paramehdic

At least in my case I believe the UPS is defective, switching to a different UPS has been stable thus far although with mine the issue was very intermittent (could have upwards of 30 days uptime before an issue).

I did not, however I suspect the UPS (battery backup) may have been the issue.

Based on when syslog-previous ends (for date/time) it doesn't appear that the crash was actually captured. Not sure if there is a setting I have missed since it occured approx June 5 at 8pm est.

I had it setup to mirror to flash and attached current/previous. syslog syslog-previous

I appear to have a very intermittent (maybe once a month or longer) shutdown that I believe is related to this message in the log "Received signal 15; terminating." Diag attached. unraid diag signal15.zip

Diagnostics as requested. tower-diagnostics-20240226-2004.zip

After upgrading to 6.12.8 my server randomly shut down and triggered parity check where 26012 errors were found/corrected. I double checked all the drives and nothing appears to be reporting any error or failure. My scheduled parity check just completed with 0 errors (although for some reason the notification still said 26012. Is there anything else I should be checking?

I think this makes the most sense, I will run unbalance for the data it thinks is on the drive, then new config then check for duplicate files after new parity has been calculated.

I removed 2 disks from my array (disk2 and disk3) which went fine following the directions on the Wiki. I then wanted to replace disk4 with a larger disk but mistakenly assigned it as disk2 which essentially was expanding the array again (it also caused many shares to disappear and errors such as full rootfs). I realized my mistake and stopped the rebuild (likely have lost some data but not a major concern) and assigned it has disk4, preclear completed and everything seems to be working fine except the array thinks disk2 is missing and the spare drives I have are not large enough (new drive is 14tb, old were 8tb). As it appears to be emulating data that it thinks was on disk2 will I loose data if I create a new config (like I did to originally shrink the array?) . Little stuck on this one and may end up just ordering another 14tb (which was the plan but the 14tb I ordered was defective and prices have increased so was hoping to avoid buying due non-ideal time). Thanks! Maybe I can just unbalance to transfer the data it thinks is on disk2 to the other drives and then redo the config like I initially did with the shrinking?

My logs didn't appear to be saving and I already rebooted. I have turned on mirror to flash so hopefully if it happens again I will have logs to provide.

Have been having some issues with checksum/md5 with rclone so figured I would do some maintenance. Scrub went fine however balance appears to have caused unraid server to hang (web gui, ssh) but does still respond to ping. Last progress update was 106/123 or close to it (I have since closed the web gui window). Any dockers are also not responding such as Plex Any suggestions prior to hard powering off the server? It has been running now for approx 60 minutes and cache drive is 480gb with 70gb used.

When will or is there a change that can be made to update this to latest version of Plexpy (now Tautulli? http://tautulli.com/) Thanks,

While I was able to resolve this issue last time it was through reinstalling everything and starting fresh. However it appears the issue has returned, same message in log as before. Anything you suggest? Seems like it was an issue earlier on in this thread but didn't see the resolution other than it appears an update corrected it. Thanks Going back through I completed the below step and it appears to have corrected issue and allowed rtorrent to start again rename /config/rtorrent/rtorrent.rc to /config/rtorrent/rtorrent.rc.old and reboot the container

After most recent update unable to start. Also have received

Enable DHT Network and Peer Exchange (under settings, bittorrent) keep re-enabling is there something I am missing to keep these turned off? (seems to stay off for a period of time but always comes back not sure on interval) Also under Downloads/other the Check Has After Download wont allow it to be turned off (it will let you uncheck but is always back when you check settings)

How can I change the default password and do I need to change .htpasswd or is that not required since this is a docker? Also on topic of docker how do they handle resources? Whatever the server has they can utilize or can more resources be allocated? While rTorrent has fixed my speeds issues I was having with deluge it seems to get very unresponsive with only a handful of torrents active (20) whereas deluge I've had over 100 without any such issues. (both were docker images)

I figured out that if you use us-newyorkcity.privateinternetaccess.com it will hang at the above message, once I switched to nl or ca pia servers working fine.

well dont I feel like an idiot I'll keep looking was hoping someone else had already run into similar problem and resolved it

checked spaceinvader on deluge-vpn but doesnt seem to address this issue, not sure who YT is?

2017-05-31 15:44:48,733 DEBG 'deluge-script' stdout output: [info] Deluge not running [info] Deluge listening interface IP 0.0.0.0 and VPN provider IP x.x.x.x different, marking for reconfigur Just trying to setup deluge-vpn and having the above issue/error (at least from what I can tell; also unable to access webui however I think that may be because of the error above.

also seeing a few of these errors in the log as well

plexpy, sickrage and deluge an issue with deluge docker has also been posted https://lime-technology.com/forum/index.php?topic=43430.msg532140#msg532140

diagostics attached tower-diagnostics-20170126-2156.zip

anyone able to help with this, upon checking log see the below errors over and over and its usually the same with the odd error 0 vs error 6 last few parity checks have reported 3 errors cant see any pattern to the segfault as some days there wont be any, other days itll happen every few hours.

after I delete deluged.pid i am again able to start the daemon but then it looses all torrents that were active any thoughts on this issue? i see there is an update for docker but reluctant to do it as dont want to wipe all the data/torrents again.