squirrellydw

Just want someone to confirm what I see, everything look good to me. No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 3. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 3. 0 sectors were pending re-allocation after post-read in cycle 1 of 3. 0 sectors were pending re-allocation after zero of disk in cycle 2 of 3. 0 sectors were pending re-allocation after post-read in cycle 2 of 3. 0 sectors were pending re-allocation after zero of disk in cycle 3 of 3. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. [code/] [code]SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 81 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 126 118 000 Old_age Always - 24 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [code/]

Thanks, another question. I just realized I'm still using 1.13 and not 1.14, I forgot to update it, is this going to be a problem? How Can I stop the pre clear, I have it doing 3 cycles.

any idea how long it takes to pre clear a 3TB WD Red drive? I just started pre clearing one, doing it 3 times

So once I upgrade to 1.14 this will work cd /boot, preclear_disk.sh -c 3 /dev/xxx thanks

What version of the preclear script are you running? 1.13. how do I update it if it's not the latest? 3TB MBR 4K aligned Thanks for the help

running unraid 5.0.3 and getting ready to clear a new drive. Just want to make sure this is correct. I want to clear it 3 times. Drive is a WD Red, do I need to worry about aligning sector 64 or will I be fine with what I have below? cd /boot, preclear_disk.sh -c 3 /dev/xxx thanks

Thanks Joe, any chance you could post a report of excatly what I should be look for each time and what they mean?

Thanks Joe, I only need to look at this part correct? sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 2. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 2. 0 sectors were pending re-allocation after post-read in cycle 1 of 2. 0 sectors were pending re-allocation after zero of disk in cycle 2 of 2. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change.

anyone??

Can some verify that everything looks good? ** Changed attributes in files: /tmp/smart_start_sdi /tmp/smart_finish_sdi ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 115 118 6 ok 98284504 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 High_Fly_Writes = 96 98 0 ok 4 Airflow_Temperature_Cel = 72 74 45 ok 28 Temperature_Celsius = 28 26 0 ok 28 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 2. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 2. 0 sectors were pending re-allocation after post-read in cycle 1 of 2. 0 sectors were pending re-allocation after zero of disk in cycle 2 of 2. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. root@Tower:/boot#

my guess is yes, you can keep the array online. It is one of the main reasons why the utility was written. (and since I wrote the pr-clear script, odds are good my guess is correct) The only limitation is you cannot clear a drive if it is assigned to the unRAID array. (this is to keep you from erasing your data by accident) Joe L. LOL, Joe your guess was right Thanks

Can I keep the array online while I pre clear, my guess is no Thanks

Is it OK to preclear a drive that will be used in windows just to test it for errors?

Here a couple pictures of the inside of mine, based on the 20 drive beast.

Thanks Joe, I never knew what "failing now" was until you just pointed it out.

