 10.0.0.254;）

把网络重新调整了，现在外网访问ddns出现“swag成功界面”，但访问unraid还是不行，也参考了你的配置文件。还是对swag用法不熟。

感谢指教。参考了你的配置，外网用ddns访问还是不通

如题。 我的网络环境： ros+openwrt unraid 6.10.3的网关、dns指向openwrt，按照https://post.smzdm.com/p/akxzqzzk/ 教程安装了swag，ddns为duckdns，启动后log显示server ready，ddns指向的ip正确，但是里外网均连接失败，路由器里已将外网4443端口转发到unraid的443端口。请教还有哪里设置的不对？

如题。 我的网络环境： ros+openwrt unraid 6.10.3的网关、dns指向openwrt，按照https://post.smzdm.com/p/akxzqzzk/ 教程安装了swag，ddns为duckdns，启动后log显示server ready，ddns指向的ip正确，但是里外网均连接失败，路由器里已将外网4443端口转发到unraid的443端口。请教还有哪里设置的不对？

Hi, I am also using x99 board and having the same issues wit you. Have you solved them and how? Thanks. Solved by reading the thread on page 28.

HI, Thanks for the advice. I am now using influxdb 1.8.4-alpine. I have been trying for days to get it through but all in vain. I have tested on either uud 1.6 and TR's db for unraid nut ups, none of which favoured me. In the Query inspector I saw data was null when using nut datasource and data came in when switching to telegraf. Neither of them gave me readings on the db. There must be some variables I should know. a little bit frustrated. Again I attach part of the logs here, hoping someone would give a little look at them and help me out. Thanks in advance. From telegraf =========================================================== [httpd] 172.17.0.1 - root [02/Apr/2021:16:04:47 +0800] "POST /write?db=varken HTTP/1.1" 204 0 "-" "python-requests/2.21.0" 178c6a51-938a-11eb-9125-0242ac110002 10476 [httpd] 172.17.0.1 - root [02/Apr/2021:16:04:47 +0800] "POST /write?db=varken HTTP/1.1" 204 0 "-" "python-requests/2.21.0" 17c5704f-938a-11eb-9126-0242ac110002 6108 ts=2021-04-02T08:04:51.147415Z lvl=info msg="Executing query" log_id=0TGJnhvG000 service=query query="SELECT last(\"battery.charge\") FROM nutupstest.autogen.ups_status WHERE time >= now() - 1h GROUP BY time(30s)" [httpd] 10.0.0.143, 10.0.0.143,172.17.0.1 - - [02/Apr/2021:16:04:51 +0800] "GET /query?db=nutupstest&epoch=ms&q=SELECT+last%28%22battery.charge%22%29+FROM+%22ups_status%22+WHERE+time+%3E%3D+now%28%29+-+1h+GROUP+BY+time%2830s%29 HTTP/1.1" 200 57 "-" "Grafana/7.4.5" 19bc4678-938a-11eb-9127-0242ac110002 483 ts=2021-04-02T08:04:51.147415Z lvl=info msg="Executing query" log_id=0TGJnhvG000 service=query query="SELECT last(\"battery.charge\") FROM nutupstest.autogen.ups_status WHERE time >= now() - 1h GROUP BY time(30s)" [httpd] 10.0.0.143, 10.0.0.143,172.17.0.1 - - [02/Apr/2021:16:04:51 +0800] "GET /query?db=nutupstest&epoch=ms&q=SELECT+last%28%22battery.charge%22%29+FROM+%22ups_status%22+WHERE+time+%3E%3D+now%28%29+-+1h+GROUP+BY+time%2830s%29 HTTP/1.1" 200 57 "-" "Grafana/7.4.5" 19bc4678-938a-11eb-9127-0242ac110002 483 [httpd] 10.0.0.254 - - [02/Apr/2021:16:04:56 +0800] "POST /write?db=telegraf HTTP/1.1" 204 0 "-" "Telegraf/1.18.0 Go/1.16.2" 1caac777-938a-11eb-9128-0242ac110002 28741 ts=2021-04-02T08:04:56.158751Z lvl=info msg="Executing query" log_id=0TGJnhvG000 service=query query="SELECT last(\"battery.charge\") FROM nutupstest.autogen.ups_status WHERE time >= now() - 1h GROUP BY time(30s)" [httpd] 10.0.0.143, 10.0.0.143,172.17.0.1 - - [02/Apr/2021:16:04:56 +0800] "GET /query?db=nutupstest&epoch=ms&q=SELECT+last%28%22battery.charge%22%29+FROM+%22ups_status%22+WHERE+time+%3E%3D+now%28%29+-+1h+GROUP+BY+time%2830s%29 HTTP/1.1" 200 57 "-" "Grafana/7.4.5" 1cb8f419-938a-11eb-9129-0242ac110002 394 ts=2021-04-02T08:05:01.171746Z lvl=info msg="Executing query" log_id=0TGJnhvG000 service=query query="SELECT last(\"battery.charge\") FROM nutupstest.autogen.ups_status WHERE time >= now() - 1h GROUP BY time(30s)" ============================================================================ From nut-influxdb-exporter ng to NUT host 10.0.0.254:None d successfully to NUT tting data from NUT ng to InfluxDB host:10.0.0.254, DB:nutupstest d successfully to InfluxDB ng to NUT host 10.0.0.254:None d successfully to NUT tting data from NUT ng to InfluxDB host:10.0.0.254, DB:nutupstest d successfully to InfluxDB ng to NUT host 10.0.0.254:None d successfully to NUT tting data from NUT ==================================================================

Hi, thanks for sharing. I am using nut ups and have installed nut influxdb exporter, which seemingly does not send data to influxdb. The log shows always connections refused. Mind advising how to get it done and what to change in variables?

I removed as you did, but it didn't work for me, still getting nothing in "VM Details" Solved by removing last two lines. Seems a problem of width, too wide to be displayed.

Hi, thanks for your tutorial, but i didn't get any icons/image like yours after following your setup. Any suggestion?