Smaksum

Having Exact same error. Logs are the same

Looks like the New New Ram fixed it have rsynced 10 TiB to my other server in the last 6 hours, No errors in syslog and still up and running. looks like i have 2 sets of ram with a bad stick or the Motherboard doesn't like the GSkill FlareX any more after BIOS update. Going to have to put it in another board and beat it to death with memtest for a few days.

Now that it is part of the array it should not need formatting on restart. should just be in the array when you start it. If you mean Spin down delay 15 minutes then after no accessing of the drive for that time the Green dot will go grey and put the drive in a low power state, not sure if those states work on USB flash drives though. You can also click on the green dot and see if it goes grey.

Yes when you first add a Disk to the Array it needs to be formatted by unraid to initialize it, unless you importing in an existing array or pool

I have been having a weird issue where my new server completely locks up, no access to GUI or shares. so far i have. Ran memtest 8 x full test Passed Changed Ram anyway since i had spare Changed the NIC to another Mellonx ConnectX-3 (Known Good) disabled the Realtek NIC in Bios Completely reflashed and fresh installed a second time added to flash Uraid OS append initrd=/bzroot pcie_aspm=off to fix another error that was popping up in syslog And it was still locking up I have Changed Ram again from another system that I know is good and now have a remote logger running This was all I caught from the last log Sulaco Log 1.txt I will add more logs if it continues with the New New Ram Any Ideas? Model:Custom M/B:ASUSTeK COMPUTER INC. TUF B450M-PLUS GAMING Version Rev X.0x BIOS:American Megatrends Inc. Version 4401 Dated 09/04/2023 CPU:AMD Ryzen 7 2700X Eight-Core @ 3700 MHz HVM:Enabled IOMMU:Enabled Cache:L1 - Cache: 768 KiB, L2 - Cache: 4 MiB, L3 - Cache: 16 MiB Memory:16 GiB DDR4 (max. installable capacity 128 GiB) Network:eth0: 10000 Mbps, full duplex, mtu 1500 Kernel:Linux 6.1.74-Unraid x86_64 OpenSSL:1.1.1v

Thank you I'll give it a shot. I thought that should work just didn't want to try and somehow lose the data, its already going to take 24+ hours to move the data back.

Hello I currently have unraid setup with 4 zfs pools 1-4x2tb nvme zfs1 cache pool, 1- 2x1tb nvme zfs mirrored 1tb docker/vm pool, 1-8x8tb zfs2 backup pool, and 1-6x14tb zfs main pool. As I am running at 80% on my main pool I need to rebuild and expand it probably to a 10x14tb zfs3 but I'm out of drive bays on my case. I want to move my backup pool to another server then copy all the data back to my main storage. I'm wondering what files I have to copy off of the usb key to make this a simple move and startup on a new install.