Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,442

  • Joined

  • Last visited

  • Days Won

    706

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Please use the existing plugin support thread.
  2. JorgeB
    Gigabyte boards are known to create HPA partitions by default. Also, you should change the SATA controller to AHCI/SATA and update Unraid to latest.
  3. JorgeB
    Unraid is only detecting 2GB of RAM, that's very little for v6, and possibly there's some issue with the server which looks like it has more RAM installed.
  4. JorgeB
    There was no need to disconnect, just unassign it, but disconnecting will accomplish the same.
  5. JorgeB
    There appears to be a problem with the cache filesystem, to confirm do this: If Docker/VM services are using the cache disable them, then unassign the cache device and start array.
  6. JorgeB
    The array shoudd be much faster, especially with just one data drive which makes work similar to a RAID1 array, two things you can test, copying directly to a disk share instead of user share, you can enable disk shares on settings -> global share settings, then copy to \\tower\disk1, another thing would be to add an SSD as cache, for either test do a standard SMB copy using Windows explorer, from a Windows 10 PC if possible.
  7. JorgeB
    Try to shutdown the server by typing "shutdown" on the console, if it doesn't after 5 minutes you'll need to force it.
  8. JorgeB
    The zip is on the logs folder of yoru flash drive, upload it here directly to the forum.
  9. JorgeB
    Feel free to ask for help if you have any doubts.
  10. JorgeB
    Loop2 is the docker image and it's corrupt, you need to re-create it, cache filesystem itself looks fine for now, there are a few old corruption errors but those should not increase anymore if the RAM problem was solved, you can see here to clear the errors and continue monitoring it.
  11. JorgeB
    If the disk dropped during the SMART test is likely bad, though make sure power is OK.
  12. JorgeB
    On the server console using your keyboard/monitor if you have one, alternatively using the terminal window/putty.
  13. JorgeB
    You just need to check the result, in doubt post the SMART report.
  14. JorgeB
    Not really, you should get reasonably consistent results close to line speed.
  15. JorgeB
    SMART test failed, so disk needs to be replaced.
  16. JorgeB
    Better, but when all is working good would should get close to line speed with iperf.
  17. JorgeB
    Best bet is to post this on the Nvidia plugin support thread.
  18. JorgeB
    Likely to get a faster response if you post on the nerdpack support thread.
  19. JorgeB
    Edit network.cfg on flash/config or just delete/rename it and a new one will be created.
  20. JorgeB
    Should be fine assuming it's genuine. Not easy to diagnose power issues with the logs, easiest way is just to try with a different PSU if available.
  21. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  22. JorgeB
    Please don't double post, continue discussion here:
  23. JorgeB
    Though SMART looks bad I would first confirm disk1 is really failing by running an extended SMART test.
  24. JorgeB
    Run a single stream iperf test to check network bandwidth.
  25. JorgeB
    After starting the array see if you get the diags on the console by typing "diagnostics"
×
×
  • Create New...