elgatobavaria

Regarding to the specs of the Asus P11C-I the i7 CPU i use at the moment is not supported --> Link to spec ..> But its working so everythig is fine 🙂 Why especially the Zx90 series ? I thought the Z-series is only usefully if i plan to overclock RAM / CPU ? Good to know, thank you for the info . The spec sheet only says "GPU Controller - CPU pGFX" and i do not know what this means.

This Mobo was not on my list yet, thank you. On the P11C-I there is one more thing i am annoyed of, the iGPU of the CPU is not routed and can not be used. How is the behaviour on the ASROCK Rack C246 WSI ? Do you have any experience with this board ? In common do you prefer mobos with 'C" chipset and why should i use this kind of chipset in my case ? So many questions .... Sorry but i want to learn as much as i can 🙂. Thunderbold is only "nice to have"

Hi guys, as written above i need some help finding a motherboard that fits for my needs. Honestly iam not sure if a change is really a good decision. But maybe a discussion can help me to find out. My current situation: - Motherboard: ASUS P11C-I (mini-ITX) - Case: Fractal 304 (mini-ITX) - CPU: I7 9700 ( No ECC support ) ---> The i7 9700 replaced a 9100 because of the performance with VM - RAM: 16 GB ECC Ram ( I do not really need ECC ) - VM: WIN10 for Gaming / Working CAD - GPU: 3060 TI What are my needs / what would be great: - Reuse of my CPU (socket 1151) / Case - Low power consumption when idle - ~40W max - ( i know the GPU can not really "low power" ) - GBit ETH - Min 4x SATA 6Gb with the possibility to make 6xSata 6Gb (via adapter card etc.) - RAM with enough speed for gaming and no ECC ( P11C only support 2666 Mhz) - Good IMMO Groups for the VM + if possible IMMO groups for USB Ports, too - USB Header for front USB - If possible thunderbolt ? - In a price range what can be afforded A already saw in some forum entries suggestions for motherboards, but most of the time the context was NAS only (Sata > 4 or 6) without VM. Would be great if i can discuss with somebody here. EDIT: Trigger for this post was that 16GB ram is not enough and i do not need ECC RAM Best regards, Mathias

@Squid what are the frequencies on the right side ? On load the frequencies go up ...

Hi guys, im wondering how to see the 'real' CPU frequency. I tried two different approaches and got different frequencies. Maybe someone can make the things clear. As can be seen in the picture below i tried two different methods. The rigth one is via 'corefreq-cli'. Best regards, Mathias

In the first post you can find the download. The script name is "ExecuteFanControl.sh" . I think it should not be necessary to re-make "panq" again. Try the script on your system first.

I just tried the steam lib on the NAS share. Most of the games work, but for example Call of duty WW2 is not starting.

Hello together, maybe any expert can give me a hint with my question. At the moment i got a ASUS P11C-i mainboard working with an i3-9100 and 16GB ECC RAM. After buying a Geforce 3060 TI for working with a VM i recognized that the CPU is little bit to slow ( and not enough cores ) to work with the WIN10 VM ( gaming etc. ). I was looking for a faster CPU to replace the i3-9100 and found the i9-9900k. And now im asking myself a few questions .... 1. Is it possible to run the 9900k on the P11C-I mainboard ? ( regarding to the datasheet - NO, only i3, xeon, pentium ) --> But looking at the chipset - YES --> Maybe the i9 was not on the marked when the datasheet was released... 2. Is it possible to run the 9900k with the ECC RAM ( ECC is not supported by CPU but i dont need ECC ---> So if RAM is working without ECC it would be ok for me ) EDIT: A working CPU alternative which is not more expensive than the 9900k is welcome, too 🙂 EDIT2: Bought the CPU and tried if it works. And it works very good with low idle power. Best regards Mathias

Hi Guys, i run Unraid on a QNAP TS-253Be because the QTS OS is crap in my point of view. For controlling the FAN i took a tool called PANQ from here: https://github.com/scottshanafelt/TS-877 , executed MAKE and wrote a shell script to check the temperatures and control the FAN by a table. Maybe someone is intrested in using it or has some suggestion for improvement ( plus skills to support the suggestions ). I have no expert skills in shell scripting / linux so have forbearance. Best regards, Mathias 12_PanqFanControl.7z

You can use a docker container for running restic. All you need is: -Docker Container with restic (own one or from dockerhub) -User Scripts to run backups cyclic -Unassigned devices (if you want to copy to ext drive) Here is my actual progress. At the moment iam wondering why the backup is so slow... And copying isn´t working as expected.. Backup script: pw="/mnt/disks/Samsung_Flash_Drive_FIT/10_Scripte/11_ResticBackup/.resticpwd" src="/mnt/disk2/HDD2_4TB/99_ResticRepo/ backup /mnt/disk1/HDD1_3TB/10_Homes" dest="/mnt/disk2/HDD2_4TB/99_ResticRepo" tag="HomesFolder" #Backup and clean repo docker exec debian restic -r $dest backup $src --tag $tag --password-file $pw docker exec debian restic -r $dest forget --keep-within 2m --prune --password-file $pw Copy script --> Internal Backup to USB drive if connected # srcPath="/mnt/disk2/HDD2_4TB/99_ResticRepo" dstPath="/mnt/disks/JMicron_Generic" #Waiting time to secure mount accomplished sleep 10 beep -f 587.3 -l 122 -d 0 -n -f 370 -l 122 -d 0 -n rsync -av --stats "${srcPath}" "${dstPath}" & pid=$! # If this script is killed, kill the `rsync'. trap "kill $pid 2> /dev/null" EXIT # While copy is running... while kill -0 $pid 2> /dev/null; do # Do stuff #echo "Rsync is running" sleep 1 done beep -f 587.3 -l 122 -d 0 -n -f 370 -l 122 -d 0 -n # Autounmount, wenn nicht gewuenscht, einfach ein # davor setzen. sleep 120 umount -f -l "${backup_root_path}" # Notification /usr/local/emhttp/webGui/scripts/notify -i normal -s "Disk ausgehangen." -d "Backup abgeschlossen, Medium kann entfernt werden." # Disable the trap on a normal exit. trap - EXIT

@D.Romeleitis Für welches Board und welchen Prozessor hast du dich jetzt entschieden ? Aktuell bin ich auf dem TS253Be, welches auch mit dem J3455 arbeitet. Würde aber gerne ein wenig upgraden ( wegen WIN10 VM ). Stromverbrauch ist mir aber auch sehr wichtig, da ich kein Business-User bin. Mir persönlich wäre ein m-ITX am liebsten :-) Gruß, Mathias