Flomaster

for some reason my GUI stopped loading. I couldn't get it to work unless I uninstalled Deluge and deleted the entire contents of the folder and re-installed it. I was able to download a file and then I lost connection to the server. from there it was all down hill. here is the log file after starting the app [info] Env var PUID defined as 99 [info] Env var PGID defined as 100 [info] Permissions already set for /config [info] Starting Supervisor... 2016-02-24 21:49:24,714 CRIT Set uid to user 0 2016-02-24 21:49:24,714 WARN Included extra file "/etc/supervisor/conf.d/deluge.conf" during parsing 2016-02-24 21:49:24,718 INFO supervisord started with pid 13 2016-02-24 21:49:25,723 INFO spawned: 'deluged' with pid 16 2016-02-24 21:49:25,732 INFO spawned: 'deluge-web' with pid 17 2016-02-24 21:49:26,733 INFO success: deluged entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-02-24 21:49:26,734 INFO success: deluge-web entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) [info] Env var PUID defined as 99 [info] Env var PGID defined as 100 [info] Setting permissions recursively on /config... [info] Starting Supervisor... 2016-02-24 22:07:47,834 CRIT Set uid to user 0 2016-02-24 22:07:47,844 WARN Included extra file "/etc/supervisor/conf.d/deluge.conf" during parsing 2016-02-24 22:07:47,854 INFO supervisord started with pid 15 2016-02-24 22:07:48,857 INFO spawned: 'deluged' with pid 18 2016-02-24 22:07:48,866 INFO spawned: 'deluge-web' with pid 19 2016-02-24 22:07:49,869 INFO success: deluged entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-02-24 22:07:49,870 INFO success: deluge-web entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) on another note, I can't get CouchPotato to connect to Deluge either I might need to comment in that thread instead. -=jason=- Edit: I deleted and re-installed again its working for the moment.

I'm almost certain this is what's happening. I remember the same thing happening to me when I rebooted when I was having an Internet outage. OT: congrats on the move to CA. Where abouts did you move to? I moved to Orange, in Orange County Just north of the Orange Mall Tapped via TapaCrap from my Galaxy Nexus Oh, nice area. Did you move there for work? Did you get a chance to try disabling the add-ons and test if it works? I Transferred for work. And yes reverting to a stock config file worked perfect. Tapped via TapaCrap from my Galaxy Nexus

I'm almost certain this is what's happening. I remember the same thing happening to me when I rebooted when I was having an Internet outage. OT: congrats on the move to CA. Where abouts did you move to? I moved to Orange, in Orange County Just north of the Orange Mall Tapped via TapaCrap from my Galaxy Nexus

ok, i'll try disabling the add-ons until I get internet turned on. -=Jason=-

so in Texas all was well and working just fine. I hooked up the server here in CA to the network(no internet) just local hub and wifi router. and I get stuck on starting up. I removed the case and double checked all cables were plugged in correctly and it still won't start up. its been so long since i've tinkered with this machine i seem to have forgotten how to do anything other than log into the main web GUI which still works by the way. -=Jason=- syslog-2013-06-30.txt

it worked just as you described. now will this command need to be ran after every reboot? do I need to add to my go script? -=Jason=-

Joe to the once again Thank you

just typing in the ip of the server doesn't work for me 192.168.2.10 = page can't be displayed. shoot I guess I should have started with a clean install as it could be a number of things not working. I guess I'll revert back to 4.7 for now. -=Jason=-

I just upgraded from 4.7 to 5.0 Rc3 and I can't access my tower.. I have NEVER been able to get to it via //tower or the likes I have always used my 192.168.2.10/main/htm and it worked just fine. my cache drive isn't mounted or assigned as cache so thats what I need to fix. any help would be much appreciated Pastebin of log : http://pastebin.com/cMqMpnzE -=Jason=- syslog-2012-06-03_1.txt

It's been a while since I have fiddled with my unRaid server. I might have had a setting in the purchase script to set it at 4K alignment. I'll wait and see what the guru's say. All my other drives are Wd20Ears green drives with jumpers on them edit: as noted in the first post not using an -a or -A will use the unraid default settings on //tower I have mine set at MBR-4K-aligned and preclear will use those settings if you are running 4.7 or higher. so I think I am in the clear and can assign my drive to the array.

here is my preclear on a Seagate Barracuda 2TB 7200 RPM drive. I only ran one pass and didn't use a -a or a -A I am running the 4.7 version of unraid. The results look good, but I was wondering if I need to run it again with an -A or -a or put it into service http://pastebin.com/A12P3Ciu -=Jason=- preclear.txt

awesome.. I just bought one and its preclearing now.. I went into the store and picked it up for $99. I now have Six drives plugged into my mobo and need a card to add more drives. -=Jason=-

I believe that error says some thing about your que not being empty, does it not? if your que is empty and no downloads in progress I have no idea -=Jason=-

awesome.... this fixed my problem as well. -=Jason=-

OMG..... I am a freaking dumb ass.... so I added a new completion command to SAbnzbd so when i download a "KidsMovies" it goes into a separate folder it should have been going to /mnt/cache/.Downloads/Complete/KidsMovies well it fat fingered the location to be /mnt/cache.Downloads/Complete/KidsMovies if you notice this was creating a new directory in /mnt and trying to unrar 4Gigs worth of a movie. now every time I sart SABnzbd it tried to unpack this file which I can't see to locate once memory gets full and starts killing off everything. seems like I need to start Sabnzbd and quickly kill the unpacking process. -=Jason=-