jclaydon1969

I am missing something painfully obvious and I don't know what I am doing wrong. I had two 4 tb drives that I called "media_and_movies" configured as RAID 0. I recently bought an extra 4TB so I wanted to turn my pool into a raidz1. pool th So I formatted all my drives as zfs, clicked on the add pool, selected the three drives, then found the setting for zfs1 when i clicked on the main/first drive. After I clicked start.. My pool is listed as 4 TB.. not eight.. Can anyone tell me where I am going wrong and reccomend a good video for setup? edit: i don't know if it matters in this case, but I am using Raid 7.0 (the newest update_ tower-diagnostics-20250207-1622.zip

I recently bought a USB 2.5G adapter, which worked the first time I connected it via my switch. i was using my wireless internet connection. But as soon as I connected my windows 11 mini pc to the switch, the unraid server stopped working. So I went back to the orgiinal setup to try and edit the network settings and now nothing works no matter what I do, altho if I login via the cli, I can ping 1.1.1.1 when connnected to my usb-c nic. I tried using the graphic OS to change the settings back to bridged, whichis what it was when it was working, but all I get is a blank screen with a blinking cursor.. anyone know how i can restore the nework settings so that eth1(my usb nic) is the default? diagnostic.zip

tower-diagnostics-20240922-0911.zip I am at my wits end, I finally got my server stable thanks to the tip about changing the power state because of my AMD ryzen chipset, but I have been doing something consistently wrong and I have no idea what. When I get one docker or feature to work the way I want it to and I installl the next docker or VM, it will sometimes delete my ENTIRE configuration, and I have to try and start over.. The worst offender seems to be the dockers for Plex media server, when I first installed it, the transcoding worked flawlessly with my Nvidia Strix RTX 2060. I have tried starting over with a configuration that was working perfectly *had to transfer my license to a new USB* but when I added the hardware transcoding information back in I got this: This XML file does not appear to have any style information associated with it. The document tree is shown below. <MediaContainer size="25" allowCameraUpload="0" allowChannelAccess="1" allowMediaDeletion="1" allowSharing="1" allowSync="0" allowTuners="1" apiVersion="0.1.0" backgroundProcessing="1" companionProxy="1" countryCode="" diagnostics="logs,databases,streaminglogs" eventStream="1" friendlyName="Tower" hubSearch="1" itemClusters="1" livetv="7" machineIdentifier="f8ac14318d4da989865921467bc82713f73d51b4" mediaProviders="1" multiuser="1" musicAnalysis="2" myPlex="1" myPlexMappingState="mapped" myPlexSigninState="none" myPlexSubscription="0" ownerFeatures="06d14b9e-2af8-4c2b-a4a1-ea9d5c515824,1417df52-986e-4e4b-8dcd-3997fbc5c976,22b27e12-472e-4383-92ea-2ec3976d8e72,24b4cf36-b296-4002-86b7-f1adb657e76a,2ea0e464-ea4f-4be2-97c1-ce6ed4b377dd,300231e0-69aa-4dce-97f4-52d8c00e3e8c,34e182bd-2f62-4678-a9e9-d13b3e25019d,39dbdd84-8339-4736-96a1-0eb105cc2e08,3ae06d3a-a76b-435e-8cef-2d2008610ba2,3eb2789b-200c-4a15-91d2-dedfe560953c,3f6baa76-7488-479a-9e4f-49ff2c0d3711,4b522f91-ae89-4f62-af9c-76f44d8ef61c,547514ab-3284-46e5-af77-bbaff247e3fc,567033ef-ffee-44fb-8f90-f678077445f9,5d819d02-5d04-4116-8eec-f49def4e2d6f,5e2a89ec-fb26-4234-b66e-14d37f35dff2,64adaa4e-aa7e-457d-b385-51438216d7fe,65685ff8-4375-4e4c-a806-ec1f0b4a8b7f,68747f3a-ce13-46ce-9274-1e0544c9f500,6b85840c-d79d-40c2-8d8f-dfc0b7d26776,6c4d66d9-729d-49dc-b70d-ab2652abf15a,6d7be725-9a96-42c7-8af4-01e735138822,7b392594-6949-4736-9894-e57a9dfe4037,