HIGHFLIII

Alright so here is an update. My old RAM (in previous pictures) is the 2x16 G Skill Ripjaws DDR4-3600 with CL16-19-19-39. My new RAM is 2x16 Corsair Vengeance RGB PRO SL DDR4-3600 (idk CL) I started by unplugging one old stick from the PC and ran memtest. It identified over 80k errors on the stick that remained. I swapped the same slot with the previously unplugged stick and ran memtest. I got one error with the message "FAIL" being delivered. I took the new sticks and installed both of them in the old sticks place. I ran memtest again expecting a clean run but I'm only 20 minutes in and it is at 150k errors and growing. Is it common for new RAM to fail so easily? Is there a factor I am missing?

I'm not sure if this is THE problem but it is definitely a problem. Do yall think this could have caused the freezing I reported before? What causes this? My system is about a year old

ok I'll give it a try and report back. i turned on my NAS again and it has been performing its automatic parity check for an unclean shutdown but after i got back today, it is reported to have been down and unable to be connected through Unraid Connect. so, it sounds like it just failed. Once again, I will check doing your recommended methods and report back if it is all good

I was able to do that and now i have two logs. i hope this is the correct thing to post. syslog-previous syslog

Hey Unraid community, I am having a problem with my unraid operation. I currently have a set up involving many pathways between unraid and 2 external computers (one downloads and one converts with handbrake). I am trying to set up the systems to request through overseerr, download, manually convert, then move the file to a plex folder to play through any device. The problem I am encountering is the unrid system crashes or locks up (no display, no reaction, unraid connect says its connected but no GUI access). this results in having to unclean shutdown my unraid server and that is very scary especially when it is currently going through 50tb of parity check in a day or so and wont complete. i thought it was the network switch i use but it looks like the network connection either fails then reconnects OR maintains connection for other devices during the freeze of unraid. I am at a loss at why the whole system fails. i have logs i believe i did correctly of before and after the crash but I havent posted them because I think they have personal info. any ideas? Edit: i posted a PDF of my layout. I think it is great BUT if you have any tips or small changes, LMK. I dont have much coding experience so i may need a dumbed down version. Zenithicus Server Setup.pdf

If this is the solution, how did you remove the old docker image to replace it with a new one?

I am also wondering how long mine should last. Does it stop and say PASS? Should I just restart the system? It says it's been running for 62 hours and at the bottom it says pass complete yet the program still is running. It's on test 10 as well