Joe does mine look ok also? Home page is http://smartmontools.sourceforge.net/ Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: === START OF INFORMATION SECTION === Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Device Model: WDC WD20EARS-00MVWB0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Serial Number: WD-WMAZA0766598 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Firmware Version: 51.0AB51 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: User Capacity: 2,000,398,934,016 bytes Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Device is: Not in smartctl database [for details use: -P showall] Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ATA Version is: 8 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ATA Standard is: Exact ATA specification draft version not indicated Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Local Time is: Sun Jan 9 10:29:57 2011 EST Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART support is: Available - device has SMART capability. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART support is: Enabled Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: === START OF READ SMART DATA SECTION === Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART overall-health self-assessment test result: PASSED Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: General SMART Values: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Offline data collection status: (0x84)^IOffline data collection activity Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Self-test execution status: ( 0)^IThe previous self-test routine completed Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^Iwithout error or no self-test has ever Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^Ibeen run. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Total time to complete Offline Jan 9 10:29:57 Tower preclear_disk-finish[23928]: data collection: ^I^I (37680) seconds. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Offline data collection Jan 9 10:29:57 Tower preclear_disk-finish[23928]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^IAuto Offline data collection on/off support. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISuspend Offline collection upon new Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^Icommand. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^IOffline surface scan supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISelf-test supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^IConveyance Self-test supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISelective Self-test supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART capabilities: (0x0003)^ISaves SMART data before entering Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^Ipower-saving mode. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISupports SMART auto save timer. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Error logging capability: (0x01)^IError logging supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^IGeneral Purpose Logging supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Short self-test routine Jan 9 10:29:57 Tower preclear_disk-finish[23928]: recommended polling time: ^I ( 2) minutes. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Extended self-test routine Jan 9 10:29:57 Tower preclear_disk-finish[23928]: recommended polling time: ^I ( 255) minutes. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Conveyance self-test routine Jan 9 10:29:57 Tower preclear_disk-finish[23928]: recommended polling time: ^I ( 5) minutes. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISCT Feature Control supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ^I^I^I^I^ISCT Data Table supported. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART Attributes Data Structure revision number: 16 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Vendor Specific SMART Attributes with Thresholds: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 3 Spin_Up_Time 0x0027 167 167 021 Pre-fail Always - 6616 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 102 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART Error Log Version: 1 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: No Errors Logged Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART Self-test log structure revision number 1 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SMART Selective self-test log data structure revision number 1 Jan 9 10:29:57 Tower preclear_disk-finish[23928]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 1 0 0 Not_testing Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 2 0 0 Not_testing Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 3 0 0 Not_testing Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 4 0 0 Not_testing Jan 9 10:29:57 Tower preclear_disk-finish[23928]: 5 0 0 Not_testing Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Selective self-test flags (0x0): Jan 9 10:29:57 Tower preclear_disk-finish[23928]: After scanning selected spans, do NOT read-scan remainder of disk. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: If Selective self-test is pending on power-up, resume after 0 minute delay. Jan 9 10:29:57 Tower preclear_disk-finish[23928]: Jan 9 10:29:57 Tower preclear_disk-diff[23941]: ============================================================================ Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Disk /dev/sdf has been successfully precleared Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Ran 3 preclear-disk cycles Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Using :Read block size = 8225280 Bytes Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Last Cycle's Pre Read Time : 7:34:34 (73 MB/s) Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Last Cycle's Zeroing time : 10:32:46 (52 MB/s) Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Last Cycle's Post Read Time : 15:59:39 (34 MB/s) Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Last Cycle's Total Time : 34:08:05 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Total Elapsed Time 104:14:49 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Disk Start Temperature: 21C Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Current Disk Temperature: 22C, Jan 9 10:29:57 Tower preclear_disk-diff[23941]: == Jan 9 10:29:57 Tower preclear_disk-diff[23941]: ============================================================================ Jan 9 10:29:57 Tower preclear_disk-diff[23941]: S.M.A.R.T. error count differences detected after pre-clear Jan 9 10:29:57 Tower preclear_disk-diff[23941]: note, some 'raw' values may change, but not be an indication of a problem Jan 9 10:29:57 Tower preclear_disk-diff[23941]: 19,20c19,20 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < Offline data collection status: (0x80)^IOffline data collection activity Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < ^I^I^I^I^Iwas never started. Jan 9 10:29:57 Tower preclear_disk-diff[23941]: --- Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > Offline data collection status: (0x84)^IOffline data collection activity Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > ^I^I^I^I^Iwas suspended by an interrupting command from host. Jan 9 10:29:57 Tower preclear_disk-diff[23941]: 54c54 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: --- Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: 58c58 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: --- Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: 63c63 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 10 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: --- Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: 67c67 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: < 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: --- Jan 9 10:29:57 Tower preclear_disk-diff[23941]: > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Jan 9 10:29:57 Tower preclear_disk-diff[23941]: ============================================================================ Jan 9 10:29:57 Tower preclear_disk-diff[23941]: Jan 9 10:38:14 Tower kernel: mdcmd (37598): spindown 0 Jan 9 10:38:15 Tower kernel: mdcmd (37599): spindown 1

