Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by dstark4

  1. I haven't had an opportunity to use the restore yet, but am glad to say that the docker is working for me. Any chance that we can have the ability to change the docker from host to it's own IP? I have a server I would like to use this on, however it suffers from a bug that cause the entire host to become unresponsive at random if dockers are on the same vlan as the host.
  2. Updated, Reinstalled the docker with config pointed to cache. Still have the same problem of the appdata missing the majority of files. If this caused by the sqlite bug, I can wait until the limetech team has a fix. Thanks for the help
  3. Yes, 6.7.0. Hadn't moved to newest version as I haven't had any problems. Will upgrade to 6.7.2 and retry just in case.
  4. Correct, there are folders however of the four folders within the folder only the config folder has anything and it is one file. The urbackupsrv. Would I be correct in assuming that there should be more files?
  5. Sorry, I should have specified that the screenshot was from after deleting the folder from appdata, but before reinstalling the image. The folder was created when I hit apply. I did however go ahead and run the command. ~# ls -al /mnt/user/appdata/ total 16 drwxrwxrwx 1 nobody users 202 Aug 1 10:06 ./ drwxrwxrwx 1 nobody users 52 Jul 31 15:16 ../ drwxrwxrwx 1 nobody users 62 Dec 1 2018 MakeMKV/ drwxrwxrwx 1 nobody users 20 Dec 1 2018 PlexMediaServer/ drwxrwxrwx 1 nobody users 12 Dec 13 2018 QDirStat/ drwxrwxrwx 1 root root 22 Jul 28 13:28 Shinobi/ drwxrwxrwx 1 nobody users 96 Dec 31 2018 Sync/ drwxrwxrwx 1 nobody users 96 Dec 31 2018 SyncWan/ drwxrwxr-x 1 nobody users 64 Aug 1 10:02 binhex-krusader/ drwxrwxr-x 1 nobody users 64 Aug 1 10:07 binhex-urbackup/ drwxrwxrwx 1 nobody users 80 Jun 26 23:27 clamav/ drwxrwxrwx 1 nobody users 44 Jul 19 20:44 grocy/ drwxrwxrwx 1 999 users 6642 Jul 31 15:29 mongodb/ drwxrwxrwx 1 nobody users 110 Dec 1 2018 unifi/
  6. I deleted the image from appdata, and re-downloaded the docker and left everything default with the exception of pointing /Media to an empty share. Still having the same problem. I have attached a screenshot of the config. ur docker log.txt
  7. I am having trouble using this docker. I have tried the default settings, changed to a custom IP and to a bridge. The docker runs but I can not access the ui. I have also tried changing the PUID and PGID to root user. Any suggestions? Windows client doesn't see the server either. ur docker log.txt
  8. I had the same problem on a server, the solution to it was to move all dockers on to their own vlan separate from the host. If your network is able to support a vlan it's definitely worth a try.
  9. Yes it was left on from initial install of the server. Went ahead and turned it back on to see what the logs look like when you start up telnet to unraid. It looks like this log entry is just opening up the session, not logging into the server itself. I have re-disabled it, thanks for the help.
  10. I am unsure if I should be concerned about this. I did not disable telnet upon installing this server and I have found in this entry in syslog, (while trying to diagnose another problem), for a telnet connection. The connection has come from a month old laptop. I have gone and disabled telnet on this service, however nothing in the log really tells me if anything was done. Any insight is greatly appreciated. Jun 26 18:40:30 LakeHouse01 kernel: nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. Jun 26 18:41:06 LakeHouse01 in.telnetd[26898]: connect from ( Jun 26 18:41:43 LakeHouse01 in.telnetd[27788]: connect from ( More concerned that some asus preinstalled crapware may have a man in the middle problem.
  11. Thanks for letting me know about that new feature. The server has dual redundant power supplies. I would hope both aren't part of the problem.
  12. I have an server that has been running well with the exception that randomly every few weeks I have to hard reset because it is entirely unresponsive. I have no clue where to start with this problem. It's more than losing network, the server locks up locally so I can't even log in to the local gui to try and diagnose the problem. Attached are the diagnostics. I did have to replace the usb drive a couple months ago. lakehouse01-diagnostics-20190526-2113.zip
  13. A new server I put together is filling up it's syslog really quickly (2days). The same error is repeating quite a bit and I can't find anything using google. Hoping the great community here can give some insight. Feb 13 05:21:23 LakeHouse01 kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Feb 13 05:21:23 LakeHouse01 kernel: mdcmd (299316): spindown 29 Feb 13 05:21:23 LakeHouse01 kernel: md: do_drive_cmd: disk29: ATA_OP e0 ioctl error: -5 Feb 13 05:21:24 LakeHouse01 kernel: mdcmd (299317): spindown 0 Feb 13 05:21:24 LakeHouse01 emhttpd: error: mdcmd, 2639: Input/output error (5): write lakehouse01-diagnostics-20190214-1908.zip
  14. Removing the second default fixed. Thanks so much Ken-Ji. Vlan required that the same ip address as primary be put in before it would allow me to remove the second route. After a reboot all good and working as expected.
  15. I had it setup originally with static IP on saturday however I could not access the shares. When I added the static route to the dhcp server for that subnet I could access the shares. This problem happened 24hrs later.
  16. Here you go lakehouse01-diagnostics-20190211-0732.zip
  17. I have setup a new server on a network with 2 vlan's. The problem is that the unraid host is not available on the primary vlan. I can access dockers and vm's with IP's on the same subnet just not the box itself. The unraid box is also available on it's host ip on the second subnet. What is even odder is I can ping the switch (from unraid cli) on the primary vlan but not the router. Switch to Unraid has a network bond with Primary vlan untagged and Second tagged. Primary Vlan subnet Unraid Host IP (unable to communicate) Docker IP (can communicate) Docker IP (can communicate) Docker with bridge (unable to communicate) Second Subnet Unraid Host IP (can communicate) Windows VM (can communicate) Any suggestions greatly appreciated.
  18. That fixed it no1home, found an option to turn on OS control. That is no letting me set the power setting to power save in unraid. Thank you for the help
  19. clowrym, if you ever figure out a solution please let us know. I don't think overall this will put too much of dent in the power bill but it would be nice to mitigate it.
  20. Yeah this did come from the fix common problems plugin. cpfreq-info in putty says no or unknown cpufreq driver is active on this cpu. I'm only a beginner at most of this so a lot is still over my head. Thanks for your help.
  21. Hello All, I've done a lot of searching for the fix to this but have had no luck. The OS says that no cpu scaling driver is installed. This is on a HP dl360 G6 with dual intel e5530 cpu's. If anyone can help that would be most appreciated. Thanks,
  22. Thanks a whole lot! I really did want to mess with flashing the card. A quick look a the 220 on HP's site makes it look like it should do the the sata III speeds/ 6gb. My plan was to plug the existing backplane into this card. https://www.hpe.com/h20195/V2/Getdocument.aspx?docname=c04111455 I haven't decided yet if I'm going to put a gpu into this server. I'd like too, but like you stated space is tight and I'm a bit jealous of your 2U compared to my 1U.
  23. Hey 1812, did you have to flash the H220 HBA? In looking up that card I came across another forum where the card needed to flashed. Thanks for the help.
  24. Thanks, I guess it's time to start look for a cheap card.