bally12345
-
Posts
667 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by bally12345
-
-
On 12/5/2022 at 7:30 AM, bthoven said:
As eventually I want to run it headless on Unraid server, the only way to get the Google authorized token is by installing gphotos-sync app on my Windows (or Linex/Mac) first, and then follow the whole process on Windows until I get the similar link as above. Now clicking the link on Windows can complete the authorization process and a token was created inside my Windows storage folder. I then copied the token file to my Unraid GooglePhotosSync storage folder (the folder where all the photos will be downloaded to). It's now working.
I am having exact issue by the looks of it, had to run virtual python instance and change execution policy but finally got to
The authentication flow has completed. You may close this window.
But when I go back to unraid and run gphotos-sync /storage I still get need to authorise
Where does .gphotos.token go? In the Unraid app data folder? I currently have it in same folder of client_secret.json -
Hi All, I am trying to setup gphotos-sync but seem to come across this error. I believe I have setup oauth correctly but think its to do with the consent screen.
Update. Published app after clicking the link and authorising it tries to go to localhost:8080
-
All sorted
Server: Notice [SERVER] - Parity-Sync finished (0 errors) Duration: 1 day, 7 hours, 7 minutes, 46 seconds. Average speed: 107.1 MB/s
Will RMA that other drive.
- 1
-
Popped another new 12tb hdd in and going to send other one back.
Parity build will take day and half so will update on Friday.
Sent from my SM-G991B using Tapatalk -
Parity finished last night. Server shut down for now.
Need to go into office today so will not be able to do anything now until tonight or tomorrow!
Atleast il save some money on electricity [emoji23]
Sent from my SM-G991B using Tapatalk -
Looks like the drive has dropped offline altogether. Got a feeling its faulty drive. Iv ordered another drive from amazon so will wait for parity to complete before stopping array. From previous attempts when using as disk4, pretty sure at stopping array it will show as not there and after reboot it will show up as unassigned disk.
Parity build is only 12.3% at moment
-
Should I cancel parity as it says its still running before running extended smart?Run extended SMART self-test on parity2 (Q).
You can unassign parity2 (Q) from the array if you want. Parity (P) is still valid no need to rebuild it.
Also hdd from wd my book wouldn't be an issue? Never had issue with shucked drives before.
Sent from my SM-G991B using Tapatalk
-
I can order another 12tb drive right now from amazon and have it tomorrow afternoon but assuming will need to create new config anyway?
Sent from my SM-G991B using Tapatalk -
Just got worrying notification!
Unraid Parity 2 error: 16-01-2023 21:11
Alert [sERVER] - Parity 2 in error state (disk dsbl)
WDC_WD120EDAZ-11F3RA0_2AHLUH3Y (sdl)
This is the same 12tb disk which was assigned as disk4 and moved to different bay.
I think it is best to remove to disk. Go back to 1 parity. Disk4 has already been removed.
What should I do?
Stop parity
Stop array
Remove parity 2
Create new config (preserve all)
Start array
Start parity rebuild with the original parity drive?server-diagnostics-20230116-2113.zip
Sent from my SM-G991B using Tapatalk -
44 minutes ago, itimpi said:
That will not work as Unraid will still think you have a drive in the position of the 'removed' drive.
The process to follow is documented here in the online documentation.
Thanks that's all started
Unraid Parity disk message: 16-01-2023 16:04 Notice [SERVER] - Parity disk, parity-sync in progress WDC_WD120EFAX-68UNTN0_8CKD5M3E (sdf) Unraid Parity 2 message: 16-01-2023 16:04 Notice [SERVER] - Parity 2, is being reconstructed and is available for normal operation WDC_WD120EDAZ-11F3RA0_2AHLUH3Y (sdl) Unraid Parity-Sync: 16-01-2023 16:04 Notice [SERVER] - Parity-Sync started Size: 12.0 TB
As im out of drive bays I will next swap another 4tb drive with another 12tb but glad I know have dual parity or will have once this has completed
-
Remove original disk.Do you know how to do this?