7f46bf17-fabf-4f96-99a2-cf374f6eed71,81c8d5fa-8d90-4833-aa10-a31a51310e2f,849433b0-ef60-4a71-9dd9-939bc01f5362,85ebfb7b-77fb-4afd-bb1a-2fe2fefdddbe,86da2200-58db-4d78-ba46-f146ba25906b,96cac76e-c5bc-4596-87eb-4fdfef9aaa11,9e93f8a8-7ccd-4d15-99fa-76a158027660,a3d2d5c4-46a0-436e-a2d6-80d26f32b369,abd37b14-706c-461f-8255-fa9563882af3,adaptive_bitrate,af291e9e-813f-4467-8779-5d215abc3b5f,b227c158-e062-4ff1-95d8-8ed11cecafb1,b2403ac6-4885-4971-8b96-59353fd87c72,b25b878c-4f60-4337-9f6b-2d97ef41d036,b46d16ae-cbd6-4226-8ee9-ab2b27e5dd42,b5874ecb-6610-47b2-8906-1b5a897acb02,b77e6744-c18d-415a-8e7c-7aac5d7a7750,bec2ba97-4b25-472b-9cfc-674f5c68c2ae,c36a6985-eee3-4400-a394-c5787fad15b5,c7ae6f8f-05e6-48bb-9024-c05c1dc3c43e,c9d9b7ee-fdd9-474e-b143-5039c04e9b9b,cb151c05-1943-408a-b37c-06f7d409d6bb,ce8f644e-87ce-4ba5-b165-fadd69778019,collections,d29f0ee0-3d3a-46c3-b582-4bc69bc17c29,dab501df-5d99-48ef-afc2-3e839e4ddc9a,de65add8-2782-4bb8-b156-e0b57a844479,e4a9fd6f-4105-476b-bc57-adccd009323b,f1ac7a53-c524-4311-9a27-713562fc24fa,f83450e2-759a-4de4-8b31-e4a163896d43,fec722a0-a6d4-4fbd-96dc-4ffb02b072c5,federated-auth,home,kevin-bacon,livetv,radio,tuner-sharing,unsupportedtuners" platform="Linux" platformVersion="6.1.79-Unraid (#1 SMP PREEMPT_DYNAMIC Fri Mar 29 13:34:03 PDT 2024)" pluginHost="1" pushNotifications="0" readOnlyLibraries="0" startState="startingPlugins" streamingBrainABRVersion="3" streamingBrainVersion="2" sync="1" transcoderActiveVideoSessions="0" transcoderAudio="1" transcoderLyrics="1" transcoderPhoto="1" transcoderSubtitles="1" transcoderVideo="1" transcoderVideoBitrates="64,96,208,320,720,1500,2000,3000,4000,8000,10000,12000,20000" transcoderVideoQualities="0,1,2,3,4,5,6,7,8,9,10,11,12" transcoderVideoResolutions="128,128,160,240,320,480,768,720,720,1080,1080,1080,1080" updatedAt="-1" updater="1" version="1.41.0.8992-8463ad060" voiceSearch="1"> <Directory count="1" key="actions" title="actions"/> <Directory count="1" key="activities" title="activities"/> <Directory count="1" key="butler" title="butler"/> <Directory count="1" key="channels" title="channels"/> <Directory count="1" key="clients" title="clients"/> <Directory count="1" key="devices" title="devices"/> <Directory count="1" key="diagnostics" title="diagnostics"/> <Directory count="1" key="downloadQueue" title="downloadQueue"/> <Directory count="1" key="hubs" title="hubs"/> <Directory count="3" key="library" title="library"/> <Directory count="3" key="livetv" title="livetv"/> <Directory count="3" key="media" title="media"/> <Directory count="1" key="neighborhood" title="neighborhood"/> <Directory count="1" key="playQueues" title="playQueues"/> <Directory count="1" key="playlists" title="playlists"/> <Directory count="1" key="resources" title="resources"/> <Directory count="1" key="search" title="search"/> <Directory count="1" key="server" title="server"/> <Directory count="1" key="servers" title="servers"/> <Directory count="1" key="service" title="service"/> <Directory count="1" key="statistics" title="statistics"/> <Directory count="1" key="system" title="system"/> <Directory count="1" key="transcode" title="transcode"/> <Directory count="1" key="updater" title="updater"/> <Directory count="1" key="user" title="user"/> </MediaContainer> I've gotten other XML errors too when I try to start over and re-install plex *The one i originally used was from a developer binhex but it won't install at all now for some reason* using the 'official' community app. At this point, I think I may have to just start from a fresh install, but I don't want to affect my license or transfer to yet another usb drive * i don't have any* If anyone has any suggestions, I'd be extremely grateful.

