ElementBreaker

Members
  • Posts

    6
  • Joined

  • Last visited

ElementBreaker's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Is there a way to enable MCS with this plugin? I'm new to using iSCSI but I don't seem to be able to.
  2. Unfortunately no, I changed the daemon port and need to be able to change it back.
  3. Changes I make to core.conf seem to reset on restarting the container, is there a way around this? I need to change my daemon port back to the default. Currently unable to access the web ui.
  4. Hello, after an unclean shutdown two of my disks were marked with red X's. I removed them from the array, started and stopped the array, then re-added so the data rebuild could start. After it finished my disks are marked as "Unmountable: Not Mounted". I've tried several of the btrfs specific commands including rescue and --repair and they all fail immediately with an error like: ERROR: superblock checksum mismatch ERROR: superblock checksum mismatch ERROR: superblock checksum mismatch ERROR: superblock checksum mismatch No valid Btrfs found on /dev/sdi1 I then tried removing both from the array again, and using the UD plugin, but the fail to mount immediately and it doesn't look like anything makes it to the logs. The only thing I've learned from my googling is to not use btrfs for data disks in the future Now, I am still a bit new to unraid so I'll mention a change I made maybe a week before this. I had two 6tb disks for parity, I plan on moving my array to 14tb disks and got my first one in so I removed one of the 6TBs, added it to the array and formatted it, then added the 14tb as a parity drive. All seemed to be working well after a parity sync so I left it at that, I did not run "New Config" or anything else after, I'm not sure if I'm supposed to do that after or not. Like I said I'm still a bit new so please let me know if there are any relevant logs (EDIT: See attached) you'd like to take a look at, one of the unmountable drives has losable data, but the other has all my important data. Thank you. svrunrwx-diagnostics-20210413-1900.zip
  5. Hello, has anyone been able to adjust their fan thresholds with ipmitool? I can't see what they're supposed to be as they just come as "na" when I run the command so I'm not sure what would be a safe value to set it to. Additionally I tried using raw commands but none went through, I can't seem to find HPs documentation for it. I have a DL380 Gen9. If this should be posted elsewhere let me know, I'm new.
  6. I've tried to get anonymous authentication working, but no luck. I've tried GF_AUTH_ANONYMOUS and setting the value to true but it doesn't seem to work. The documentation here makes it seem like this isn't doable https://grafana.com/docs/grafana/latest/auth/grafana/#anonymous-authentication I want to set up grafana with a reverse proxy so I can send anyone a link and they can view a dashboard without having to sign in. Is this possible? Thank you.