Solarisfps

Yes it has worked since day 1 no issues using remote screen with kvm functions fine. IPMI unraid plugin works and reports the information from the ipmi.

Those messages have gone now, thank you

Apparently for my error this will fix it Hmm interesting i don't have any of those errors. It was suggested in the general support forum that i add this to my startup append initrd=/bzroot pcie_aspm=off This appears to have gotten rid of those errors for the time being also had an issue with the samsung 990 pro nvme which i believe flashing to the latest firmware will fix it randomly disappearing. Overall the board is working fine, just waiting for another set of 2x32gb ecc udimms to arrive. I only have 2gb internet coming in and still use a pcie 2.5gb nic in the very bottom slot. If i need 10gb which i probably won't ever need i can always swap them over. Only thing i haven't got to work is the BMC- Tprobe location as i would like to monitor the temps of 1 hdd and adjust fancurve in my case.

Thank you i have added it to my startup config and have restarted the server will monitor this

Anyone on arrow lake getting these errors in the syslog I'm using a w880 Asus Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: AER: Correctable error message received from 0000:00:06.1 Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: device [8086:7e

I keep getting these items appearing in red on my sys log Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: AER: Correctable error message received from 0000:00:06.1 Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) Nov 5 19:43:54 AdziUnraid kernel: pcieport 0000:00:06.1: device [8086:7eca] error status/mask=00000001/00002000

Thanks for this helped me out, managed to update my 9500-8i.

My 5060 keeps vanishing with the latest open source driver, i have disabled any power saving scripts from space invader one. Also my ups got disconnected and had to plug it in. I also disabled ASPM in the bios I am also on the latest bios Version 1802 - 2025/09/26 Not sure how to resolve this I thought disabling ASM would fix the issue, syslogs attached. Cpu is a core ultra 9 syslog.txt

Waiting for my w880 intel board to arrive returning the X870e Creator Asus board 9900x. My server keeps crashing have now had to disable c-states globally.

Seems like i was affected my this issue, just checking my ram on hirensboot cd through test mem5. After the hdd was sucessfully boot i left my server on last night and it had crashed. My monitor connected to the motherboard had a green screen. Will disable the lower c-states

Thanks ill try and find that setting in the bios. Currently rebuilding hdd so will do it after.

Hi, I have been having issues with my server. First i was running an asus ws680 motherboard with intel and it would randomly power down / reboot after a 6 hours into a state where the fans would run at 100% and it was doing nothing, unraid was completely gone and the the ipmi card would be unreachable. I tried various things such as remove my graphics card and still the issue persists. Syslogs would show near the bottom as it cant capture the issue when it immediately powers off. Fast forward, i change to the asus pro art x870e. I thought everything was fine but my unraid server because completely unaccesible and it doesn't sound like it is doing anything. It should be rebuilding a failed hard drive which you should hear hard drive activity. Everything is going wrong on this server and i really want to sort it out but i don't know what is run. During the time it crashed i was only running 1 docker container plex. syslog syslog-previous

Thanks for this i ended up on BTRFS as i missed a little box where the start button for the array was as it was complaining about no file structure something a long the lines of that, didn't notice it until i also saw the same message when trying BTRFS its up and running now.

So it is BTRFS that will allow mismatched drive sizes i am not too interested in redundancy as its just a cache downloading drive just wanted to maximise the space out of 1 pool.

Thanks for this I am currently stuck in limbo doing parity check so after that is completed ill take a look

From my understanding that you cannot add different size disks to a zfs pool. I already have the pool running how do I use the mismatch drives to form 1 6tb pool do i need to delete the pool and start again or is there a way of converting the pool from zfs to btrfs i am not concerned about the data as it is a cache drive.

So just to clarify the following should work if i change Saznbd directories. Saznbd will place incomplete download in a separate share Saznbd will move the download from incomplete share to completed folder in the main Data share Arr will pick up that there is a completed download and then move this to the appropriate directory such as 'Tv Shows' / Movies for example. Run mover overnight will move the files into the array The end result should mean that the array will only be touched when either the cache drive fills or mover is operating. Thanks for your help again.

Thanks, so if i create a share for incompletes that is cache drive only then this will only store the data on the cache drive. Once the file has been completed then this will go back into the completed folder in (DATA USENET) then the same result would happen again with the array be written to? I am assuming this hard linking automation cant avoid writes to the array unless i do everything manually correct (moving files myself?) from one share to another. Once my my large queue is completed then i won't have so much of a problem and my disks hopefully can start to spin down.

Thanks for your quick reply. Should i turn off secondary storage until I am ready to move files to the array then, is that a solution?

I moved over 7tb last night and now I am starting it up with a empty cache drive. If im not moving at the same time as downloading then why is this action happening for a file that has just finished now. Why does disk 2 need to be utilised when the file will be on the cache drive saznbd is the client and is moving it to completed category for arr client to pick it up. Jun 13 11:07:27 OPEN /mnt/disk2/data/usenet/incomplete/xxxxxxxxxxxxxxxxxxx

Hi, I cant figure out why my disks are keep getting utilised despite have a 8tb cache drive as the main primary source of storage. Whilst the downloader is running I am seeing file activity on a disk in the array, its very low writes but i don't think my drives should be touched, especially with docker running on its own ssd. I am using the trashguides <Data file structure with usenet as a subdirectory for downloads inside. I have uploaded some screenshots plus the diagnostic data adziunraid-diagnostics-20250613-1001.zip

Ah that makes perfect sense, must of forgotten to set that up. Mover is currently running so will have to wait to stop the array, to allow me to change this pool setting. I will put 200gb on the free space limit should be plenty to avoid this happening again.

Hi, thanks for replying and sorry for not uploading a diagnostic which i have done now. The single drive on the cache pool has 0 set to the minimum free space is this issue? adziunraid-diagnostics-20250602-1232.zip

I followed the trash guides and setup my main shares as 'Data' and the appropriate sub directories Downloads are being sent to the cache drive and then mover will work over night to send them into the array. However, I am acquiring 45tb of data which will completely fill up the cache drive. Secondary Storage is selected as Array but it doesn't seem to automatically write to the array when the drive gets filled. I have checked global share settings but don't really see an option.

Thank you very much for your help.