I'm having a hell of a time installing plex. When I get one feature working, another seems to stop working. I;ve had my docker containers disapppear, get errors like 1001 when trying to play my 4k movies.. I tried to start over from square one but I got this output: This XML file does not appear to have any style information associated with it. The document tree is shown below. <MediaContainer size="25" allowCameraUpload="0" allowChannelAccess="1" allowMediaDeletion="1" allowSharing="1" allowSync="0" allowTuners="1" apiVersion="0.1.0" backgroundProcessing="1" companionProxy="1" countryCode="" diagnostics="logs,databases,streaminglogs" eventStream="1" friendlyName="Tower" hubSearch="1" itemClusters="1" livetv="7" machineIdentifier="f8ac14318d4da989865921467bc82713f73d51b4" mediaProviders="1" multiuser="1" musicAnalysis="2" myPlex="1" myPlexMappingState="mapped" myPlexSigninState="none" myPlexSubscription="0" ownerFeatures="06d14b9e-2af8-4c2b-a4a1-ea9d5c515824,1417df52-986e-4e4b-8dcd-3997fbc5c976,22b27e12-472e-4383-92ea-2ec3976d8e72,24b4cf36-b296-4002-86b7-f1adb657e76a,2ea0e464-ea4f-4be2-97c1-ce6ed4b377dd,300231e0-69aa-4dce-97f4-52d8c00e3e8c,34e182bd-2f62-4678-a9e9-d13b3e25019d,39dbdd84-8339-4736-96a1-0eb105cc2e08,3ae06d3a-a76b-435e-8cef-2d2008610ba2,3eb2789b-200c-4a15-91d2-dedfe560953c,3f6baa76-7488-479a-9e4f-49ff2c0d3711,4b522f91-ae89-4f62-af9c-76f44d8ef61c,547514ab-3284-46e5-af77-bbaff247e3fc,567033ef-ffee-44fb-8f90-f678077445f9,5d819d02-5d04-4116-8eec-f49def4e2d6f,5e2a89ec-fb26-4234-b66e-14d37f35dff2,64adaa4e-aa7e-457d-b385-51438216d7fe,65685ff8-4375-4e4c-a806-ec1f0b4a8b7f,68747f3a-ce13-46ce-9274-1e0544c9f500,6b85840c-d79d-40c2-8d8f-dfc0b7d26776,6c4d66d9-729d-49dc-b70d-ab2652abf15a,6d7be725-9a96-42c7-8af4-01e735138822,7b392594-6949-4736-9894-e57a9dfe4037,7f46bf17-fabf-4f96-99a2-cf374f6eed71,81c8d5fa-8d90-4833-aa10-a31a51310e2f,849433b0-ef60-4a71-9dd9-939bc01f5362,85ebfb7b-77fb-4afd-bb1a-2fe2fefdddbe,86da2200-58db-4d78-ba46-f146ba25906b,96cac76e-c5bc-4596-87eb-4fdfef9aaa11,9e93f8a8-7ccd-4d15-99fa-76a158027660,a3d2d5c4-46a0-436e-a2d6-80d26f32b369,abd37b14-706c-461f-8255-fa9563882af3,adaptive_bitrate,af291e9e-813f-4467-8779-5d215abc3b5f,b227c158-e062-4ff1-95d8-8ed11cecafb1,b2403ac6-4885-4971-8b96-59353fd87c72,b25b878c-4f60-4337-9f6b-2d97ef41d036,b46d16ae-cbd6-4226-8ee9-ab2b27e5dd42,b5874ecb-6610-47b2-8906-1b5a897acb02,b77e6744-c18d-415a-8e7c-7aac5d7a7750,bec2ba97-4b25-472b-9cfc-674f5c68c2ae,c36a6985-eee3-4400-a394-c5787fad15b5,c7ae6f8f-05e6-48bb-9024-c05c1dc3c43e,c9d9b7ee-fdd9-474e-b143-5039c04e9b9b,cb151c05-1943-408a-b37c-06f7d409d6bb,ce8f644e-87ce-4ba5-b165-fadd69778019,collections,d29f0ee0-3d3a-46c3-b582-4bc69bc17c29,dab501df-5d99-48ef-afc2-3e839e4ddc9a,de65add8-2782-4bb8-b156-e0b57a844479,e4a9fd6f-4105-476b-bc57-adccd009323b,f1ac7a53-c524-4311-9a27-713562fc24fa,f83450e2-759a-4de4-8b31-e4a163896d43,fec722a0-a6d4-4fbd-96dc-4ffb02b072c5,federated-auth,home,kevin-bacon,livetv,radio,tuner-sharing,unsupportedtuners" platform="Linux" platformVersion="6.1.79-Unraid (#1 SMP PREEMPT_DYNAMIC Fri Mar 29 13:34:03 PDT 2024)" pluginHost="1" pushNotifications="0" readOnlyLibraries="0" startState="startingPlugins" streamingBrainABRVersion="3" streamingBrainVersion="2" sync="1" transcoderActiveVideoSessions="0" transcoderAudio="1" transcoderLyrics="1" transcoderPhoto="1" transcoderSubtitles="1" transcoderVideo="1" transcoderVideoBitrates="64,96,208,320,720,1500,2000,3000,4000,8000,10000,12000,20000" transcoderVideoQualities="0,1,2,3,4,5,6,7,8,9,10,11,12" transcoderVideoResolutions="128,128,160,240,320,480,768,720,720,1080,1080,1080,1080" updatedAt="-1" updater="1" version="1.41.0.8992-8463ad060" voiceSearch="1"> <Directory count="1" key="actions" title="actions"/> <Directory count="1" key="activities" title="activities"/> <Directory count="1" key="butler" title="butler"/> <Directory count="1" key="channels" title="channels"/> <Directory count="1" key="clients" title="clients"/> <Directory count="1" key="devices" title="devices"/> <Directory count="1" key="diagnostics" title="diagnostics"/> <Directory count="1" key="downloadQueue" title="downloadQueue"/> <Directory count="1" key="hubs" title="hubs"/> <Directory count="3" key="library" title="library"/> <Directory count="3" key="livetv" title="livetv"/> <Directory count="3" key="media" title="media"/> <Directory count="1" key="neighborhood" title="neighborhood"/> <Directory count="1" key="playQueues" title="playQueues"/> <Directory count="1" key="playlists" title="playlists"/> <Directory count="1" key="resources" title="resources"/> <Directory count="1" key="search" title="search"/> <Directory count="1" key="server" title="server"/> <Directory count="1" key="servers" title="servers"/> <Directory count="1" key="service" title="service"/> <Directory count="1" key="statistics" title="statistics"/> <Directory count="1" key="system" title="system"/> <Directory count="1" key="transcode" title="transcode"/> <Directory count="1" key="updater" title="updater"/> <Directory count="1" key="user" title="user"/> </MediaContainer>

