chvb

thanks for your answer. Yes. I have done this. but also no success.

Hello together, i've got a problem with my GPU passthrough to my Windows 10 VM. My Hardware is a HP Proliant ML310e. My Graphics Card is a Nvidia 750 with 2048MB RAM. I can use only one PCIe Slot for this Card. My Bios is the Version J04 11/09/2013. (newest) I've read so much in this Forum and tested so much with PCIe ACS Override and the syslinux.cfg This is the error Code when i try to start the VM with the Nvidia 750 GPU: internal error: process exited while connecting to monitor: 2016-04-25T09:04:53.998337Z qemu-system-x86_64: -device vfio-pci,host=05:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: vfio: error, group 1 is not viable, please ensure all devices within the iommu_group are bound to their vfio bus driver. 2016-04-25T09:04:53.998362Z qemu-system-x86_64: -device vfio-pci,host=05:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: vfio: failed to get group 1 2016-04-25T09:04:53.998369Z qemu-system-x86_64: -device vfio-pci,host=05:00.0,id=hostdev0,x-vga=on,bus=pci.2,addr=0x4: Device initialization failed I'm using this in the syslinux.cfg: append intel_iommu=on vfio_iommu_type1.allow_unsafe_interrupts=1 pcie_acs_override=downstream initrd=/bzroot Also tested PCIe ACS Override enabled/disabled. My onboard Graphic Card is enabled. So the Console from Unraid goes to this Adapter. The GPU is shown under devices. 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107 [GeForce GTX 750] [10de:1381] (rev a2) 05:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1) no other devices are using the Group of 05:00.0 and 05:00.1 when i use PCIe ACS Override enabled. What can i try? Many thanks.

Hey, thanks for this Information. I'm using Emby. The same thing here. Maybe you can change the Topic: Plex/Emby: Guide to Moving Transcoding to RAM Many thanks

+1 iSCSI feature for the cache pool would be so nice

Hey saarg, thanks for the Update. The Stable Version 4.0.9 working fine for me with Digital Devices Tuners.

Hey, i'm working on a Kerio Connect Docker. The docker is working fine. https://github.com/chvb/docker-kerio-connect https://hub.docker.com/r/chvb/docker-kerio-connect/ I've got the problem that when i edit the Docker, every configs are away. So i have to transfer them to the Unraid disk/cache. How can i do this. i would like to transfer the folder /opt/kerio/Mailserver to /config dir. Many thanks.

Openelec V6.1.7 MediaBuild working fine. Many thanks!

thanks for the Update. Its working fine for me.

The 6.1.6 Openelec Media Files working fine. Thank you.

Hey guys, i've found the solution on my HP ML310e Unraid Server. I've connected the 2 Samsung SSD Pro 1TB to the Onboard Controller. The Onboard Controller has two 6G Ports. The other WD RED HDDs are connected to the LSI Controller with IT firmware. Now it looks that everything works fine. Thank you.

I use 2 of the Samsung SSD 850 Pro 1TB.

ok, now with poll_attributes =180

i've copy a big file to one of the ssd. I touched the ssd. The ssd is cold. The speed is low.

hey guys, now i've checked some things. First i've disabled one of the cache ssd's. Then i have converted the other SSD to the XFS Filesystem. The result is the same. Low write speeds. After that i tested a WF green 1,5TB as the cache drive with the XFS file System. The result is great. Full Gigabit file transfers. See the attachment. What are the Problems with the samsung SSD Pro? Thanks and nice greetings

here the diagnostic file. Download

thank you for your answer. When i copy to the unraid array (not to the cache pool) i've got write speeds around 16mb/s. I don't know wheres the Problem.

Hello together, my Unraid Server has very Slow Write Speeds. When i copy a file to my Cache drive bond it start's with 120mb/s. After seconds it is only by 20mb/s. The Unraid System is very slow (Webinterface) at the copy process. Does anybody know the reason? Thanks.

thank you very much. The Openelec Media Files are working.

Thanks for the update

Thanks for your reply. Yes you're right. It's a Marvell chip. For me it is not the solution to deactivate the VT-d feature. I'm using the virtualisation of the Unraid server as well. I've bought a Adaptec 8 Port RAID CONTROLLER ASA-6805H. I hope that with this controller everything will work!

The Boot to the unraid console + webgui isn't the problem. I've connected to the HP Server console and taken these screenshots with the sata link speed errors. I've tested other pci-e lanes and another HDD and another Sas Cable. The same Problems here.

Hello together, I have a problem with my HP ML310e Server and the Startech PEXSAT34SFF Controller. When i make a restart of the maschine i have do disconnect my HDDs on the Startech controller. The other HDDs on the onboard controller are working fine. When the unraid maschine is bootet i connect the HDDs to the Startech controller again and everything is working fine. When I make a reboot and don't disconnect the HDDs to the Startech Controller the Unraid maschine doesn't find any HDDs on this Controller after reboot. Has somebody any Idea? Many Thanks.

I agree. Many thanks.

thank you. The V6.1.2 Media builds working like a charm.

6.1.1 Media Build workings fine for me. Thank you again!