Start array.
Stop array.
Assign disk to parity
Start array?
Sent from my SM-G991B using Tapatalk
-
Reseated all the connections and took all the caddies out and put them back.
Seeing as I already moved files off disk4. I might as well set that to no disk and assign it to dual parity. Then I will have 2x12tb disks for parity.
When it comes to replacing another 4tb disk in future i will add another 12tb drive.
Anything I need to know before doing this other than I reduce my array size?
Sent from my SM-G991B using Tapatalk -
Stopped the array and that disk is no longer available in main tab to select. Think it has dropped off.
I will open it all up and check all the connections.
Sent from my SM-G991B using Tapatalk -
Will have to shut it down and check as no ipmi connected... But using a lsi card in it mode.
I think best thing to do is shut server down and check all the connections.
Sent from my SM-G991B using Tapatalk -
I wonder if all this time it was connection issue and not drive error. Not been inside the case just got 12 bays at front in cages
Diagnostic attached server-diagnostics-20230115-2225.zip
Also think all drives are automatically set to xfs
Sent from my SM-G991B using Tapatalk
-
The replacement 12tb for disk4 got to 90.3% and errored
Unraid Disk 4 error: 15-01-2023 21:05
Alert [sERVER] - Disk 4 in error state (disk dsbl)
WDC_WD120EDAZ-11F3RA0_2AHLUH3Y (sdp)
This is a brand new drive... Guessing RMA is in order? The disk has been disabled what should I do next.?
Sent from my SM-G991B using Tapatalk -
No problem, that's fine as the files are backed up on another disk just incase. Will wait for rebuild to complete.Parity has no concept of files - just of disk sectors. It therefore does not know that there are no files so will rebuild the sectors it thinks should be there - even if they correspond to an empty file system.
Thanks
Sent from my SM-G991B using Tapatalk
-
Removed from UD and formatted, assigned disk and started array. Rebuilding has started but confused because there shouldn't be anything on disk4 as I moved everything off before removing from array.
Can't remember if this is normal.
Server: Notice [sERVER] - Disk 4, is being reconstructed and is available for normal operation
WDC_WD120EDAZ-11F3RA0_2AHLUH3Y (sdp)
Sent from my SM-G991B using Tapatalk -
Really confused, added 12tb and it's showing unassigned dirve and not allowing to add to array?
Sent from my SM-G991B using Tapatalk -
DIsk4 (4TB) in my array has started showing reads errors and I have started moving the data off to another drive that has space so I can replace it with a 12TB drive.
Just want to know whether the drive is ready to be trashed or can it still safely be used but not in my array? Smart report attached
WDC_WD40EFRX-68WT0N0_WD-WCC4E1DNXP34-20230112-1817.txt
Could this be re-used for another purpose such as a bitcoin node? -
Any recommendation for a motherboard to go with? This wont work will a server board would it? I have a spare 2u chassis that I want to upgrade internals and migrate from my dual x5690 setup.
-
Excellent, there's a deal on 14TB drive which means it cheaper than 12tb! So will get the 14TB and add it as second parity
-
Hi All,
Just have a quick question regarding dual parity... I currently have single 12TB parity drive if I wanted to added 2nd parity does it have to be 12tb or can I add a 14tb drive?
The largest disk in my array is 12tb. So both parity drives will be equal or larger just not sure if they have to the same size?
-
I think I have come up with plan to start moving some data and freeing up a disk slot. For now I am moving stuff away from a 4TB to add the 12TB I have. Will then move all data from disk1 which has been running for about 7-8 years without issue to the new 12TB.
Then order a another 12TB to replace disk1 and then assign that as parity2!
After all that is all done I still need to decide if I should move away from the dual X5690 setup or Ryzen?
[support] rix's Docker Repository
in Docker Containers
Posted
Silly me... Moved token to Storage folder and it now works. Was definitely long winded having to run python on Windows to get it work as a work around but it did work.
Could someone help with a user bash script that can run once week?
Sent from my SM-G991B using Tapatalk