i managed to find the settings thank you. I have also been having issues with my plex server, getting errors like 'file not found' 1102 which says it has something to do with transcoding and my docker files disappearing altogether. Could this mean that i have a failing drive?

I am using unraid version 6.13 with a AMD Ryzen 5 1600 Six-Core @ 3200 MHzr, a Strix B350F motherboard and 32G of ddr 4 ram. I don't know if its something in my setup but for some reason when I leave the server unattended or just don't use it for a while, it seems to reboot. Sometimes it will reboot immediately after turning it on. I have enclosed diagnostics. If anyone can tell me what I am doing wrong I would greatly appreciate it.tower-diagnostics-20240915-1235.zip

Sorry, I should have done that.. As it turns out, I managed to get it to work by setting a static ip address, which gave me gui access from windows, but not internet.. Was a typo in the server settings Now I just have to figure out how to restore my docker containers.. I had the backup appdata installed, but for some reason it's not reading the restored data.. *shrug* tower-diagnostics-20240910-0758.zip

I recently switched internet provider, and now my unraid server is not able to connect directly to the router like it did before after much back and forth and trial and error, i did manage to connect my computers by bridging the ethernet port of my windows 11 pc and using a second wireless adapter to share the internet. My server computer that normally uses unraid works under linux mint 21, but i can not access the web gui from the windows pc when unraid is running my old isp used numbers like 10.0.0.195 and this one uses 192.168.xx.xx here is a screen shot of linux: ifconfig enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.137.133 netmask 255.255.255.0 broadcast 192.168.137.255 inet6 fe80::f8e2:be5:272b:f205 prefixlen 64 scopeid 0x20<link> ether b0:6e:bf:bb:32:45 txqueuelen 1000 (Ethernet) RX packets 6227 bytes 5406272 (5.4 MB) RX errors 48 dropped 0 overruns 0 frame 48 TX packets 3816 bytes 755028 (755.0 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf6900000-f691ffff lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 988 bytes 130158 (130.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 988 bytes 130158 (130.1 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 here iss what is on my windows: C:\Users\jclay>ipconfig Windows IP Configuration Unknown adapter Tailscale: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::d8ff:5060:f230:9168%38 Autoconfiguration IPv4 Address. . : 169.254.83.107 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter Ethernet 2: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::ad01:1d1e:b776:bfa0%13 IPv4 Address. . . . . . . . . . . : 192.168.56.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Wireless LAN adapter Local Area Connection* 1: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Local Area Connection* 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter Ethernet: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::5253:3e3:790:56b0%17 IPv4 Address. . . . . . . . . . . : 192.168.137.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Wireless LAN adapter Wi-Fi: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:56a:75c7:1800:7d9:82:6450:e3a0 Temporary IPv6 Address. . . . . . : 2001:56a:75c7:1800:30bc:ee51:1e64:7b3f Link-local IPv6 Address . . . . . : fe80::9dd5:f4a:9a8:798c%19 IPv4 Address. . . . . . . . . . . : 192.168.1.77 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : fe80::fe2b:b2ff:feff:bc0%19 192.168.1.254 Wireless LAN adapter Wi-Fi 2: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:56a:75c7:1800:b7ef:2d90:a43b:7409 Temporary IPv6 Address. . . . . . : 2001:56a:75c7:1800:a855:2630:5f69:4c79 Link-local IPv6 Address . . . . . : fe80::2435:b802:94e0:96cc%10 IPv4 Address. . . . . . . . . . . : 192.168.1.81 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : fe80::fe2b:b2ff:feff:bc0%10 192.168.1.254 anyone have any ideas on what i'm missing?

It would be nice to select a zpool as the secondary storage option when using the mover to transfer. or maybe it exists and I'm just not understanding how it works..

Yes, as the picture shows it seems to recognize that it is there, but it's listed as offline for some reason..

Do you have any recommendations for someone who is just starting out with unraid.. I have read the documentation for the urbackup and I am still unable to get the webui to recognize my client server I installed on my windows 11 machine.

I had just managed to get my docker container of plex functioning flawlessly, then tried setting up the connect plugin and suddly the webgui won't load. m I am currently using 6.12.11 below is the log from the docker container 2024-08-15 09:09:38,716 INFO reaped unknown pid 8 (exit status 0) 2024-08-15 09:09:38,758 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 09:09:38,766 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22760543436880 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 09:09:38,766 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22760535514752 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 09:09:38,766 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 09:09:38,767 DEBG received SIGCHLD indicating a child quit 2024-08-15 09:09:39,771 INFO spawned: 'plexmediaserver' with pid 66 2024-08-15 