reggierat

for some reason my speedtest results never go above 25-26Mb/s when my internet is definitely 100+. Sab usually sits at 13.5MB/s

To be honest I'm not sure. What I would do is either. 1. Clean config or 2. Install this alongside the gfjardim version and use a different container name, ports and appdata. Then examine the appdata and compare what data is within. With some containers it is easy to see what needs to go where so to speak. With others, not so easy. Fair enough, i suppose clean config is easy enough, was just hoping it could be even easier I won't answer the other 2 threads

I'm currently running gfjardim's syncthing and was wondering if the config files and database are compatible with this. I have a few remaining dockers i would like to finally get moved over linuxserver

I'm currently running Needo's Couchpotato and was wondering if the config files and database are compatible with this. I have a few remaining dockers i would like to finally get moved over linuxserver

I'm currently running Needo's nzbdrone and was wondering if the config files and database are compatible with this. I have a few remaining dockers i would like to finally get moved over linuxserver

Solution on previous page, its a known issue and there is a work around

diagnostics with syslog is attached. Please advise what other troubleshooting i can maybe do? thx Neo_x This is a known issue and won't be addressed in the short-term as it is a result of the way limetech polls drive spun up/spun down status. Basically the status is becoming out of sync when the server wakes up. Work around in this thread http://lime-technology.com/forum/index.php?topic=39355.msg372872#msg372872 basically add a post wake up command to either spin up or spin down all drives and this will work correctly.

I did once upon a time when my music was spread across a couple of disks, that mistake has been corrected and now see no need for them

that's done the trick! thank you very much for your help

much better thank you! except it failed in windows whilst looking for a driver

Appreciate the detailed thread Arched and was hoping for a little help. Attempting to passthrough the USB 3.0 controller on my ASRock - B75 Pro3-M. Output of lspci | grep USB 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) Bus 004 Bus 004 Bus 003 - Lexar Bus 003 Bus 003 Bus 002 Bus 001 - Bus my device is listed on output of readlink command ../../../devices/pci0000:00/00000:00:14.0/usb1 i have run /usr/local/sbin/vfio-bind 0000:00:14.0 and confirm Bus 001 no longer appears if i run lsusb (have not added to go file yet, waiting to confirm it is working fine first) copy of XML <domain type='kvm'> <name>rTorrent</name> <uuid>a8d7f9a9-59a3-91a3-1ee0-19de892dd49f</uuid> <description>Torrent + VPN</description> <metadata> <vmtemplate name="Custom" icon="windows7.png" os="windows7"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>1</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='1' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/cache/appdata/virtual-machines/ruTorrent/vdisk1.qcow2'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:56:90:1b'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/rTorrent.org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='vmvga' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=00:14.0,bus=root.1,addr=00.1'/> </qemu:commandline> </domain> have tried addr=00.0 as well when starting VM i get the following error Error: internal error: early end of file from monitor: possible problem: 2015-07-29T19:38:56.073222Z qemu-system-x86_64: -device vfio-pci,host=00:14.0,bus=root.1,addr=00.1: Bus 'root.1' not found

I'm using for disknum in 0 `ls /dev/md* | sed "sX/dev/mdXX"`; do /root/mdcmd spindown $disknum; done on wake up to reset drive status on wake, otherwise sleep does not work for me, been like this since halfway through Beta cycle. Was previously using spinup but either works to get sleep functioning like normal after waking

Correct, workaround will spin up all drives after wake. After you manually spin all drives up be sure to let it sleep on its own and it will be fine

This is a known issue and won't be getting fixed, workaround here. http://lime-technology.com/forum/index.php?topic=39355.0

Is there any format the post sleep commands should take, I have tried to add a command to spin up all drives after waking as a bandaid for the bug I'm experiencing but it doesn't seem to run the command. Looking in syslog it doesn't look like post run commands are being run http://lime-technology.com/forum/index.php?topic=39355.0

I'm just confused by the behavior I'm seeing, a disk spun down in the GUI is preventing sleep from occurring due to disk activity. The only clue I have is that it is still reporting temperature

how does s3_sleep determine disk activity? the reason im curious is that i'm experiencing an issue where if all my drives are spun down but anyone of them are still reporting a temperature reading in the GUI then the log for s3_sleep is reporting disk activity for that drive, as far as i can tell there is no actual disk activity since the drive is spun down. to resolve the issue i have to spin up the affected drive manually and then once it spins down again it will stop reporting temperature. http://lime-technology.com/forum/index.php?topic=39355.0 http://lime-technology.com/forum/index.php?topic=39145.0

I will reboot my server tomorrow and confirm which settings I am using. After ditching the realtek Nic it's been working flawlessly.

I'm having the same issue, i have three repo's and none of the templates are loading, reported in the beta14 thread

I have a look. I just noticed the updated s3_sleep plugin, I can confirm that this resolves my issue with excluded/included disks on startup. Thank you!

i'm having an issue with the s3 sleep plugin, whereby on boot the included/excluded disks are not being set correctly. Once the server has booted i have to go into the s3 sleep settings page and toggled, excluded "yes, except cache" off and then back on again to have the disk settings set correctly. Some information is included http://lime-technology.com/forum/index.php?topic=37598.0 along with a seperate issue i'm having

I experienced the same issue of having the GUI broken upon first update to beta12. I fixed it by reinstalling b12 from scratch and then reinstalling plugins and following the instructions for making the sleep button appear.