Just pre-cleared this drive 3 times can you please tell me if it looks good? I don't see any re-allocated or pending sectors but would like a 2nd opinion. syslog-2011-01-09.txt

thanks

I should be getting my WD 2TB EARS drive today and I want to pre clear the drive 3 times, would this be correct? cd /boot preclear_disk.sh /dev/sdf-3

My temps never go passed 33 with the stock fan board with 5 drives. I just ordered the new 120mm fan board to make it quieter.

Thank you

Smart repot is installed through unmenu right?

How do I find out what the threshold is and what are the normalized parameters?

Thanks Joe, I understand everything except the failing thing

Just precleared my 2TB WD EARS, can you verify it is OK, looks good to me. === START OF INFORMATION SECTION === Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Device Model: WDC WD20EARS-00MVWB0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Serial Number: WD-WMAZ20442120 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Firmware Version: 50.0AB50 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: User Capacity: 2,000,398,934,016 bytes Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Device is: Not in smartctl database [for details use: -P showall] Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ATA Version is: 8 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ATA Standard is: Exact ATA specification draft version not indicated Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Local Time is: Sun Aug 15 21:08:03 2010 EDT Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART support is: Available - device has SMART capability. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART support is: Enabled Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: === START OF READ SMART DATA SECTION === Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART overall-health self-assessment test result: PASSED Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: General SMART Values: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Offline data collection status: (0x84)^IOffline data collection activity Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Self-test execution status: ( 0)^IThe previous self-test routine completed Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^Iwithout error or no self-test has ever Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^Ibeen run. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Total time to complete Offline Aug 15 21:08:04 Tower preclear_disk-finish[15598]: data collection: ^I^I (38400) seconds. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Offline data collection Aug 15 21:08:04 Tower preclear_disk-finish[15598]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^IAuto Offline data collection on/off support. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISuspend Offline collection upon new Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^Icommand. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^IOffline surface scan supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISelf-test supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^IConveyance Self-test supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISelective Self-test supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART capabilities: (0x0003)^ISaves SMART data before entering Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^Ipower-saving mode. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISupports SMART auto save timer. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Error logging capability: (0x01)^IError logging supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^IGeneral Purpose Logging supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Short self-test routine Aug 15 21:08:04 Tower preclear_disk-finish[15598]: recommended polling time: ^I ( 2) minutes. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Extended self-test routine Aug 15 21:08:04 Tower preclear_disk-finish[15598]: recommended polling time: ^I ( 255) minutes. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Conveyance self-test routine Aug 15 21:08:04 Tower preclear_disk-finish[15598]: recommended polling time: ^I ( 5) minutes. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISCT Feature Control supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ^I^I^I^I^ISCT Data Table supported. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART Attributes Data Structure revision number: 16 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Vendor Specific SMART Attributes with Thresholds: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 3 Spin_Up_Time 0x0027 167 167 021 Pre-fail Always - 6633 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 66 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 127 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART Error Log Version: 1 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: No Errors Logged Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART Self-test log structure revision number 1 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SMART Selective self-test log data structure revision number 1 Aug 15 21:08:04 Tower preclear_disk-finish[15598]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 1 0 0 Not_testing Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 2 0 0 Not_testing Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 3 0 0 Not_testing Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 4 0 0 Not_testing Aug 15 21:08:04 Tower preclear_disk-finish[15598]: 5 0 0 Not_testing Aug 15 21:08:04 Tower preclear_disk-finish[15598]: Selective self-test flags (0x0): Aug 15 21:08:04 Tower preclear_disk-finish[15598]: After scanning selected spans, do NOT read-scan remainder of disk. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: If Selective self-test is pending on power-up, resume after 0 minute delay. Aug 15 21:08:04 Tower preclear_disk-finish[15598]: