devros

I just upgraded to a new system with a new motherboard and new expander/backplane(old one was Supermicro as is new one) Using the same Broadcom 3008 based card. Everything came up fine, but Unraid is no longer reporting hard drive temperatures for drives on the backplane. Anyone seen something like this before? thanks, -dev

For at least 10 years I'm just been using Transmission on my Mac for dealing with torrents. I don't do a lot of torrenting and won't be plugging this into Radarr/Sonarr or anything like that. What I'd like to do is switch to something running in docker on my unraid server with a watch folder on my Mac. Aside from wanting a decent GUI/CLI, I need to have the level of control where I can base seeding ratios by tracker and keywords in the torrent. Deluge with plugins looks like it might be a good way to go, but before I spend too much time looking at all the options, figured I would get the opinions of the folks here. TIA, -devros

Just switch to lsiodev/ombi-preview It's been working great for me, but you do have to set it up fresh. V2 was crashing all the time on me. V3 has been really great for the past 2 months I have been using it

I've been using lsiodev/ombi-preview. Seems to be working great so far except is won't do newsletters yet. For that I've switched over to https://github.com/ninthwalker/NowShowing which has been working great so far and is more customizable. You do need to start from scratch with your configs though. Ombi v3 will not upgrade a v2 config.

That worked great, thanks. For some reason, even with the share unmounted, the. name was still showing up as if it was a link.

I'm using the plugin now to mount a NFS share hosted on another linux box in my house. Just wondering if there is any way to change the local path that share gets mounted at to something other than /mnt/disks/<IP of server>_<name of share>. It would be nicer if I could just have it mounted at /mnt/disks/plexdl. This feature exists for mounted local drives. TIA for any help, and I apologize if I missed something really obvious here

I assume you are talking about the email_body.erb file? I just want to add a sentence and a URL at the top of my emails. Any good WYSIWYG editors you would suggest to make customizing that a little easier(I'm on a Mac) TIA. Really loving the software!

Switched branches and all is well. I thought I had read somewhere that this was fixed in the dev version. Happy to be on the production branch with everything working. Thanks for the quick reply!

I seem to be getting the issue where the year is not showing up. Everything else seems to be working fine. Running the dev release. Anything I can try? Thanks, -devros

I was trying to get monitoring up with HD temperatures with influx/grafana/etc... and in following a guide installed a docker that allowed access to /dev. I accidentally gave it read/write access. Moments after turning it on I got a message about errors on 5 of my 10 disks. I stopped the container right away and started a parity scrub, with write corrections to parity checked. It only ran for a few mins, but basically found(and corrected) errors on what looks like every sector it scanned. I forget the total # but it was probably a million or more. I stopped the scrub, did a reboot and did another scrub(without writing corrections) and it only found one or two errors. How worried should I be and what are my options? I have a 10 disk setup with double parity. thanks, -dev

Would it be possible to get the Ombi docker updated so there is an option to run the v3 beta?

The problem is that PlexPy is running on the same unraid server, so if something goes wrong with the server then I wouldn't get notified, hence my desire to use an external monitoring service.

I'm looking to setup an external monitoring service to check and alert me if my local plex server is down, Ombi and a few other things I run. Would be under 5 checks and I know that many services out there have a free tier for that few service checks. Was just wondering what others here have used. Someone had mentioned Pulseway to me a while back, but there are so many others out there, I figured I would ask here first. thanks, -dev

I have almost the identical case. I put in a PWS-721P-1R 720W power supply and 5 x Noctua NF-A8 PWM Premium 80mm fans. You have to do a little work to get the connector that comes with the Noctua fans to fit in the slot of the fan cover/case, but unless you are constantly taking them out, it shouldn't matter. My temps have been fine, and it's night and day difference with the noise.

What would I need to change to have it pull down/run the v2 branch? thanks, devros

Is there no way to leave it unconfigured and still have the link come up? The way I'm using it, I don't need it to have it's own IP

I have a second NIC that I have plugged in, but not configured that I use with the macvlan driver to assign other IPs to some docker containers. On boot, this NIC doesn't come up automatically and I have to go to network settings and do a "Port Up" to get it to come online. Any way I can set this to happen automatically?

Will you have an update for 6.3.4 soon? I had just upgraded when I stumbled onto this plugin.

Is there anything like this for v6?

I just did the same thing. Glad I found this post!