xsk

貌似我昨天也遇到一次，从iLO的远程控制台都连不进，最后只能reset电源。重启后看了下rsyslog里并没有发现重启前有任何严重的错误日志。

Cache pool你可以简单理解就是另外一个阵列(单盘cache就当是个快速的单独分区），但你需要配置一下怎么使用这个快速分区。 unraid的缓存和大家通常意义上理解的那种cache不完全一样。如果你不想看文档，快速简介在：打开Shares界面查看Share settings下面关于‘Use cache pool'部分的说明，如下图 除开 No 是不使用cache，另外三个‘Yes, Only, Prefer' 是三种不同的使用cache的策略。

hello, I'm considering buying a A2000 too when doing research i saw your post. Have you fixed the issue and successfully set it up in your unraid windows VM ?

理论上也是可以的，但改host的办法不是完全靠谱有时候可能也会失效。如果路由器上的梯子工作正常就没必要去改unraid的host文件

跨境wg确实会被封，尤其传输流量大的。你要跨境还要速度快只能靠线路质量了估计

wireguard就行了，管它远程跨不跨境都一样用。

墙引起的网络问题。可以路由器上自行解决

因为你把日志发送到 192.168.50.4:1514 的远程rsyslog服务器了。你要本地生成，远程服务器那里就填unraid的IP + rsyslog服务端口 192.168.50.4 是你unraid的IP还是远程rsyslog服务的ip？

你开启了2FA，使用的基于时间的验证器，输入你验证器 app里显示的token就行了。

I wanted to disable intel_pstate for switching to acpi_cpufreq to save some power. But after some search, i realized that the 'powersave' governor is roughly the equivalent 'ondemand' in acpi_cpufreq. Previously when my server is idling, cpu mostly stays at 4.1GHz and cpu temperature is over 40C. (room temperature 20C) After switched to 'powersave' governor, the frequencies now scales dynamically, cpu temperature mostly stays around 35-36C. For those only wanted to switch to acpi_cpufreq for 'ondemand', you can just set to 'powersave' in intel_pstate driver no need to change to acpi driver. ( the 'powersave' from acpi driver will set your cpu to the lowest frequency static, it is quite different!) Btw, notice for HP servers, if you want to disable intel_pstate you probably need to disable CPC (collaborative power control) from RBSU/Bios but it will going to be changing some other related power configs. (I tried 'intel_pstate=disabe' but it didn't bring me to acpi_cpufreq driver after rebooting.) So i decided to stay with intel_pstate Anyway, still thanks to Joedotmac for the steps above

哎我买那会还没优惠码这事呢，现在有专门给中国用户的优惠码了？ 这个码能用来升级版本吗？

1. 添加不用写0，格式化一下就行了吧 2.移除后最好还是不要跳过计算校验

thanks ! i confirm 2023.03.31a is ok now

same issue here. how can I rollback to previous version?

开心版还是官网版本unraid？ 建议不要使用来路不明的版本

unraid整个系统都在u盘，所以只要u盘没坏就能启动。 理论上数据盘你换过来到新机器，然后用原来u盘启动就行了

unraid的多个磁盘组成的总空间不是LVM那种逻辑卷的模式，单个文件不能拆分到多个磁盘。

非常感谢，bypy脚本很好用！