09:09:39,824 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 09:09:39,832 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22760525961440 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 09:09:39,832 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22760525037392 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 09:09:39,832 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 09:09:39,833 DEBG received SIGCHLD indicating a child quit 2024-08-15 09:09:41,836 INFO spawned: 'plexmediaserver' with pid 71 2024-08-15 09:09:41,878 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 09:09:41,885 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22760525213776 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 09:09:41,885 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22760538368976 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 09:09:41,885 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 09:09:41,886 DEBG received SIGCHLD indicating a child quit 2024-08-15 09:09:44,894 INFO spawned: 'plexmediaserver' with pid 76 2024-08-15 09:09:44,941 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 09:09:44,947 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22760542520960 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 09:09:44,948 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22760525037392 for <Subprocess at 22760525251984 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 09:09:44,948 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 09:09:44,948 DEBG received SIGCHLD indicating a child quit 2024-08-15 09:09:45,950 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly 2024-08-15 09:10:50,032 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2024-08-15 10:10:27.743579 [info] Host is running unRAID 2024-08-15 10:10:27.774046 [info] System information Linux Tower 6.1.99-Unraid #1 SMP PREEMPT_DYNAMIC Tue Jul 16 10:06:03 PDT 2024 x86_64 GNU/Linux 2024-08-15 10:10:27.811642 [info] SHARED_NETWORK not defined (via -e SHARED_NETWORK), defaulting to 'no' 2024-08-15 10:10:27.846953 [info] PUID defined as '99' 2024-08-15 10:10:27.893493 [info] PGID defined as '100' 2024-08-15 10:10:27.953595 [info] UMASK defined as '000' 2024-08-15 10:10:27.986841 [info] Permissions already set for '/config' 2024-08-15 10:10:28.034345 [info] Deleting files in /tmp (non recursive)... 2024-08-15 10:10:28.085795 [info] TRANS_DIR defined as '/config/transcode' 2024-08-15 10:10:28.129480 [info] Starting Supervisor... 2024-08-15 10:10:28,514 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2024-08-15 10:10:28,514 INFO Set uid to user 0 succeeded 2024-08-15 10:10:28,518 INFO supervisord started with pid 7 2024-08-15 10:10:29,525 INFO spawned: 'plexmediaserver' with pid 61 2024-08-15 10:10:29,526 INFO reaped unknown pid 8 (exit status 0) 2024-08-15 10:10:29,884 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 10:10:29,891 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23338284038288 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 10:10:29,891 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23338295114400 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 10:10:29,891 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 10:10:29,892 DEBG received SIGCHLD indicating a child quit 2024-08-15 10:10:30,895 INFO spawned: 'plexmediaserver' with pid 66 2024-08-15 10:10:30,942 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 10:10:30,953 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23338284394752 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 10:10:30,954 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23338283217744 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 10:10:30,954 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 10:10:30,954 DEBG received SIGCHLD indicating a child quit 2024-08-15 10:10:32,961 INFO spawned: 'plexmediaserver' with pid 71 2024-08-15 10:10:33,004 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 10:10:33,011 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23338283277232 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 10:10:33,011 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23338295114400 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 10:10:33,011 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 10:10:33,012 DEBG received SIGCHLD indicating a child quit 2024-08-15 10:10:36,017 INFO spawned: 'plexmediaserver' with pid 76 2024-08-15 10:10:36,062 DEBG 'plexmediaserver' stderr output: PMS: failure detected. Read/write access is required for path: /config/Plex Media Server 2024-08-15 10:10:36,073 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23338283105936 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stdout)> 2024-08-15 10:10:36,073 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23338283217456 for <Subprocess at 23338293754624 with name plexmediaserver in state STARTING> (stderr)> 2024-08-15 10:10:36,073 WARN exited: plexmediaserver (exit status 1; not expected) 2024-08-15 10:10:36,073 DEBG received SIGCHLD indicating a child quit 2024-08-15 10:10:37,075 INFO gave up: plexmediaserver entered FATAL state, too many start retries Also included system log but it appears to be some kind of read/write error so probably not needed Anyone have any ideas one what I can do before deleting the contrainer and starting over? tower-diagnostics-20240815-1130.zip

