jbrodriguez

Thanks for the reminder. I'll need to do a deep dive on this one. I'll probably have to do some redirecting from within the plugin(s) myself, I think.

I think it's because you don't have a password set.

I've just made a change to the ControlR plugin that I'll replicate to unBALANCE. When SSL is set to auto, the plugin will listen on http, so there shouldn't be more issues like recently. It'll be up soon.

v2018.07.07 (2.11.0) is available 2018-07-07 - 2.11.0 - Modify logic to set listening port READ IMPORTANT NOTICE This release changes the way the plugin decides whether to listen on http or https: (assuming a certificate is present, either letsencrypt or unraid self-signed) If the SSL setting in your unRAID is set to 'yes' -> plugin listens on https 'auto' -> plugin listens on http 'no' -> plugin listens on http Previously, with 'auto' the plugin would listen on https. In terms of the ControlR app, please read

I've just updated the ControlR PLUGIN (v2018.07.07, 2.11.0), to modify how it decides which protocol (http/https) to listen on. So, in terms of the ControlR iOS/Android app, note the following: If the SSL setting in your unRAID is set to 'yes' -> Add the server via ip/hostname, https port, secure switch on 'auto' -> Add the server via ip/hostname, http port, secure switch off 'no' -> Add the server via ip/hostname, http port, secure switch off Let me know about any issues.

Hi, I'm not good at kernel dumps, but does look like some issue with your network card (since the e1000 driver is listed) ? In any case, the connection timeout indicates the browser (your client) can't reach the server. Have you tried the console directly ?

Hi were you able to fix this ? Access the page via https rather than http. Also, add the server (in the app), using the ip:port:secure switched on. Let me know how it goes

maybe, I'll eventually do it, altought it's not really an issue :)

Yes, there are more details here

M4ST3R-OWNER, Do use the plugin jonathanm suggested for appdata. I think I'll eventually add some warnings or so, when appdata or similar are included in the source folders to move/copy.

I'll do some checks on my test system, maybe ipv6 has been selected as priority ? I'll take a look.

I haven't considered it until now. I'll eventually look into it.

Hi, I'm not sure what you're reporting. I looked at the log you pm'd me, saw you did a scatter/move (successful), then you replayed it (?, not sure why), but it didn't have any overall effect (source files were already removed, dest files were already in place). The log line you sent is ok, it means there were no issues with owner/group/folder/file permissions (thus the 0). What do you mean about your appdata folder ?

Hi georgez, So far, I haven't found a way to bind to both and I'm guessing it prefers ipv6 to ipv4. I think I found a solution so that it binds to ipv4, but it requires a fix from a third-party library, so ETA for resolution is unknown. I'm curious ... does it not work at all with ipv6 ?

v4.2.0 is available on App Store / Play Store ! This is a maintenance release to fix issues when adding servers. This release just brings to the Play / App Store the fix for the issue when adding servers. No additional change was made. Thanks for the confirmation WonderfulSlipperyThing.

Awesome !

v4.1.1 is available as an over-the-air (OTA) update ! 4.1.1 - Fix issues when adding servers This is small change to address the issue when adding servers. Look for the red badge on the settings icon, go the settings page and follow instructions (restart the app basically). Glad to know it's working GilbN. Please try it normally, and yes timeout 1 was really low (it's in milliseconds). @WonderfulSlipperyThing let me know if this works for you as well.

GlibN/WonderfulSlipperyThing, Could you set SSL to 'no' and try adding the server via ip, port 80, secure unchecked ? I'd like to make sure it's an ssl/https issue.

Thanks ! One of those 2 should have worked (ip vs fqdn). I'll add another iOS flag (which I should have added anyway) and do some testing to publish an updated app.

Thanks GilbN ! One last test and sorry for the inconvenience ... can you add the server using the fqdn (xxxxx.unraid.net), 443, secure checked (from within your lan) ? Please leave debug on to check the possible error. P.S.: Also, what iOS version are you using ?

Ok, try this next - Go to Settings > Credits - After the react native credits, you’ll find a debug button, hit it once (counter should read 1) - Now try connecting manually (you should see a ‘debug initialized ‘ message at the bottom) - It should go back to the main screen - Go to manual add again - It should be displaying some debug message - Take a screenshot and send it over (pm if you prefer) Also, by any chance, in the hostname, you're not entering the https:// prefix right ?

Ok. Your unRAID webgui runs on port 443 right ?

Hi, I'm assuming your server is on https. Could you try hostname: ip address port: 443 secure: checked Please try that from both outside (openvpn) and inside your lan, just to troubleshoot. Also, could you send me /boot/logs/controlr.log (it's the plugin log) ?

v4.1.0 is available on App Store / Play Store ! This is a maintenance release to update internal libraries that improve user privacy. Specifically, this updates Fabric modules Crashlytics and Answers to their latest versions, which are GDPR ready. I've updated the app's privacy policy and the app's website as well. For the time being, I won't be adding opt-in/opt-out settings, instead purchase/usage of the app will be interpreted as consent to the privacy policy. If you don't accept the privacy policy, please don't purchase or uninstall the app. As per usual, feedback will be welcome.

Is it possible it is the other way around ? The plugin listening on ipv4 rather than ipv6 ? I haven't taken any measures to support ipv6, haven't checked if it will work out of the box.