foo_fighter

Awesome! Didn't know it was out The container is building now, so should be ready in about 30 minutes.

Any chance to get this updated to 1.9.5?

Intel RS2WC080 Card Sorry...maybe a non-sequitur. I thought this thread was for all LSI clone cards...but yes I can see the chain of messages that lead you to think it was a Dell card. Now I'm quite confused. Did you flash a RS2WC080 or a Dell Perc H310 in the end? When answering your first post I was thinking of a Dell card because the recent posts in this thread referred to the H310 card only. Next time you should clearly point out what you want to do. Due to a misunderstanding like this you could have easily bricked your card when flashing a wrong firmware! Good to hear it worked after all.

Yes, that worked. Copied both files and the sas2flsh.exe from the new zip. This has got to be one of the scariest things(unraid related) I've done in a while. First I was using an Intel RS2WC080 Card that hardly anyone(maybe 2 others) here has tried. (Scored it on ebay for $67 with bracket and 2 forward cables!) I got through step 1, then step 2, then it failed at step 3(No LSI controllers recognized). Not sure, what to do so I flashed it using the Intel utility to its latest(Flash package = v20.11.1-0135 (firmware 2.130.384-2166)) Then rebooted, No RAID bios! Uh oh. Also the boot order keeps changing around every time the raid card gets reconfigured. Tried to start over from step 1 but that failed(some about no mouse detected and then it spit out non 0x0 error codes) Then I tried step 3 again and it finally worked.....of course I go straight to 5it without rebooting...and it was stuck at: Chip is in RESET state. Attempting Host Boot... Another gray hair moment(do I reboot?!!!!) Rebooted (again no raid bios...which is expected) Tried step 5 again and it got past the host boot and started flashing! BTW, no PAL errors on an ASUS P5LD2-VM 2.0 Was nervous in step 6 about using capital letters for the hex code or not (Used lower case)....worked. Reboot, drives now recognized in unraid syslog! Success! Lost a couple years from stress where it was touch and go.... This will probably solve the ManPage2 error when flashing the FSC D2607. With regard to the changes in P17: From my understanding, the changes in the new version add no benefit for unRAID use.

To go straight to P17 can I just replace the 2118it.bin and the mptsas2.rom file from the lsi zip file(9211-8i_Package_P17_IR_IT_Firmware_BIOS_for_MSDOS_Windows.zip)?

Thanks for this idea! BTW, I don't know where the official list is but I'm using: an ASUS P5LD2-VM R2.0 with a cedarmill celeron and s3 seems to work fine. I've used both acpitool -s and s2ram -f I added a sync command before the suspend just to be extra safe.