RandomFactoid

Hi, I am trying to set up backup transfers via SFTP from server A to my Unraid server. I've allowed SSH access to a new unraid user I've created. That user only has Read/Write permissions to one Private share that I set up specifically for that user. However if I SSH with the user credentials, I have access to pretty much everything (media/appdata/etc), even though under Shares appdata is set to No Access. (alarmingly - i can easily read the Authelia config inside appdata...makes me think I need to go through docker created file permissions in general). Does 'Shares' settings not affect access that SSH users get? Thanks!

Well..just figured that Unraid Connect automatically backs up the flash drive, which is great. Problem fixed, but unsure if i should upgrade again. Will leave this here in case it turns out a more widespread bug.

Hi! Came back home quite tired and randomly decided to upgrade unraid...and for the first time didn't back up my USB as all the previous updates went really smoothly. Unraid refuses to boot and gets stuck on the OS selection menu (attaching video from iLo). Choosing the 1st option manually just cycles the timer back to 5 seconds. Other choices don't work either. I was unable to attach the video directly, so here's the link: https://imgur.com/a/5plRu5K (might need to fullscreen) Any ideas ? Thanks

Thanks. Just did - will see what happens. Why would this work ? Known issue ? Just curious.

Hi. I have a user set up for my wife to access samba shares. Oddly, i've just noticed having ran 'ps aux' in the terminal that Redis docker process is running as my wife's username. Really bizzare. My docker run is here: docker run -d --name='redis' --net='delta' -e TZ="Europe/London" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Adulis" -e HOST_CONTAINERNAME="redis" -e 'ALLOW_EMPTY_PASSWORD'='no' -e 'REDIS_PASSWORD'='REDACTED' -e 'REDIS_EXTRA_FLAGS'='--auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.icon='https://raw.githubusercontent.com/A75G/docker-templates/master/templates/icons/redis.png' -p '6379:6379/tcp' -v '/mnt/user/appdata/redis':'/bitnami/redis':'rw' -v '/mnt/user/appdata/redis/bitnami/':'/bitnami/':'rw' 'bitnami/redis:latest' cb9782ae170734f876e2587f63b06b0105c2e8b800ff7edc698e553f63a8a106 The command finished successfully! root@Adulis:~# ps aux |grep redis wifesusename 20655 0.5 0.0 35248 12972 ? Ssl 18:47 0:00 redis-server 0.0.0.0:6379 root 21159 0.0 0.0 4048 2216 pts/0 S+ 18:47 0:00 grep redis Really bizzare. Any idea why that's so ?

I thought it'd be included in diagnostics. Here you go. Thanks for helping out. syslog

Hi all, I have recently upgraded from Microserver gen8 to Gen10+ and started having occasional system slowdowns/freezes. These events happened roughly 2-3 times each in the last 2 months or so: -Unraid UI becomes incredibly slow. Login page loads fine, logging in doesn't complete with just the orange Unraid logo loading. This happened again today, however I managed to pull diagnostics via ssh. Last time it happened, SSH was also extremely sluggish. After entering password, it'd take minutes to get to terminal and any command would take ages to complete. Ping to server was normal (1-3ms, no packet loss). -I would find the system frozen completely. No access to WebUI/ssh, however dockers would continue working. Reboot solves the problem. After pulling diagnostics I've also tried /etc/rc.d/rc.nginx reload - no effect and /etc/rc.d/rc.docker stop - no effect Any ideas ? Thanks adulis-diagnostics-20230309-0643.zip

I don't think I can get diagnostics from it - terminal is just stuck for 15-16 minutes now. Might leave it overnight to see if it manages to digest something. What should I blame for this.. ? RAM? Usb flash ?

Just started getting this issue. I found a post with a very similar looking problem from mid-2022, but posting this as a separate thread for easier followup. All dockers work and are easily accessible via their interfaces. SSH to the server takes forever to prompt for password, after entering password - at least a few minutes to show terminal. GUI has now been loading for at least 5-10 minutes and hasn't yet come up. I managed to get to the terminal eventually. `top` doesn't show any excessive shortage of resources (attaching screenshot). Ping to server <1ms and no packet loss. Recently, perhaps 2-3 times the server required button-reset as it wasn't accessible. It's a microserver gen10plus and stupidly display port doesn't work unless you connect something to it from boot. Considering getting the iLO enablement module. Trying to run 'diagnostics' in terminal, but so far it's taking forever and I'm not yet sure how to retrieve that file as getting to the server via samba doesn't seem to be an option too. Ideas ? P.S Unraid 6.11.5 EDIT: webui finally loaded with error 500 (500 Internal Server Error). Waiting for diagnostics to generate.

Hi, I updated to 6.10.3 recently and whenever I try to access the local IP address, it tries to use SSL, but I get 'Connection not secure' or 'Certificate not valid'. Previously whenever I addressed the IP directly it would translate into the long *.unraid.net address and work fine. I have cleared and 'Provisioned' new certificate without it fixing the issue. Diagnostics attached. Thanks adulis-diagnostics-20220618-1440.zip

Seems like I'm raising a topic from the dead, but got the same issue here on 6.9.2. 'Remote tunneled access' only grants me access to the unraid server, but not other LAN ips or WAN.

Solved. Issue was to do with wiring between the main router and node router that the server is attached to. Somehow the link got limited to 100mbps - solved with a router reboot.

this is what running ethtool eth0 shows - seems like it's running at 1000 already ? GUI also says it's running at 1000mbps. I literally did not do anything except update to 6.10.1. # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 1 Transceiver: internal MDI-X: off Supports Wake-on: g Wake-on: g Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err Link detected: yes

Just downgraded back to 6.9.2 and the speed remains low. Strange.