so. I tired to pass thru my Nividia Geoforce Strix RTX 2060 6G card but I got the following error "internal error: qemu unexpectedly closed the monitor: 2024-07-25T03:41:29.055478Z qemu-system-x86_64: -device {"driver":"vfio-pci","host":"0000:08:00.0","id":"hostdev0","bus":"pci.0","addr":"0x6","romfile":"/mnt/cache/isos/Asus.RTX2060.rom"}: vfio 0000:08:00.0: group 17 is not viable Please ensure all devices within the iommu_group are bound to their vfio bus driver." After checking system harderware group 17 shows the following: " IOMMU group 17: [10de:1e89] 08:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2060] (rev a1) [10de:10f8] 08:00.1 Audio device: NVIDIA Corporation TU104 HD Audio Controller (rev a1) [10de:1ad8] 08:00.2 USB controller: NVIDIA Corporation TU104 USB 3.1 Host Controller (rev a1) Bus 005 Device 001 Port 5-0 ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001 Port 6-0 ID 1d6b:0003 Linux Foundation 3.0 root hub [10de:1ad9] 08:00.3 Serial bus controller: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1) " I didn't really understand it all that well, but I did look at the video that said something about having to edit the xml so that it points to the same device.. There are 3 devices listed here, do I need to do the same thing for the third device. Also I downloaded my Rom for my Strix Gepfprce RTX2060 but I couldn't find the section mentioned in the vide there's mp ,emtopm pf VGA amuwjere/ do I still need to edit this? using 6.12 with Ryzen 5 processor and a Strix B350F motherboard, I aso read something about some AMD hardware having issues.. Asus.RTX2060.rom

I'm currently using 6.12.11 but I've had this issue since I've installed 6.10. I'm using s Ryzen 5 proccessor with 32G of memory and a strix b350f motherboard.. It seems no matter what I'm doing on the server, as soon as the server goes to sleep, everything becomes unresponsive, including the webs gui, and nothing will wake it up. I've tried to send wake on lan packet, but that doesn't work and neither does pressing the power key.. is there any way I can keep the machine terminal active/always on? tower-diagnostics-20240724-0749.zip

no, I wanted one pool that basically takes my two 4TB drives and treats ist as a 8TB drive.. I was going to use a second 8TB drive i purchased as parity in the array..